Kinetis Microcontrollers中的主题 Re: Getting Started guide for FRDM-KW40Z IAR gives error message Fatal error: CPU did not power up

Kinetis Microcontrollers中的主题 Re: Getting Started guide for FRDM-KW40Z IAR gives error message Fatal error: CPU did not power up https://community.nxp.com/t5/Kinetis-Microcontrollers/Getting-Started-guide-for-FRDM-KW40Z-IAR-gives-error-message/m-p/499756#M31202 <HTML><HEAD></HEAD><BODY><P>For reference, here is a sample Debug Log:</P><P></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:26: Loaded macro file: C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.3\arm\config\debugger\Freescale\KLxx.dmac</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:27: Loaded macro file: C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.3\arm\config\flashloader\Freescale\FlashKW01.mac</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:27: Loading the CMSIS-DAP driver</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:27: Probe: CMSIS-DAP probe SW module ver 1.11</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:27: Probe: CMSIS-DAP S/N '0290ff039ED54E0F9E29B367' mapped to a number 00367.</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:27: EARM v.3.96</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:27: Emulation layer version 3.96</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:27: Notification to core-connect hookup.</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:27: MDM-AP detected</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:27: Probe: ConnectSpec='MBED CMSIS-DAP:0290ff039ED54E0F9E29B367:8-317CFB24-0-0000'.</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: Connecting to TAP#0 DAP AHB-AP-CM port 0 (IDR=0x4770031).</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: Recognized CPUID=0x410cc601 Cortex-M0+ r0p1 arch ARMv6-M</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: Debug resources: 2 instruction comparators, 2 data watchpoints.</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: CPU status OK</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: LowLevelReset(hardware, delay 200)</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: CPU status FAILED</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: CMD_INTERPRETER: failed</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.3\arm\config\debugger\Freescale\KLxx.dmac(82,17): Error: Operation error. </SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: Error while calling macro execUserCoreConnect</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: CMD_INTERPRETER: failed</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.3\arm\config\debugger\Freescale\KLxx.dmac(82,17): Error: Operation error. </SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: Error while calling macro execUserCoreConnect</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: CMD_INTERPRETER: failed</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.3\arm\config\debugger\Freescale\KLxx.dmac(82,17): Error: Operation error. </SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: Error while calling macro execUserCoreConnect</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: CMD_INTERPRETER: failed</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.3\arm\config\debugger\Freescale\KLxx.dmac(82,17): Error: Operation error. </SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: Error while calling macro execUserCoreConnect</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: CMD_INTERPRETER: failed</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.3\arm\config\debugger\Freescale\KLxx.dmac(82,17): Error: Operation error. </SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: Error while calling macro execUserCoreConnect</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: CMD_INTERPRETER: failed</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.3\arm\config\debugger\Freescale\KLxx.dmac(82,17): Error: Operation error. </SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: Error while calling macro execUserCoreConnect</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: CMD_INTERPRETER: failed</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.3\arm\config\debugger\Freescale\KLxx.dmac(82,17): Error: Operation error. </SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: Error while calling macro execUserCoreConnect</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: CMD_INTERPRETER: failed</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.3\arm\config\debugger\Freescale\KLxx.dmac(82,17): Error: Operation error. </SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: Error while calling macro execUserCoreConnect</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 16:02:52: Fatal error: CPU did not power up  Session aborted!</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 16:02:52: Unloaded macro file: C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.3\arm\config\flashloader\Freescale\FlashKW01.mac</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 16:02:53: Logging to file: C:\Freescale\KW40Z_Connectivity_Software_1.0.1\ConnSw\examples\ieee_802_15_4\MyWirelessApp\Coordinator\frdmkw40z\FreeRTOS\build\iar\cspycomm.log</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 16:02:53: Loading the CMSIS-DAP driver</SPAN></P></BODY></HTML> Tue, 09 Feb 2016 21:11:02 GMT tjoncas 2016-02-09T21:11:02Z Getting Started guide for FRDM-KW40Z IAR gives error message Fatal error: CPU did not power up https://community.nxp.com/t5/Kinetis-Microcontrollers/Getting-Started-guide-for-FRDM-KW40Z-IAR-gives-error-message/m-p/499755#M31201 <HTML><HEAD></HEAD><BODY><P>When following the Getting Started guide for FRDM-KW40Z (<A href="http://www.nxp.com/products/software-and-tools/hardware-development-tools/freedom-development-boards/freescale-freedom-development-platform-for-kinetis-kw40z-30z-20z-mcus:FRDM-KW40Z?tab=In-Depth_Tab" title="http://www.nxp.com/products/software-and-tools/hardware-development-tools/freedom-development-boards/freescale-freedom-development-platform-for-kinetis-kw40z-30z-20z-mcus:FRDM-KW40Z?tab=In-Depth_Tab">NXP Freedom Development Platform for Kinetis |NXP</A> ), upon reaching step 3 "build and run", using ANY of the sample projects, during the step to download and debug (see <A href="http://cache.nxp.com/files/32bit/doc/user_guide/MKW40ZSMACSW303QSG.pdf" title="http://cache.nxp.com/files/32bit/doc/user_guide/MKW40ZSMACSW303QSG.pdf">http://cache.nxp.com/files/32bit/doc/user_guide/MKW40ZSMACSW303QSG.pdf</A> ), I get a message box that says "Fatal error: CPU did not power up. Session aborted."  I notice in the debugger log that the last line before an error is always "Loading the CMSIS-DAP driver ".  