topic How can I know the vector table address on my project? in Kinetis Microcontrollers https://community.nxp.com/t5/Kinetis-Microcontrollers/How-can-I-know-the-vector-table-address-on-my-project/m-p/392180#M21383 <HTML><HEAD></HEAD><BODY><P>For add the fnet stack tcp/ip on my proect I need to know the address of vector table address on my proect. Where can I see it? I never change it, so I think that was 0x00 but I have an error.</P><P></P><P>Best regard,</P><P>Alessio</P></BODY></HTML> Thu, 09 Apr 2015 06:58:23 GMT alessiopaolucci 2015-04-09T06:58:23Z How can I know the vector table address on my project? https://community.nxp.com/t5/Kinetis-Microcontrollers/How-can-I-know-the-vector-table-address-on-my-project/m-p/392180#M21383 <HTML><HEAD></HEAD><BODY><P>For add the fnet stack tcp/ip on my proect I need to know the address of vector table address on my proect. Where can I see it? I never change it, so I think that was 0x00 but I have an error.</P><P></P><P>Best regard,</P><P>Alessio</P></BODY></HTML> Thu, 09 Apr 2015 06:58:23 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/How-can-I-know-the-vector-table-address-on-my-project/m-p/392180#M21383 alessiopaolucci 2015-04-09T06:58:23Z Re: How can I know the vector table address on my project? https://community.nxp.com/t5/Kinetis-Microcontrollers/How-can-I-know-the-vector-table-address-on-my-project/m-p/392181#M21384 <HTML><HEAD></HEAD><BODY><P>Hi, Alessio,</P><P></P><P>Regarding the vector table address, you can use debugger to check the core VTOR register, it's location is 0xE000ED08.</P><P>If you use CodeWarrior for mcu ver10.6, you can check the register in debugger of CW.</P><P>Registers-&gt;System Control Registers-&gt;SCB_VTOR.</P><P>Hope it can help you</P><P>BR</P><P>XiangJun Rong</P></BODY></HTML> Thu, 09 Apr 2015 09:45:50 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/How-can-I-know-the-vector-table-address-on-my-project/m-p/392181#M21384 xiangjun_rong 2015-04-09T09:45:50Z