Kinetis MicrocontrollersのトピックTrouble with load JLink_OpenSDA_V2_1_2015-10-13.bin into FRDM-K82F

Trouble with load JLink_OpenSDA_V2_1_2015-10-13.bin into FRDM-K82F

zahomz — Thu, 25 Feb 2016 03:07:26 GMT

I'm trying to use FRDM-K82F, and fllow the step from "http://www.nxp.com/products/software-and-tools/run-time-software/kinetis-software-and-tools/ides-for-kinetis-mcus/freescale-freedom-development-platform-for-kinetis-k82-k81-and-k80-mcus:FRDM-K82F?tab=In-Depth_Tab&uc=true&lang_cd=en#BuildRun":

3.2 Build, Run and Debug SDK Examples->Use Kinetis Design Studio->4. Run a Demo Application.

When I Drag and drop the "JLink_OpenSDA_V2_1_2015-10-13.bin" file into the bootloader drive, the operation is failed and FRDM-K82F couldn't poweron.

Any suggestions for how to find/fix the problem?

Thanks,

Zahom

Re: Trouble with load JLink_OpenSDA_V2_1_2015-10-13.bin into FRDM-K82F

jeremyzhou — Fri, 26 Feb 2016 05:58:05 GMT

Hi Zahom,

I've attached the JLink_OpenSDA_V2_1.bin, please try it when you force the OpenSDA interface into the bootloader driver again.
Have a great day,
Ping

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: Trouble with load JLink_OpenSDA_V2_1_2015-10-13.bin into FRDM-K82F

zahomz — Fri, 26 Feb 2016 06:09:53 GMT

Hi, jeremyzhou,

Thanks for your help. But because of the problem, my board couldn't poweon now. How could I resolve this problem? (Windows couldn't find the bootlader drive.)

Re: Trouble with load JLink_OpenSDA_V2_1_2015-10-13.bin into FRDM-K82F

jeremyzhou — Fri, 26 Feb 2016 06:15:43 GMT

Hi Zahom,

Thanks for your reply.

I'd highly recommend that you can use the multmeter to check the hardware circuit of the board according to the its sch.

http://cache.nxp.com/files/32bit/hardware_tools/schematics/FRDM-K82F-SCH.pdf

Hope it helps.
Have a great day,

Ping

Re: Trouble with load JLink_OpenSDA_V2_1_2015-10-13.bin into FRDM-K82F

zahomz — Fri, 04 Mar 2016 00:53:08 GMT

Hi, jeremyzhou,

I haven't resolve this problem, but I use j-link to program the flash now.

Thanks for your help!

Re: Trouble with load JLink_OpenSDA_V2_1_2015-10-13.bin into FRDM-K82F

rushirajjawale — Sun, 24 Apr 2016 19:26:37 GMT

zahomz I'm facing the same problem. Please help. the K82 freedom board doesn't power up. No lED glows. I'm unable to enter the bootloader mode.
I checked with multimeter, the board is getting +5V from the usb.
Please help

Re: Trouble with load JLink_OpenSDA_V2_1_2015-10-13.bin into FRDM-K82F

zahomz — Mon, 25 Apr 2016 12:02:29 GMT

Hi, Rushiraj,

I haven't solve my problem, but finally I use JLink to program the k82 by SWD.

Hope this could help you!

Re: Trouble with load JLink_OpenSDA_V2_1_2015-10-13.bin into FRDM-K82F

rushirajjawale — Thu, 28 Apr 2016 11:36:55 GMT

zahomz You use JLink means?

Are you using the JLink JTAG Debugger?

It costs a lot I cannot buy that debugger. :smileysad: