Kinetis MicrocontrollersのトピックRe: Uart Issue, FRDM-K64F

Uart Issue, FRDM-K64F

ashishsingh0784 — Thu, 28 Jan 2016 11:18:12 GMT

Hi Community,

Please help me for below issue.

Following line sending only first letter K 5 times.

unsigned char str[] = "Kumar Rishi\r\n";

UART_DRV_SendData(UART0_IDX, str, 5);

Function:

uart_status_t UART_DRV_SendData(uint32_t instance, const uint8_t * txBuff,

uint32_t txSize)

{

assert(txBuff);

assert(instance < UART_INSTANCE_COUNT);

uart_status_t retVal = kStatus_UART_Success;

uart_state_t * uartState = (uart_state_t *)g_uartStatePtr[instance];

/* Indicates current transaction is non-blocking */

uartState->isTxBlocking = false;

/* Start the transmission process */

retVal = UART_DRV_StartSendData(instance, txBuff, txSize);

return retVal; }

static uart_status_t UART_DRV_StartSendData(uint32_t instance, const uint8_t * txBuff,

uint32_t txSize)

{

assert(instance < UART_INSTANCE_COUNT);

UART_Type * base = g_uartBase[instance];

uart_state_t * uartState = (uart_state_t *)g_uartStatePtr[instance];

/* Check that we're not busy already transmitting data from a previous

* function call. */

if (uartState->isTxBusy)

{

return kStatus_UART_TxBusy;

}

if (txSize == 0U)

{

return kStatus_UART_NoDataToDeal;

}

/* Initialize the module driver state structure. */

uartState->txBuff = txBuff;

uartState->txSize = txSize;

uartState->isTxBusy = true;

/* Enable the transmitter data register empty interrupt. The TDRE flag will

* set whenever the TX buffer is emptied into the TX shift register (for

* non-FIFO IPs) or when the data in the TX FIFO is at or below the

* programmed watermark (for FIFO-supported IPs). */

UART_BWR_C2_TIE(base, 1U);

return kStatus_UART_Success;

}

Re: Uart Issue, FRDM-K64F

Alice_Yang — Wed, 03 Feb 2016 03:45:01 GMT

Hello Singh,

I checked you use the KSDK.

Please use the function of "UART_DRV_SendDataBlocking" to send a sting .

A blocking (also known as synchronous) function means that the function does

not return until the transmit is complete.

While the function UART_DRV_SendData ,

means that the function

* returns immediately after initiating the transmit function. The application

* has to get the transmit status to see when the transmit is complete. In

* other words, after calling non-blocking (asynchronous) send function, the

* application must get the transmit status to check if transmit is completed

* or not.

This meaning in the period of send data , if something else occur , the send will be some error,

for example some interrupt occur . So , please use the function of "UART_DRV_SendDataBlocking".

About the usage of this function , please refer to the demo code at here :

KSDK_1.3.0\examples\frdmk64f\driver_examples\uart\uart_blocking

Hope it helps

Have a great day,
Alice Yang

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: Uart Issue, FRDM-K64F

Jorge_Gonzalez — Tue, 09 Feb 2016 02:35:11 GMT

Hello Ashish Singh:

Is your issue resolved?

As mentioned by Alice, you can use the KSDK UART example projects as starting point, either the blocking or non-blocking examples:

C:\Freescale\KSDK_1.3.0\examples\frdmk64f\driver_examples\uart

If you still face issues after checking the examples please share your project so I can have a look and see what you are missing.

Regards!

Jorge Gonzalez