Kinetis Microcontrollers中的主题 Re: Secured & Mass Erase Disabled Kinetis K60N512 Device

Kinetis Microcontrollers中的主题 Re: Secured & Mass Erase Disabled Kinetis K60N512 Device https://community.nxp.com/t5/Kinetis-Microcontrollers/Secured-Mass-Erase-Disabled-Kinetis-K60N512-Device/m-p/194337#M2415 <HTML><HEAD></HEAD><BODY><P>Hello,</P><P></P><P>Have you trid with JTAG connector instead of using SWD?</P><P></P><P>Best Regards,</P><P></P><P>Luis</P></BODY></HTML> Mon, 17 Sep 2012 14:48:08 GMT LuisCasado 2012-09-17T14:48:08Z Secured & Mass Erase Disabled Kinetis K60N512 Device https://community.nxp.com/t5/Kinetis-Microcontrollers/Secured-Mass-Erase-Disabled-Kinetis-K60N512-Device/m-p/194334#M2412 <HTML><HEAD></HEAD><BODY><P>Hi</P><P></P><P>I am working on TWR-K60N512 board. It was working fine some days ago but due to growing size of code, </P><P>Flash Configuration Filed (0x400 to 0x40C) of Program Flash Area has been updated accidentally. </P><P>Now I am unable to connect to the board and load the program in Program Flash. </P><P></P><P>********************************************************************************************</P><P>When I try to connect using JLINK (JLink.exe), Following message is displayed. </P><P>********************************************************************************************</P><P></P><P>SEGGER J-Link Commander V4.42b ('?' for help)</P><P>Compiled Feb 14 2012 15:27:02</P><P>DLL version V4.42b, compiled Feb 14 2012 15:26:46</P><P>Firmware: J-Link ARM V8 compiled Aug  1 2012 13:40:47</P><P>Hardware: V8.00</P><P>S/N: 58006903</P><P>VTarget = 3.267V</P><P>Info: TotalIRLen = 4, IRPrint = 0x01</P><P>Info: ARM AP[0]: 0x24770011, AHB-AP</P><P>Info: ARM AP[1]: 0x001C0000, JTAG-AP</P><P></P><P>****** Error: Secured Kinetis device detected but mass erase is disabled.</P><P>No APB-AP found.</P><P>No devices found on JTAG chain. Trying to find device on SWD.</P><P>Info: Found SWD-DP with ID 0x2BA01477</P><P></P><P>****** Error: Secured Kinetis device detected but mass erase is disabled.</P><P>Info: Found SWD-DP with ID 0x2BA01477</P><P></P><P>****** Error: Secured Kinetis device detected but mass erase is disabled.</P><P>No device found on SWD.</P><P>Did not find any core.</P><P>Info: TotalIRLen = 4, IRPrint = 0x01</P><P>Info: ARM AP[0]: 0x24770011, AHB-AP</P><P>Info: ARM AP[1]: 0x001C0000, JTAG-AP</P><P></P><P>****** Error: Secured Kinetis device detected but mass erase is disabled.</P><P>No APB-AP found.</P><P>No devices found on JTAG chain. Trying to find device on SWD.</P><P>Info: Found SWD-DP with ID 0x2BA01477</P><P></P><P>****** Error: Secured Kinetis device detected but mass erase is disabled.</P><P>Info: Found SWD-DP with ID 0x2BA01477</P><P></P><P>****** Error: Secured Kinetis device detected but mass erase is disabled.</P><P>No device found on SWD.</P><P>Did not find any core.</P><P>J-Link></P><P></P><P>*******************************************************************************************</P><P>When I try to unlock the board (unlock kinetis), following message is displayed</P><P>*******************************************************************************************</P><P>J-Link>unlock kinetis</P><P>Found SWD-DP with ID 0x2BA01477</P><P>Unlocking device...Unlock via debug port is disabled. Unlock failed.</P><P>Timeout while unlocking device.