Kinetis MicrocontrollersのトピックRe: Hi support! I am learning to programing a Kinetis K40 and traing to toggle a led using de comand Bit1_NegVal(). I recieve the error: expected expression before 'LDD_TDeviceData'. How a sove this problem? Thanks

Hi support! I am learning to programing a Kinetis K40 and traing to toggle a led using de comand Bit1_NegVal(). I recieve the error: expected expression before 'LDD_TDeviceData'. How a sove this problem? Thanks

lucianomoraes — Mon, 27 Jun 2016 21:02:47 GMT

Hi support! I am learning to programing a Kinetis K40 and traing to toggle a led using de comand Bit1_NegVal().

I recieve the error: expected expression before 'LDD_TDeviceData'.

How a sove this problem?

Thanks

Re: Hi support! I am learning to programing a Kinetis K40 and traing to toggle a led using de comand Bit1_NegVal(). I recieve the error: expected expression before 'LDD_TDeviceData'. How a sove this problem? Thanks

BlackNight — Tue, 28 Jun 2016 06:23:46 GMT

Hello,

can you share your project?

That message from the compiler sounds like you are not properly including the header file(s).

Erich

Re: Hi support! I am learning to programing a Kinetis K40 and traing to toggle a led using de comand Bit1_NegVal(). I recieve the error: expected expression before 'LDD_TDeviceData'. How a sove this problem? Thanks

lucianomoraes — Tue, 28 Jun 2016 18:45:01 GMT

Hi, Eric!

Yes, the project is attached.

thanks.

2016-06-28 3:24 GMT-03:00 BlackNight <admin@community.freescale.com>:

NXP Community
<https://community.freescale.com/resources/statics/1000/35400-NXP-Community-Email-banner-600x75.jpg>
Hi support! I am learning to programing a Kinetis K40 and traing to toggle
a led using de comand Bit1_NegVal(). I recieve the error: expected
expression before 'LDD_TDeviceData'. How a sove this problem? Thanks
reply from Erich Styger
<https://community.nxp.com/people/BlackNight?et=watches.email.thread> in *Kinetis
Microcontrollers* - View the full discussion
<https://community.nxp.com/message/806328?et=watches.email.thread#comment-806328>

Re: Hi support! I am learning to programing a Kinetis K40 and traing to toggle a led using de comand Bit1_NegVal(). I recieve the error: expected expression before 'LDD_TDeviceData'. How a sove this problem? Thanks

BlackNight — Tue, 28 Jun 2016 18:53:36 GMT

Hi Luciano,

I get an error because you try to call Bit1_NegVal() without the device handle (and this is not what you have in your screenshot):

void TI1_OnInterrupt(LDD_TUserData *UserDataPtr)
{
  /* Write your code here ... */
Bit1_NegVal();
}

Correct is:

void TI1_OnInterrupt(LDD_TUserData *UserDataPtr)
{
  /* Write your code here ... */
  Bit1_NegVal(Bit1_DeviceData);
}

Then things compile properly on my side.

Erich

Re: Hi support! I am learning to programing a Kinetis K40 and traing to toggle a led using de comand Bit1_NegVal(). I recieve the error: expected expression before 'LDD_TDeviceData'. How a sove this problem? Thanks

lucianomoraes — Tue, 28 Jun 2016 21:42:01 GMT

Thanks, Eric!

I will try to download in the TWR-KIT.

Luciano.

Em terça-feira, 28 de junho de 2016, BlackNight <

admin@community.freescale.com> escreveu:

NXP Community
<https://community.freescale.com/resources/statics/1000/35400-NXP-Community-Email-banner-600x75.jpg>
Hi support! I am learning to programing a Kinetis K40 and traing to toggle
a led using de comand Bit1_NegVal(). I recieve the error: expected
expression before 'LDD_TDeviceData'. How a sove this problem? Thanks
reply from Erich Styger
<https://community.nxp.com/people/BlackNight?et=watches.email.thread> in *Kinetis
Microcontrollers* - View the full discussion
<https://community.nxp.com/message/806725?et=watches.email.thread#comment-806725>