MK64 : Is Program flash 0 IFR map modified by " Program Partition command "

koichisakagami — Mon, 02 May 2016 08:50:06 GMT

Dear community,
I am checking a MK64FX512VLL12 behavior .

After issuing the " Program Partition command ",
Is the Program flash 0 IFR map content changed ?

As far as I was confirmed, the content had not changed.

Best Regards,

Koichi Sakagami

Re: MK64 : Is Program flash 0 IFR map modified by " Program Partition command "

Hui_Ma — Wed, 04 May 2016 08:26:51 GMT

The K64 product Flash with FlexNVM has program flash and data flash.

The " Program Partition command " will modify the [EEPROM Data Set Size] & [FlexNVM Partition Code] at Data flash 0 IFR.

The program flash 0 IFR value will not be affected.

Wish it helps.

Have a great day,
Ma Hui
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

topic MK64 : Is Program flash 0 IFR map modified by " Program Partition command " in Kinetis Microcontrollers

MK64 : Is Program flash 0 IFR map modified by " Program Partition command "

Re: MK64 : Is Program flash 0 IFR map modified by " Program Partition command "