</P><P>J-Link></P><P></P><P>**********************************</P><P>Unsecure Command of JLINK</P><P>**********************************</P><P>I have also tried to check unsecure command but JLINK Commander V4.42b does not support it for K60N512</P><P></P><P>****************************</P><P>CodeBench with JLINK </P><P>****************************</P><P>When connecting K60N512 using CodeBench & JLINK, following error message is displayed. </P><P></P><P>arm-none-eabi-sprite: J-Link error: Secured Kinetis device detected but mass erase is disabled.</P><P>No APB-AP found.</P><P>arm-none-eabi-sprite: error: Couldn't find a J-Link device</P><P>arm-none-eabi-sprite: waiting for GDB connection, to pass error along</P><P></P><P>**********************</P><P>Using CodeWarrior</P><P>**********************</P><P></P><P>When trying to connect the K60N512 board using CodeWarrior and OSBDM/OSJTAG, </P><P>a pop up message is displayed (twice) saying </P><P></P><P>"Device is secure, Mass erase is </P><P>disabled. Try to unsecure </P><P>anyways?"</P><P></P><P>If I say yes, then another popup message is displayed saying </P><P></P><P>"An error occurred while connecting to the interface hardware or target specified in launch configuration dialog. ......"</P><P></P><P>I also tried by enabling the following option </P><P></P><P>"Always Mass Erase on Connect"</P><P></P><P>but no success. </P><P></P><P></P><P>*****************</P><P>Is there any solution (Hardware/Software) to </P><P>- Unsecure the device </P><P>- Mass erase should be enabled.</P><P></P><P><SPAN class="mce_paste_marker"><BR /></SPAN></P></BODY></HTML> Mon, 17 Sep 2012 13:48:14 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/Secured-Mass-Erase-Disabled-Kinetis-K60N512-Device/m-p/194334#M2412 muhammad_qasim 2012-09-17T13:48:14Z Re: Secured & Mass Erase Disabled Kinetis K60N512 Device https://community.nxp.com/t5/Kinetis-Microcontrollers/Secured-Mass-Erase-Disabled-Kinetis-K60N512-Device/m-p/194335#M2413 <HTML><HEAD></HEAD><BODY><P>Hi,</P><P></P><P>Try the following:</P><P></P><P><SPAN style="font-family: 'Times New Roman','serif'; color: #1f497d;">1.       drop the erase_all_pin.jlk in the “Program Files\IAR Systems\Embedded Workbench 6.0\arm\bin” directory</SPAN></P><P><SPAN style="font-family: 'Times New Roman','serif'; color: #1f497d;">2.       Power off the board</SPAN></P><P><SPAN style="font-family: 'Times New Roman','serif'; color: #1f497d;">3.       Assert the reset pin and hold it asserted for the remainder of the process.</SPAN></P><P><SPAN style="font-family: 'Times New Roman','serif'; color: #1f497d;">4.       Power on the board</SPAN></P><P><SPAN style="font-family: 'Times New Roman','serif'; color: #1f497d;">5.        go to a command window navigate to the “Program Files\IAR Systems\Embedded Workbench 6.0 Evaluation\arm\bin” directory and execute the script by typing “jlink.exe erase_all_pin.jlk” .</SPAN></P><P><SPAN style="font-family: 'Times New Roman','serif'; color: #1f497d;">6.       Release the reset pin</SPAN></P><P><SPAN style="font-family: 'Times New Roman','serif'; color: #1f497d;">7.       Try to connect with debugger</SPAN></P><P></P><P>Best Regards,</P><P></P><P>Luis</P></BODY></HTML> Mon, 17 Sep 2012 14:01:50 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/Secured-Mass-Erase-Disabled-Kinetis-K60N512-Device/m-p/194335#M2413 LuisCasado 2012-09-17T14:01:50Z Re: Secured & Mass Erase Disabled Kinetis K60N512 Device https://community.nxp.com/t5/Kinetis-Microcontrollers/Secured-Mass-Erase-Disabled-Kinetis-K60N512-Device/m-p/194336#M2414 <HTML><HEAD></HEAD><BODY><P>Thanks for your prompt answer. I tried the solution but no success. Same response as described above. </P></BODY></HTML> Mon, 17 Sep 2012 14:38:52 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/Secured-Mass-Erase-Disabled-Kinetis-K60N512-Device/m-p/194336#M2414 muhammad_qasim 2012-09-17T14:38:52Z Re: Secured & Mass Erase Disabled Kinetis K60N512 Device https://community.nxp.com/t5/Kinetis-Microcontrollers/Secured-Mass-Erase-Disabled-Kinetis-K60N512-Device/m-p/194337#M2415 <HTML><HEAD></HEAD><BODY><P>Hello,</P><P></P><P>Have you trid with JTAG connector instead of using SWD?</P><P></P><P>Best Regards,</P><P></P><P>Luis</P></BODY></HTML> Mon, 17 Sep 2012 14:48:08 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/Secured-Mass-Erase-Disabled-Kinetis-K60N512-Device/m-p/194337#M2415 LuisCasado 2012-09-17T14:48:08Z Re: Secured & Mass Erase Disabled Kinetis K60N512 Device https://community.nxp.com/t5/Kinetis-Microcontrollers/Secured-Mass-Erase-Disabled-Kinetis-K60N512-Device/m-p/194338#M2416 <HTML><HEAD></HEAD><BODY><P>Yes, I tried</P><P></P><P>1. CodeBench with JLINK using JTAG connector</P><P>2. CodeWarrior with OSJTAG</P></BODY></HTML> Mon, 17 Sep 2012 14:55:54 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/Secured-Mass-Erase-Disabled-Kinetis-K60N512-Device/m-p/194338#M2416 muhammad_qasim 2012-09-17T14:55:54Z Re: Secured & Mass Erase Disabled Kinetis K60N512 Device https://community.nxp.com/t5/Kinetis-Microcontrollers/Secured-Mass-Erase-Disabled-Kinetis-K60N512-Device/m-p/194339#M2417 <HTML><HEAD></HEAD><BODY><P>Hello,</P><P></P><P>I have recovered some customer boards with the procedure explained. With the script I attached, JLINK and JLink commander, last time with V4.50I from segger.com  . To mantain the reset in the procedure was the key.</P><P></P><P>Best Regards,</P><P></P><P>Luis</P></BODY></HTML> Mon, 17 Sep 2012 15:00:35 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/Secured-Mass-Erase-Disabled-Kinetis-K60N512-Device/m-p/194339#M2417 LuisCasado 2012-09-17T15:00:35Z Re: Secured & Mass Erase Disabled Kinetis K60N512 Device https://community.nxp.com/t5/Kinetis-Microcontrollers/Secured-Mass-Erase-Disabled-Kinetis-K60N512-Device/m-p/194340#M2418 <HTML><HEAD></HEAD><BODY><P>How I executed the Script?</P><P></P><P>1. Power Off the board</P><P>2. Press the Reset Button [SW3]</P><P>3. Power ON the board</P><P>4. Execute the script [jlink.exe erase_all_pin.jlk]</P><P>5. Release the Reset Button [SW3]</P><P></P><P>Now connect the board</P><P>1. using CodeBench, JLINK with the help of connector</P><P>2. using CodeWarrior, OSJTAG/OSBDM</P><P></P><P>Am I missed some settings/configurations.  </P><P></P><P>Here is the output of script</P><P></P><P>***********************************</P><P>SEGGER J-Link Commander V4.52c ('?' for help)</P><P>Compiled Aug 30 2012 15:29:17</P><P></P><P>Script file read successfully.</P><P>DLL version V4.52c, compiled Aug 30 2012 15:29:00</P><P>Firmware: J-Link ARM V8 compiled Aug  1 2012 13:40:47</P><P>Hardware: V8.00</P><P>S/N: 58006903</P><P>VTarget = 0.000V</P><P>Processing script file...</P><P></P><P>JTAG speed: 1000 kHz</P><P></P><P>Sleep(10)</P><P></P><P></P><P>****** Error: Supply voltage too low (1 Volt is required, Measured: 0.0 Volt).</P><P>Please check target power.</P><P>Reset type UNKNOWN: ???</P><P></P><P>Reset delay: 0 ms</P><P>Reset type UNKNOWN: ???</P><P></P><P>PC: (R15) = 00000000, CPSR = 00000000 (Unknown mode, ARM)</P><P>R0 = 00000000, R1 = 00000000, R2 = 00000000, R3 = 00000000</P><P>R4 = 00000000, R5 = 00000000, R6 = 00000000, R7 = 00000000</P><P>USR: R8 =00000000, R9 =00000000, R10=00000000, R11 =00000000, R12 =00000000</P><P>     R13=00000000, R14=00000000</P><P>FIQ: R8 =00000000, R9 =00000000, R10=00000000, R11 =00000000, R12 =00000000</P><P>     R13=00000000, R14=00000000, SPSR=00000000</P><P>SVC: R13=00000000, R14=00000000, SPSR=00000000</P><P>ABT: R13=00000000, R14=00000000, SPSR=00000000</P><P>IRQ: R13=00000000, R14=00000000, SPSR=00000000</P><P>UND: R13=00000000, R14=00000000, SPSR=00000000</P><P></P><P></P><P>WARNING: RESET (pin 15) high, but should be low. Please check target hardware.</P><P></P><P>Sleep(1000)</P><P></P><P>Selecting SWD as current target interface.</P><P>Setting target interface speed to 1MHz. Use "Speed" to change.</P><P></P><P>Sleep(10)</P><P></P><P>Select SWD by sending SWD switching sequence.</P><P>ERROR: Could not reset error in Ctrl/Stat register.</P><P>Sleep(10)</P><P></P><P>Invalid status (=7) received while writing DP register 2</P><P></P><P>Sleep(10)</P><P></P><P>Invalid status (=7) received while reading AP register 0</P><P></P><P>Sleep(10)</P><P></P><P>Invalid status (=7) received while reading AP register 0</P><P></P><P>Sleep(10)</P><P></P><P>Invalid status (=7) received while reading AP register 1</P><P></P><P>Sleep(10)</P><P></P><P>Invalid status (=7) received while reading AP register 1</P><P></P><P>Sleep(10)</P><P></P><P>Invalid status (=7) received while reading AP register 0</P><P></P><P>Sleep(10)</P><P></P><P>Invalid status (=7) received while reading AP register 0</P><P></P><P>Sleep(10)</P><P></P><P>Invalid status (=7) received while writing AP register 1</P><P></P><P>Sleep(1000)</P><P></P><P>Invalid status (=7) received while reading AP register 0</P><P></P><P>Sleep(10)</P><P></P><P>Invalid status (=7) received while reading AP register 0</P><P></P><P>Sleep(10)</P><P></P><P>Invalid status (=7) received while reading AP register 1</P><P></P><P>Sleep(10)</P><P></P><P>Invalid status (=7) received while reading AP register 1</P><P></P><P>Sleep(100)</P><P></P><P>Invalid status (=7) received while writing DP register 2</P><P></P><P>Sleep(1000)</P><P></P><P></P><P>Selecting JTAG as current target interface.</P><P>Setting target interface speed to 1MHz. Use "Speed" to change.</P><P></P><P>Sleep(100)</P><P></P><P></P><P>****** Error: Supply voltage too low (1 Volt is required, Measured: 0.0 Volt).</P><P>Please check target power.</P><P>Reset delay: 0 ms</P><P>Reset type UNKNOWN: ???</P><P></P><P></P><P>Script processing completed.</P><P>****************************************</P><P><SPAN class="mce_paste_marker"><BR /></SPAN></P></BODY></HTML> Mon, 17 Sep 2012 15:24:36 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/Secured-Mass-Erase-Disabled-Kinetis-K60N512-Device/m-p/194340#M2418 muhammad_qasim 2012-09-17T15:24:36Z Re: Secured & Mass Erase Disabled Kinetis K60N512 Device https://community.nxp.com/t5/Kinetis-Microcontrollers/Secured-Mass-Erase-Disabled-Kinetis-K60N512-Device/m-p/194341#M2419 <HTML><HEAD></HEAD><BODY><P>Hello,</P><P></P><P>Try to power the board from TWR-ELV USB connector.  Did you receive a pop up window from commander about that you device is secured and if you want a mass erase?</P><P><BR />Best Regards,</P><P></P><P>Luis</P></BODY></HTML> Mon, 17 Sep 2012 15:35:31 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/Secured-Mass-Erase-Disabled-Kinetis-K60N512-Device/m-p/194341#M2419 LuisCasado 2012-09-17T15:35:31Z Re: Secured & Mass Erase Disabled Kinetis K60N512 Device https://community.nxp.com/t5/Kinetis-Microcontrollers/Secured-Mass-Erase-Disabled-Kinetis-K60N512-Device/m-p/194342#M2420 <HTML><HEAD></HEAD><BODY><P>"Try to power the board from TWR-ELV USB connector"</P><P></P><P>Yes</P><P></P><P>"Did you receive a pop up window from commander about that you device is secured and if you want a mass erase?"</P><P></P><P>1. When I use CodeBench + JLINK, no pop up window is displayed. </P><P>2. When I use CodeWarrior + OSJTAG, Pop up window is displayed by stating a message</P><P></P><P>"Device is secure, Mass erase is disabled. Try to unsecure anyways?"</P><P></P><P>If I say yes, then another popup message is displayed saying </P><P></P><P>"An error occurred while connecting to the interface hardware or target specified in launch configuration dialog. ......"</P><P></P><P>After retrying, downloading is failed. </P><P><SPAN class="mce_paste_marker"><BR /></SPAN></P></BODY></HTML> Tue, 18 Sep 2012 12:22:31 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/Secured-Mass-Erase-Disabled-Kinetis-K60N512-Device/m-p/194342#M2420 muhammad_qasim 2012-09-18T12:22:31Z Re: Secured & Mass Erase Disabled Kinetis K60N512 Device https://community.nxp.com/t5/Kinetis-Microcontrollers/Secured-Mass-Erase-Disabled-Kinetis-K60N512-Device/m-p/194343#M2421 <HTML><HEAD></HEAD><BODY><P>Hello,</P><P></P><P>Using the Segger software and the script, you should receive a pop-up screen about that Device is secured. Did you get it? Don't forget that you can block forever the device if you wrote in the config registers a bad value. With segger software and script I have recovered all the devices that were not fully locked.</P><P></P><P><A href="http://www.segger.com/jlink-software.html">http://www.segger.com/jlink-software.html</A></P><P></P><P></P><P>Best Regards,</P><P><BR /> </P></BODY></HTML> Tue, 18 Sep 2012 14:28:40 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/Secured-Mass-Erase-Disabled-Kinetis-K60N512-Device/m-p/194343#M2421 LuisCasado 2012-09-18T14:28:40Z Re: Secured & Mass Erase Disabled Kinetis K60N512 Device https://community.nxp.com/t5/Kinetis-Microcontrollers/Secured-Mass-Erase-Disabled-Kinetis-K60N512-Device/m-p/194344#M2422 <HTML><HEAD></HEAD><BODY><P>Thanks for your valuable suggestions. I think the board has been locked & secured permanently and can not be programed now. It is also verified by Board Vendor.</P></BODY></HTML> Wed, 19 Sep 2012 14:39:23 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/Secured-Mass-Erase-Disabled-Kinetis-K60N512-Device/m-p/194344#M2422 muhammad_qasim 2012-09-19T14:39:23Z Re: Secured & Mass Erase Disabled Kinetis K60N512 Device https://community.nxp.com/t5/Kinetis-Microcontrollers/Secured-Mass-Erase-Disabled-Kinetis-K60N512-Device/m-p/194345#M2423 <HTML><HEAD></HEAD><BODY><P>Hello,</P><P></P><P>I solved with command "Jlink unlock Kinetis"  from ...<SPAN style="font-family: 'Times New Roman','serif'; color: #1f497d;">\IAR Systems\Embedded Workbench 6.5\arm\bin</SPAN></P><P><SPAN style="font-family: 'Times New Roman','serif'; color: #1f497d;"><BR /></SPAN></P><P><SPAN style="font-family: 'Times New Roman','serif'; color: #1f497d;">Antonio</SPAN></P></BODY></HTML> Fri, 15 Feb 2013 10:25:00 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/Secured-Mass-Erase-Disabled-Kinetis-K60N512-Device/m-p/194345#M2423 antonio66 2013-02-15T10:25:00Z