Reloading K64f

mark_bresler — Tue, 01 Sep 2015 13:54:03 GMT

Hi, I seem to have an older version of the K64f board that was packaged without a usb cable in a brown slip box. It does not run a demo program out of the box. I remember seeing a webpage on how to reload the demo programs and how to switch between them, but cannot find it now. Any help will be appreciated.

Thanks,

Mark

Re: Reloading K64f

Carlos_Mendoza — Thu, 03 Sep 2015 22:16:40 GMT

Hi Mark,

You can find the out of the box demo binary on the FRDM-K64F Quick Start Package:

The QSP can be downloaded from this link:

http://cache.freescale.com/files/32bit/software/board_support_packages/FRDM-K64F_QSP.zip

The FRDM-K64F should come with the mass-storage device (MSD) Flash Programmer OpenSDAV2 Application preinstalled so you only need to drag and drop the out of the box demo binary file to the MBED drive:

For instructions on how to run the Out of Box Demo please follow the steps on the page 5 from the "Quick Start Guide for the Freescale Freedom Development Platform" document also found on the QSP.

Hope it helps!

Best Regards,

Carlos Mendoza

Technical Support Engineer

-----------------------------------------------------------------------------------------------------------------------

Note: If this post answers your question, please click the Correct Answer button. Thank you!

-----------------------------------------------------------------------------------------------------------------------

Kinetis Microcontrollers中的主题 Re: Reloading K64f

Reloading K64f

Re: Reloading K64f