topic Re: MKL46Z programming question. in Kinetis Microcontrollers https://community.nxp.com/t5/Kinetis-Microcontrollers/MKL46Z-programming-question/m-p/485177#M29786 <HTML><HEAD></HEAD><BODY><P>Have a look here if you don't want to buy an external programmer:</P><P></P><P><A href="http://mcuoneclipse.com/2013/04/21/using-the-freedom-board-as-jtag-programmer/" title="http://mcuoneclipse.com/2013/04/21/using-the-freedom-board-as-jtag-programmer/">Using the Freedom Board as SWD Programmer | MCU on Eclipse</A></P><P><A href="http://mcuoneclipse.com/2013/10/22/using-the-frdm-kl25z-with-cmsis-dap-to-program-non-freescale-arm-microcontrollers/" title="http://mcuoneclipse.com/2013/10/22/using-the-frdm-kl25z-with-cmsis-dap-to-program-non-freescale-arm-microcontrollers/">Using the FRDM-KL25Z with CMSIS-DAP to program non-Freescale ARM Microcontrollers | MCU on Eclipse</A> </P><P></P><P>You will need to connect the SWD pins + VCC + GND from your MCU to the FRDM/programmer.</P><P></P><P>Regards,</P><P></P><P>Santiago</P></BODY></HTML> Thu, 17 Mar 2016 16:23:47 GMT santiago_gonzal 2016-03-17T16:23:47Z MKL46Z programming question. https://community.nxp.com/t5/Kinetis-Microcontrollers/MKL46Z-programming-question/m-p/485176#M29785 <HTML><HEAD></HEAD><BODY><P><BR />I'm looking to layout my own PCB and program an mkl46z256vll4 on it. I've been working with the FRDM development board for the micro and I have my code written in KDS 3.0. I've been using the openOCD to debug/flash the micro. Now I'm looking to layout a basic breakout board with just the micro, a crystal, decoupling caps, and a couple LEDs that I could flash to confirm that I can properly program the micro. After reading the OpenSDA User's Guide linked to from the kl46z page it looks like I would need an OpenSDA MCU to act as an arbitrator between my PC and the kl46z's SWD. I was hoping to program the kl46z directly.</P><P>Do I need to purchase a separate programmer to do this?</P><P>Any advice you could give or additional explanation would be appreciated.</P></BODY></HTML> Thu, 17 Mar 2016 15:11:54 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/MKL46Z-programming-question/m-p/485176#M29785 owlsnest 2016-03-17T15:11:54Z Re: MKL46Z programming question. https://community.nxp.com/t5/Kinetis-Microcontrollers/MKL46Z-programming-question/m-p/485177#M29786 <HTML><HEAD></HEAD><BODY><P>Have a look here if you don't want to buy an external programmer:</P><P></P><P><A href="http://mcuoneclipse.com/2013/04/21/using-the-freedom-board-as-jtag-programmer/" title="http://mcuoneclipse.com/2013/04/21/using-the-freedom-board-as-jtag-programmer/">Using the Freedom Board as SWD Programmer | MCU on Eclipse</A></P><P><A href="http://mcuoneclipse.com/2013/10/22/using-the-frdm-kl25z-with-cmsis-dap-to-program-non-freescale-arm-microcontrollers/" title="http://mcuoneclipse.com/2013/10/22/using-the-frdm-kl25z-with-cmsis-dap-to-program-non-freescale-arm-microcontrollers/">Using the FRDM-KL25Z with CMSIS-DAP to program non-Freescale ARM Microcontrollers | MCU on Eclipse</A> </P><P></P><P>You will need to connect the SWD pins + VCC + GND from your MCU to the FRDM/programmer.</P><P></P><P>Regards,</P><P></P><P>Santiago</P></BODY></HTML> Thu, 17 Mar 2016 16:23:47 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/MKL46Z-programming-question/m-p/485177#M29786 santiago_gonzal 2016-03-17T16:23:47Z Re: MKL46Z programming question. https://community.nxp.com/t5/Kinetis-Microcontrollers/MKL46Z-programming-question/m-p/485178#M29787 <HTML><HEAD></HEAD><BODY><P>Hi Todd,</P><P></P><P>In case you want to buy an external programmer here are some options:</P><P></P><P>P&amp;E U-Multilink: <A href="http://www.nxp.com/products/interface-and-connectivity/wireless-connectivity/sub-1-ghz-wireless-solutions/universal-multilink-development-interface:UMultilink" title="http://www.nxp.com/products/interface-and-connectivity/wireless-connectivity/sub-1-ghz-wireless-solutions/universal-multilink-development-interface:UMultilink">Universal Multilink Development Interface|NXP</A> </P><P>U-Multilink FX: <A href="http://www.nxp.com/products/interface-and-connectivity/wireless-connectivity/sub-1-ghz-wireless-solutions/universal-multilink-fx-high-speed-development-interface:U-MULTILINK-FX" title="http://www.nxp.com/products/interface-and-connectivity/wireless-connectivity/sub-1-ghz-wireless-solutions/universal-multilink-fx-high-speed-development-interface:U-MULTILINK-FX">Universal Multilink FX High-Speed Development|NXP</A> </P><P>Segger J-link: <A href="https://www.segger.com/jlink-debug-probes.html" title="https://www.segger.com/jlink-debug-probes.html">SEGGER - The Embedded Experts</A> </P><P></P><P>Hope it helps!</P><P></P><P>Best Regards,</P><P>Carlos Mendoza</P><P>Technical Support Engineer</P></BODY></HTML> Thu, 17 Mar 2016 23:04:45 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/MKL46Z-programming-question/m-p/485178#M29787 Carlos_Mendoza 2016-03-17T23:04:45Z