Kinetis MicrocontrollersのトピックRe: Broken USB port on FRDM-KL25Z https://community.nxp.com/t5/Kinetis-Microcontrollers/Broken-USB-port-on-FRDM-KL25Z/m-p/410459#M23153 <HTML><HEAD></HEAD><BODY><P>I found a schematic for the board and delicately soldered the +5, gnd, D+, and D- wires to the board - working again!</P></BODY></HTML> Thu, 07 May 2015 17:55:04 GMT robblanchard 2015-05-07T17:55:04Z Broken USB port on FRDM-KL25Z https://community.nxp.com/t5/Kinetis-Microcontrollers/Broken-USB-port-on-FRDM-KL25Z/m-p/410458#M23152 <HTML><HEAD></HEAD><BODY><P>The USB port has broken off my board - is there anyway to wire in a USB cable to the board? Looks like there's a header for the SDA port, but not the USB.</P></BODY></HTML> Thu, 07 May 2015 16:28:30 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/Broken-USB-port-on-FRDM-KL25Z/m-p/410458#M23152 robblanchard 2015-05-07T16:28:30Z Re: Broken USB port on FRDM-KL25Z https://community.nxp.com/t5/Kinetis-Microcontrollers/Broken-USB-port-on-FRDM-KL25Z/m-p/410459#M23153 <HTML><HEAD></HEAD><BODY><P>I found a schematic for the board and delicately soldered the +5, gnd, D+, and D- wires to the board - working again!</P></BODY></HTML> Thu, 07 May 2015 17:55:04 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/Broken-USB-port-on-FRDM-KL25Z/m-p/410459#M23153 robblanchard 2015-05-07T17:55:04Z