TWR-K60N512 MQX Web eample IAR project not compiling

tkotze — Thu, 24 Mar 2011 23:22:34 GMT

Hi there, I am new to IAR, Freescale and MQX, but that should not be a problem, since Freescale provided me with enough sample proects to get going. However, I am trying to compile the MQX web project form the quick start demo, and it keeps telling me that there are problems with the project.

When I click on the eww project file, IAR starts but gives me an error saying that "Broken options were detected in the project file". When I click on OK, it tells me that an unknown tool has been found, "PEMICRO_ID", then tessl me and invalid driver option exists, invalid processor option exists, "no kernel to load" and that an "error occured while trying to initialize debugger".

I looked at the basics, selected a processor in the options, checked to see if MQX was installed (it is). I am at a lost here and would prreciate any help.

Thanx

Re: TWR-K60N512 MQX Web eample IAR project not compiling

Jaux — Sun, 27 Mar 2011 04:50:05 GMT

MQX and CodeWarrior is not supported on the K60 - you have to use the IAR IDE.

Kinetis MicrocontrollersのトピックTWR-K60N512 MQX Web eample IAR project not compiling

TWR-K60N512 MQX Web eample IAR project not compiling

Re: TWR-K60N512 MQX Web eample IAR project not compiling