topic Re: Stuck at Starting target CPU in Kinetis Microcontrollers

Stuck at Starting target CPU

trilokjt — Tue, 26 Jul 2016 12:37:45 GMT

Hi Everyone,

I'm trying to create new Project using KDS ( Using KSDK 1.2.0), I have done Proper Clock and CPU settings and generated PE Code. But I'm unable to enter main of the program, I always gets stuck at Starting target CPU it wont move further . Please help out

Processor : MK60DN512VMD10

JTAG : J-Link Segger

IDE :

Kinetis Design Studio

Version: 3.2.0

Thank you/ Regards

Trilok

Re: Stuck at Starting target CPU

jeremyzhou — Wed, 27 Jul 2016 04:08:59 GMT

Hi Trilok,

Thank you for interest in NXP Semiconductor products and the opportunity to serve you.

I was wondering if you can share the demo, then I can replicate the issue on my site.
Have a great day,
Ping

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: Stuck at Starting target CPU

Robin_Shen — Wed, 27 Jul 2016 07:35:09 GMT

Hi Trilok,

I recommand you use the examples in KSDK2.0. (If you have not used it, please read Introducing Kinetis SDK v2 first.)

You can download and install it refer the methods in How to: install KSDK 2.0.

Best Regards,

Robin