FTM Stop/Start

Mike_d — Tue, 31 Jan 2012 05:18:18 GMT

Anybody know how to start and stop FTM0. I would like to also have control of the idle state of the line.

Thanks,

-Mike

Re: FTM Stop/Start

Mike_d — Tue, 31 Jan 2012 05:51:18 GMT

Big Module but I found it.

-----------------

FTM0_POL= (0 | FTM_POL_POL0_MASK);//Inactive state of CH0 is high

if(FTM0_OUTMASK & FTM_OUTMASK_CH0OM_MASK)
{
printf("Enable Output\r\n");
FTM0_OUTMASK &= ~FTM_OUTMASK_CH0OM_MASK;
}
else
{
printf("Disable Output\r\n");
FTM0_OUTMASK |= FTM_OUTMASK_CH0OM_MASK;
}

topic FTM Stop/Start in Kinetis Microcontrollers

FTM Stop/Start

Re: FTM Stop/Start