Both boards definitely work with the pre-programmed sample program so I don't think they came dead on arrival.  Does anyone have any advice?</P></BODY></HTML> Tue, 09 Feb 2016 21:05:22 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/Getting-Started-guide-for-FRDM-KW40Z-IAR-gives-error-message/m-p/499755#M31201 tjoncas 2016-02-09T21:05:22Z Re: Getting Started guide for FRDM-KW40Z IAR gives error message Fatal error: CPU did not power up https://community.nxp.com/t5/Kinetis-Microcontrollers/Getting-Started-guide-for-FRDM-KW40Z-IAR-gives-error-message/m-p/499756#M31202 <HTML><HEAD></HEAD><BODY><P>For reference, here is a sample Debug Log:</P><P></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:26: Loaded macro file: C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.3\arm\config\debugger\Freescale\KLxx.dmac</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:27: Loaded macro file: C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.3\arm\config\flashloader\Freescale\FlashKW01.mac</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:27: Loading the CMSIS-DAP driver</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:27: Probe: CMSIS-DAP probe SW module ver 1.11</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:27: Probe: CMSIS-DAP S/N '0290ff039ED54E0F9E29B367' mapped to a number 00367.</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:27: EARM v.3.96</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:27: Emulation layer version 3.96</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:27: Notification to core-connect hookup.</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:27: MDM-AP detected</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:27: Probe: ConnectSpec='MBED CMSIS-DAP:0290ff039ED54E0F9E29B367:8-317CFB24-0-0000'.</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: Connecting to TAP#0 DAP AHB-AP-CM port 0 (IDR=0x4770031).</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: Recognized CPUID=0x410cc601 Cortex-M0+ r0p1 arch ARMv6-M</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: Debug resources: 2 instruction comparators, 2 data watchpoints.</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: CPU status OK</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: LowLevelReset(hardware, delay 200)</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: CPU status FAILED</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: CMD_INTERPRETER: failed</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.3\arm\config\debugger\Freescale\KLxx.dmac(82,17): Error: Operation error. </SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: Error while calling macro execUserCoreConnect</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: CMD_INTERPRETER: failed</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.3\arm\config\debugger\Freescale\KLxx.dmac(82,17): Error: Operation error. </SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: Error while calling macro execUserCoreConnect</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: CMD_INTERPRETER: failed</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.3\arm\config\debugger\Freescale\KLxx.dmac(82,17): Error: Operation error. </SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: Error while calling macro execUserCoreConnect</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: CMD_INTERPRETER: failed</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.3\arm\config\debugger\Freescale\KLxx.dmac(82,17): Error: Operation error. </SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: Error while calling macro execUserCoreConnect</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: CMD_INTERPRETER: failed</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.3\arm\config\debugger\Freescale\KLxx.dmac(82,17): Error: Operation error. </SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: Error while calling macro execUserCoreConnect</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: CMD_INTERPRETER: failed</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.3\arm\config\debugger\Freescale\KLxx.dmac(82,17): Error: Operation error. </SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: Error while calling macro execUserCoreConnect</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: CMD_INTERPRETER: failed</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.3\arm\config\debugger\Freescale\KLxx.dmac(82,17): Error: Operation error. </SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: Error while calling macro execUserCoreConnect</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: CMD_INTERPRETER: failed</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.3\arm\config\debugger\Freescale\KLxx.dmac(82,17): Error: Operation error. </SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 15:57:28: Error while calling macro execUserCoreConnect</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 16:02:52: Fatal error: CPU did not power up  Session aborted!</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 16:02:52: Unloaded macro file: C:\Program Files (x86)\IAR Systems\Embedded Workbench 7.3\arm\config\flashloader\Freescale\FlashKW01.mac</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 16:02:53: Logging to file: C:\Freescale\KW40Z_Connectivity_Software_1.0.1\ConnSw\examples\ieee_802_15_4\MyWirelessApp\Coordinator\frdmkw40z\FreeRTOS\build\iar\cspycomm.log</SPAN></P><P><SPAN style="font-size: 8pt; font-family: 'courier new', courier;">Tue Feb 09, 2016 16:02:53: Loading the CMSIS-DAP driver</SPAN></P></BODY></HTML> Tue, 09 Feb 2016 21:11:02 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/Getting-Started-guide-for-FRDM-KW40Z-IAR-gives-error-message/m-p/499756#M31202 tjoncas 2016-02-09T21:11:02Z Re: Getting Started guide for FRDM-KW40Z IAR gives error message Fatal error: CPU did not power up https://community.nxp.com/t5/Kinetis-Microcontrollers/Getting-Started-guide-for-FRDM-KW40Z-IAR-gives-error-message/m-p/499757#M31203 <HTML><HEAD></HEAD><BODY><P>Hi Tom,</P><P></P><P>I recommend to take a look to this previous threat.</P><P><A href="https://community.nxp.com/thread/384486">Fatel error:cpu did not power up session aborted!</A> <A _jive_internal="true" href="https://community.nxp.com/thread/3844861" title="https://community.freescale.com/thread/3844861"><BR /></A></P><P></P><P>It shows the resolution for the same problem with another customer.</P><P></P><P>I hope this information helps.</P></BODY></HTML> Thu, 11 Feb 2016 21:12:01 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/Getting-Started-guide-for-FRDM-KW40Z-IAR-gives-error-message/m-p/499757#M31203 franciscomezana 2016-02-11T21:12:01Z