topic Re: kinetis dising IDE for family M in Kinetis Microcontrollers

kinetis dising IDE for family M

andresbaena — Wed, 06 May 2015 14:07:41 GMT

hello

kinetis IDE not suport kinetis series M

thanks

Re: kinetis dising IDE for family M

ivadorazinova — Wed, 06 May 2015 14:23:44 GMT

Hello andreas,

No. Kinetis M series are not supported in KDS because are not supported by KSDK.

So KDS and KSDK are released together and KDS supports just devices that are currently supported by KSDK.

Best Regards,

Iva

Re: kinetis dising IDE for family M

andresbaena — Wed, 06 May 2015 14:38:45 GMT

hello Iva

then not have proccess expert for kinetis M, either CW10.6 or kinetis dising IDE

thanks

andres

Re: kinetis dising IDE for family M

ivadorazinova — Wed, 06 May 2015 14:55:29 GMT

Hi andres baena,

do you need work with PE or not?

What are you using for MCU?

Best Regards,

Iva

Re: kinetis dising IDE for family M

andresbaena — Wed, 06 May 2015 15:12:14 GMT

hi iva

i am using the MCU MKM33Z64ACLH5,

i do not understand,if work with PE or not

thanks

andres

Re: kinetis dising IDE for family M

ivadorazinova — Thu, 07 May 2015 08:17:39 GMT

Hi andres baena,

list of supported devices you find at your current version of CW C:\Freescale\CW MCU v10.6\MCU\ProcessorExpert in file README.txt

If I look at README.txt for 10.6.3 version, I don´t see support for KMx family.

You can check it in the newest version CW,

New CodeWarrior for MCU v10.6.4 available

I hope this helps,

Have a nice day,

Iva

Re: kinetis dising IDE for family M

markrietz — Fri, 05 Jun 2015 08:09:48 GMT

Hi Iva Dorazinova,

I wonder if Freescale is going to add the KMx family to the PE and if .... when???

I really want to be sure before I start building my own HAL that will occupy me quite a time...

PE is an great USP for the Freescale micros!

Thanks in advance for your comment

Mark

Re: kinetis dising IDE for family M

ivadorazinova — Mon, 08 Jun 2015 07:10:19 GMT

Hello Mark,

actually coming soon TWR-KM34Z75M for KM family as Standalone version (unfortunately no support for MKM33Z64ACLH5),

after Eclipse Update you will see in KDS IDE:

but either for this case unfortunately is no PEx support.

Sorry for any inconvenience this may cause.

Best Regards,

Iva

Re: kinetis dising IDE for family M

andresbaena — Wed, 16 Sep 2015 15:35:51 GMT

hello

i am don't understand why this place, if it is not supported

Re: kinetis dising IDE for family M

BlackNight — Wed, 16 Sep 2015 18:50:29 GMT

There will be an update coming out these days supporting KM14, KM33 and KM34 with bare metal projects.

I'll post here a note once it is available for download.

Erich

Re: kinetis dising IDE for family M

andresbaena — Wed, 16 Sep 2015 19:34:14 GMT

hi Eric

i need to know, the data to download it.

thanks

Re: kinetis dising IDE for family M

BlackNight — Thu, 17 Sep 2015 20:16:58 GMT

Hi Andres,

see Support for Kinetis M (KM14, KM33, KM34) in Kinetis Design Studio

I hope this helps,

Erich

Re: kinetis dising IDE for family M

andresbaena — Thu, 17 Sep 2015 20:48:09 GMT

hi Erich

thank for you help.