topic Re: frdm k64 board software requirement in Kinetis Microcontrollers

frdm k64 board software requirement

mukeshprasad — Wed, 04 May 2016 13:09:18 GMT

Can u help what tools required for this board for any development related debugging any external hardware required .

Re: frdm k64 board software requirement

TICS_Fiona — Thu, 05 May 2016 07:15:02 GMT

Hello Mukesh

To develop FRDM-K64F, you can use CodeWarrior or KDS as IDE.

CodeWarrior can be downloaded from:

http://tinyurl.com/6jo5tge

KDS can be downloaded from:

http://tinyurl.com/gvbsajz

And we also supplied SDK package to speed the development:

http://tinyurl.com/zq5u4jn

FRDM-K64F integrated OpenSDA on it, so user does not need to purchase an emulator since both CodeWarrior and KDS supports OpenSDA. You can also select the emulators as below:

1) P&E USB Multilink Universal and USB Multilink Universal FX debug adapters

http://www.pemicro.com/universal/

2) SEGGER J-Link and J-Trace debug adapters

https://www.segger.com/jlink-debug-probes.html

Hope this helps!

Best Regards

Fiona Kuang

TIC - Technical Information Center

Re: frdm k64 board software requirement

ivadorazinova — Thu, 05 May 2016 08:15:01 GMT

Hi Mukesh,

To adding Fiona´s answer:

I would recommend you start with OpenSDAv2 firmware.

You don´t need any external debugger.

Please,check the document https://mcuoneclipse.com/2014/04/27/segger-j-link-firmware-for-opensdav2/

I hope this helps.

Best Regards,

Iva