Using PEG Evaluation Software in KDS 3.0.0

michaelsteffenf — Thu, 03 Sep 2015 19:49:14 GMT

All,

The Peg evaluation software that interfaces with our TWR-LCD, and our TWR-RGB-LCD boards need to be compiled and ran in KDS version 2.0.0.

The fix below is for the "PEGPLUS_evaluation_for_TWR_K70F120M".

If you load the firmware in KDS 3.0.0, you'll get these errors:

Here is what you'll need to do to fix them:

1. Import project into KDS 3.0.0:

Start the “KDS Upgrade assistant”

Use the following options:

o Semihosting
support: nonsys (-specs=nosys.specs)

2. Update the linker file:

Replace with the .ld file (attached)

Modify the existing .ld file by adding the following line to the end of the .ld
file (inside the curly brackets)

“PROVIDE ( end = . );”

Hope this helps-

Michael Steffen

Senior Field Applications Engineer

Member of the Technical Staff

Freescale

Original Attachment has been moved to: MK70FN1M0xxx12_flash.ld.zip

Kinetis Microcontrollers中的主题 Using PEG Evaluation Software in KDS 3.0.0