Kinetis Microcontrollers中的主题 Re: KINETIS TRAINING

KINETIS TRAINING

yadhukrishnanvm — Mon, 05 Sep 2016 13:32:33 GMT

Hello,

I really want to study how to write the code for all the drivers (like I2C,SPI,UART etc) of kinetis boards. Can anyone tell me is there any video,pdf or ppt for this purpose. I am a beginner to embedded system, so if anyone know this kind of document please send it me. Without a that I cannot understand how to write the code and how to configure the boards..so please...

Re: KINETIS TRAINING

yadhukrishnanvm — Thu, 08 Sep 2016 12:16:09 GMT

I have tried to load the board specific firmware image of TWR-K65F180M from the SEGGER - The Embedded Experts - Downloads - J-Link / J-Trace

but the board is not exiting from the bootloader mode.

Re: KINETIS TRAINING

kerryzhou — Tue, 13 Sep 2016 05:49:29 GMT

Hi Yadhukrishnan V M,

1.About the driver

You can use our KSDK2.0 for twr-k65f180, which can be downloaded from this link:

Welcome to Kinetis Expert | Kinetis Expert

Choose build an sdk, then choose the board as twr-k65f180, generate the according KSDK package.

2. About the JLINK firmware

Please use my attached Jlink firmware:JLink_OpenSDA_V2_2015-10-13.bin

1) board enter bootloader mode

Unplug the cable, then press the reset button, at the same time, plug the cable between PC and your tower board.

You will find your board is a device named as "BOOTLOADER"

2) Send JLink_OpenSDA_V2_2015-10-13.bin to BOOTLOADER, and wait it is finished.

3) unplug the cable and plug it again

You will find your board is a device named as JLINK, it means your firmware is updated successfully.

Wish it helps you!

If you still have question, please let me know!

Have a great day,
Jingjing

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: KINETIS TRAINING

yadhukrishnanvm — Tue, 13 Sep 2016 06:48:11 GMT

kerryzhou‌ Thank you... :smileyhappy: