Kinetis MicrocontrollersのトピックRe: MKL LOW POWER WITH TSI.

MKL LOW POWER WITH TSI.

eliezeroc — Mon, 22 Jun 2015 17:17:26 GMT

Hello. I'm developing a project with MKL05. This project should be powered with four AA batteries and almentar the useful life of the battery I have to put the PC to sleep (low power) and waking through TSI. Can anyone help me. I got an example of the KL25 that does the same, but when the system calls the function "GotoLowPower ()", the micro sleeps and does not wake up more. It is caught in the "DO WHILE".

Thank you.

Re: MKL LOW POWER WITH TSI.

Paul_Tian — Fri, 26 Jun 2015 06:07:10 GMT

Hi, Eliezer

Please send your project which has issues, I will check it for you.

Best Regards

Paul

Re: MKL LOW POWER WITH TSI.

eliezeroc — Fri, 26 Jun 2015 17:48:45 GMT

Hello Paul, follows the code I am using as an example. From it I will develop my application.

I will be very grateful if you can help me.

If you are not able to download the file let me know that I command again.

Thank you.

Frdmkl05_tss_3_1_CW10_6.rar - Google Drive

Re: MKL LOW POWER WITH TSI.

eliezeroc — Mon, 29 Jun 2015 10:52:21 GMT

Hello Paul, follows the code I am using as an example. From it I will develop my application.

I will be very grateful if you can help me.

If you are not able to download the file let me know that I command again.

Thank you.

Frdmkl05_tss_3_1_CW10_6.rar - Google Drive

Re: MKL LOW POWER WITH TSI.

vicentegomez — Mon, 29 Jun 2015 15:56:45 GMT

Hi Eliezer

The KL05 has an errata about the TSI and the LPTMR, please check it ERRATA 6060 TSI: Out of Range interrupt shows incorrect behavior with some configurations on the following link:

Errata for Mask 2N96F

Because of this is better use the LPTMR to wake up the MCU check if there is any touch and then go to stop again, please check the attached project, this is for the freedom kl05 and use one electrode, if the electrode is not touch for some time the MCU goes to LLS and is waking up periodically to check if there is a touch or not,.

I hope this will help you.

Regards

Vicente

Re: MKL LOW POWER WITH TSI.

eliezeroc — Mon, 29 Jun 2015 16:38:04 GMT

Hello Vincent, how do I download the attachment.

Thanks.

Re: MKL LOW POWER WITH TSI.

vicentegomez — Tue, 30 Jun 2015 14:38:27 GMT

Hi Eliezer

You only need to long in and click on it

Regards

Vicente