topic Re: FRDM-KL26Z - Can't install PE Micro SDA? in Kinetis Microcontrollers

FRDM-KL26Z - Can't install PE Micro SDA?

Deejay — Sun, 07 Jun 2015 10:06:30 GMT

Hi,

I'm trying to install the PE Micro OpenSDA debugger (MSD-DEBUG-FRDM-KL26Z_Pemicro_v114.SDA) on my KL26Z brd but no luck.

Previously, I had the J-Link OpenSDA debugger installed and now it is not updating... I still see the J-Link Debug on the Device Manager. Any clue?

Thanks.

Re: FRDM-KL26Z - Can't install PE Micro SDA?

BlackNight — Sun, 07 Jun 2015 11:25:06 GMT

So your board shows still the Segger firmware installed on it. I think you might have missed a step, or not followed closely the instructions to update the firmware.

This article might help you: Illustrated Step-by-Step Instructions: Updating the Freescale Freedom Board Firmware | MCU on Eclipse

I hope this helps,

Erich

Re: FRDM-KL26Z - Can't install PE Micro SDA?

Deejay — Sun, 07 Jun 2015 11:55:50 GMT

Hi Erich,

In fact, when I extracted the BOOTUPDATEAPP_Pemicro_v111.SDA, this must have been corrupted or something strange happened to it.

I had to download it again. All working good and thanks again for your response.

Cheers!

Devan