topic Re: FRDM-K22F-AGM01 sensor toolbox file missing in Kinetis Microcontrollers

FRDM-K22F-AGM01 sensor toolbox file missing

tangoalfa — Thu, 07 Jan 2016 14:32:04 GMT

I am testing a FRDM-K22F board with the FRDM-STBC-AGM01 shield and sensor toolbox. It looks like the file:

SupportingFiles\FirmwareFiles\Binaries\ISF_K22F_AGM01.bin

is missing. I have Rev 2.5.2.0 of the Kinetis Interface Tool

Re: FRDM-K22F-AGM01 sensor toolbox file missing

kerryzhou — Fri, 08 Jan 2016 04:26:26 GMT

Hi Todd Allen,

If you can't find the firmware of K22, you can use the K22 apps project then download the code to your K22 directly.

The link is:

ISF for Kinetis using KDS|NXP

You can download APPS->

ISF2P1_K22F_KDS_SF_PROJ

This is the KDS project.

Wish it helps you!

If you still have question, please let me know!

Have a great day,
Jingjing

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: FRDM-K22F-AGM01 sensor toolbox file missing

tangoalfa — Wed, 13 Jan 2016 15:23:06 GMT

OK thanks, I think I'm closer.

I installed the ISF2P1_K22F_KDS_SF_PROJ, but it wouldn't build. Apparently I'm missing files in directories:

KDS_3.0.0\eclipse\ProcessorExpert\libKinetis\pdd_100434\inc, and

KDS_3.0.0\eclipse\ProcessorExpert\libKinetis\pdd2\MK22FN512LH12\system

I tried installing the 2 framework packages, "ISF R2.1 Installer" and "ISF R2P1 PEx.PEupd", but that didn't seem to help.

Re: FRDM-K22F-AGM01 sensor toolbox file missing

kerryzhou — Thu, 14 Jan 2016 03:23:35 GMT

Hi Todd Allen,

Did you use the KDS3.0 version? You can download it from this link:

Kinetis Design Studio Integrated Development |NXP

Besides, you can download the KSDK1.3.0 from this link:

Software Development Kit for Kinetis MCUs|NXP

Then configure the KDS with KSDK at first, for the detais, please refer to the document from KSDK1.3.0, the path is :C:\Freescale\KSDK_1.3.0\doc

Getting Started with Kinetis SDK (KSDK) v.1.3, page 18, instal the eclipse update at first .

After the KDS configuration, please test it again.

Wish it helps you!

If you still have question, please let me know!

Have a great day,
Jingjing

-----------------------------------------------------------------------------------------------------------------------

Note: If this post answers your question, please click the Correct Answer button. Thank you!

----------------------------------------------------------------------------------------------------------------------