Kinetis MicrocontrollersのトピックRe: uart using CTS and RTS https://community.nxp.com/t5/Kinetis-Microcontrollers/uart-using-CTS-and-RTS/m-p/421989#M24174 <HTML><HEAD></HEAD><BODY><P>Hi David,</P><P></P><P>Are you still having this issue?</P><P></P><P>Best Regards,</P><P></P><P>Isaac</P></BODY></HTML> Fri, 31 Jul 2015 13:45:35 GMT isaacavila 2015-07-31T13:45:35Z uart using CTS and RTS https://community.nxp.com/t5/Kinetis-Microcontrollers/uart-using-CTS-and-RTS/m-p/421987#M24172 <HTML><HEAD></HEAD><BODY><P>hello, i have a trouble using CTS and RTS. I used the normal configuration with interrupt from the KMSWDRVAPIRM_SW's drivers and go well, but when I try it using the other way, I am not sure if it go well. My microcontroller belong to MKMxxZxxACxx5RM's family. Just making the configuration of the CTS and RTS, I did it using UARTx_MODEM.</P><P></P><P>Any idea?</P><P></P><P>Thanks for advance.</P></BODY></HTML> Fri, 17 Jul 2015 15:31:26 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/uart-using-CTS-and-RTS/m-p/421987#M24172 davidmartínezag 2015-07-17T15:31:26Z Re: uart using CTS and RTS https://community.nxp.com/t5/Kinetis-Microcontrollers/uart-using-CTS-and-RTS/m-p/421988#M24173 <HTML><HEAD></HEAD><BODY><P>Hello David,</P><P></P><P>Could you attach your project? Need to see your UART configuration.</P><P>Also, I would like to know it your are using TWR-KM34Z50MV3 hardware.</P><P></P><P>Best Regards,</P><P>Isaac</P></BODY></HTML> Fri, 17 Jul 2015 18:54:20 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/uart-using-CTS-and-RTS/m-p/421988#M24173 isaacavila 2015-07-17T18:54:20Z Re: uart using CTS and RTS https://community.nxp.com/t5/Kinetis-Microcontrollers/uart-using-CTS-and-RTS/m-p/421989#M24174 <HTML><HEAD></HEAD><BODY><P>Hi David,</P><P></P><P>Are you still having this issue?</P><P></P><P>Best Regards,</P><P></P><P>Isaac</P></BODY></HTML> Fri, 31 Jul 2015 13:45:35 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/uart-using-CTS-and-RTS/m-p/421989#M24174 isaacavila 2015-07-31T13:45:35Z Re: uart using CTS and RTS https://community.nxp.com/t5/Kinetis-Microcontrollers/uart-using-CTS-and-RTS/m-p/421990#M24175 <HTML><HEAD></HEAD><BODY><P>sorry for not responding before, i had holidays. Finally i got to find a solution. Thanks.</P></BODY></HTML> Mon, 31 Aug 2015 13:34:37 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/uart-using-CTS-and-RTS/m-p/421990#M24175 davidmartínezag 2015-08-31T13:34:37Z