topic Re: converter from CAN to UART in Kinetis Microcontrollers https://community.nxp.com/t5/Kinetis-Microcontrollers/converter-from-CAN-to-UART/m-p/458613#M27412 <HTML><HEAD></HEAD><BODY><P>Hi Kent,</P><P>Please go ahead to find some information about the CAN transceivers through the link as below.</P><P><A href="http://www.freescale.com/products/analog-power-management/transceivers/can-physical-interfaces:NWCAN?cof=0&amp;am=0" title="http://www.freescale.com/products/analog-power-management/transceivers/can-physical-interfaces:NWCAN?cof=0&amp;am=0">CAN Physical Interfaces|Freescale</A><BR />Have a great day,</P><P>Ping</P><P>-----------------------------------------------------------------------------------------------------------------------<BR />Note: If this post answers your question, please click the Correct Answer button. Thank you!<BR />-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Thu, 05 Nov 2015 08:06:43 GMT jeremyzhou 2015-11-05T08:06:43Z converter from CAN to UART https://community.nxp.com/t5/Kinetis-Microcontrollers/converter-from-CAN-to-UART/m-p/458612#M27411 <HTML><HEAD></HEAD><BODY><P>hi, If Freescal have one chip, can realize c<SPAN style="color: #e23d39;">onvter CAN bus to UART</SPAN>, it don' need to program. TKS~ Kent</P></BODY></HTML> Thu, 05 Nov 2015 06:53:33 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/converter-from-CAN-to-UART/m-p/458612#M27411 kentgu 2015-11-05T06:53:33Z Re: converter from CAN to UART https://community.nxp.com/t5/Kinetis-Microcontrollers/converter-from-CAN-to-UART/m-p/458613#M27412 <HTML><HEAD></HEAD><BODY><P>Hi Kent,</P><P>Please go ahead to find some information about the CAN transceivers through the link as below.</P><P><A href="http://www.freescale.com/products/analog-power-management/transceivers/can-physical-interfaces:NWCAN?cof=0&amp;am=0" title="http://www.freescale.com/products/analog-power-management/transceivers/can-physical-interfaces:NWCAN?cof=0&amp;am=0">CAN Physical Interfaces|Freescale</A><BR />Have a great day,</P><P>Ping</P><P>-----------------------------------------------------------------------------------------------------------------------<BR />Note: If this post answers your question, please click the Correct Answer button. Thank you!<BR />-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Thu, 05 Nov 2015 08:06:43 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/converter-from-CAN-to-UART/m-p/458613#M27412 jeremyzhou 2015-11-05T08:06:43Z Re: converter from CAN to UART https://community.nxp.com/t5/Kinetis-Microcontrollers/converter-from-CAN-to-UART/m-p/458614#M27413 <HTML><HEAD></HEAD><BODY><P>Hi Jerremy,</P><P>Yes, you are right. we can use CAN transciever. but it just realize to CANRx, CANTx signal to differentiial signal. can't convert CAN protocol to UART protco..</P><P></P><P>TKS~ </P><P>Kent</P></BODY></HTML> Thu, 05 Nov 2015 23:59:21 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/converter-from-CAN-to-UART/m-p/458614#M27413 kentgu 2015-11-05T23:59:21Z