topic Requesting for Project in Kinetis Microcontrollers

Requesting for Project

narreddisivapra — Mon, 28 Sep 2015 05:47:08 GMT

Hi.., Recently I shifted to Kinaties and I'm new to this controllers. will you please guide me how to start project using KDS II and also link some demos.

Thanking you.,

Prakash Reddy. Narreddy

subbu3881@gmail.com

Re: Requesting for Project

kerryzhou — Tue, 29 Sep 2015 08:42:41 GMT

Hi Prakash Reddy. Narreddy

The newest version of KDS is KDS3.0, I suggest you use KDS3.0, it already fix a lot of the bug in KDS2.0, you can download KDS3.0 from this link:

www.freescale.com/kds

After you install the KDS3.0, you can refer to the KDS_Users_Guide.pdf which you can find from this path:C:\Freescale\KDS_3.0.0\doc

This document is the get start document.

Wish it helps you!

If you still have question, please contact with me!

Have a great day,
Jingjing

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: Requesting for Project

narreddisivapra — Tue, 29 Sep 2015 09:17:30 GMT

Thank you sir for your Suggestion

Re: Requesting for Project

vijenad — Thu, 01 Oct 2015 07:02:46 GMT

Hi Reddy,

If you want any particular example code to start with, then let us know - we can help it

Re: Requesting for Project

narreddisivapra — Thu, 01 Oct 2015 07:08:25 GMT

Yeah sir, I'm searching for examples but i didn't caught any examples. so , please send me some examples and thank you for support.

Regards.,

Siva Prakash Reddy Narreddy

Re: Requesting for Project

vijenad — Thu, 01 Oct 2015 08:15:15 GMT

Hello Reddy,

Initially I started with KDS, due to some issues I shifted to code warrior, however the code remains same.

This is the example to blink the LED by using embedded components, hope it will help you

1. I am using two embedded components

Configuration for BitIO is (I am using TRK-KEA 128 evaluation board)

configuration for TimerInt is

dobule click on event.c

Expand BitIO

pull NegVal into event.c

Generate processor expert code

Build it

Dump the code using debug mode onto your evaluation board

Run it

LED should start blinking

If it doesn't, post your query by specifying the problem