Kinetis MicrocontrollersのトピックRe: Re: FSL_Kinetis_bootloader with KDS or Codewarrior IDE

FSL_Kinetis_bootloader with KDS or Codewarrior IDE

kwanghoPARK — Wed, 07 Jan 2015 08:49:26 GMT

I need the KBOOT example that can be used in the KDS or Codewarrior IDE.

Anyone knows How to use the FSL_Kinetis_Bootloader_1_1_0 with KDS IDE.

My target board is TWR-KL25Z48M.

Re: FSL_Kinetis_bootloader with KDS or Codewarrior IDE

ivadorazinova — Wed, 07 Jan 2015 11:55:18 GMT

Hi KWANGHO PARK,

KBOOT has not been supported by KDS yet.

KBOOT will only support IAR. We are planning to include KDS in the future.

Best Regards,

Iva

Re: FSL_Kinetis_bootloader with KDS or Codewarrior IDE

mjbcswitzerland — Wed, 07 Jan 2015 14:22:43 GMT

Note that KBOOT V1.1.0 UART and USB modes are available in the uTasker serial loader (together with composite USB-MSD, and/or combined SD card etc.) which can be built with CW, KDS, IAR, uVision, CooCox, Crossworks, Atollic, GCC (and with Green Hills in the developer version): µTasker Kinetis support

The TWR-KL25Z48M is supported out-of-the-box - I will post a binary later today so that it can be evaluated if required before Feescale's solution is made available.

The majority of Freescale KE, KL and K boards are supported and need no further porting effort but can be easily customised/built with any of these compilers/tools..

Regards

Mark

Re: FSL_Kinetis_bootloader with KDS or Codewarrior IDE

mjbcswitzerland — Wed, 07 Jan 2015 19:26:02 GMT

This is the link that I wanted to give earlier:

http://www.utasker.com/kinetis/TWR-KL25Z48M.html

Here you can test KBOOT operation on UART and USB on the TWR-KL25Z48M - at the same time is allows USB-MSD operation on its composite USB device connection.

To verify loading there is an application for the board with various functions (including):

- displays accelerometer values
- allows low power modes
- operates as composite USB-device with USB-CDC, mouse and keyboard (the command line menu is available of the virtual COM or on UART-0)

At the moment the KBOOT PC SW has a problem with USB mode and takes about 3 minutes to load the application. Using KBOOT UART is a lot faster and using USB-MSD is very fast.

Regards

Mark

http://www.utasker.com/kinetis.html

Re: FSL_Kinetis_bootloader with KDS or Codewarrior IDE

kwanghoPARK — Wed, 07 Jan 2015 23:10:01 GMT

Hello Iva,

Many thanks for your information.

Could you please let me know the month or quarter of you mentioned "in the Future".

Best Regards.

Park.

Re: Re: FSL_Kinetis_bootloader with KDS or Codewarrior IDE

ivadorazinova — Thu, 08 Jan 2015 11:25:18 GMT

Hi KWANGHO PARK,

I sent email to product manager for exact information about the term. When I receive the information, I will write you.

You are welcome.

Have a nice day,

Iva

Re: FSL_Kinetis_bootloader with KDS or Codewarrior IDE

a8Chcx — Tue, 03 Feb 2015 20:11:51 GMT

Hi Iva,

I am looking for Kinetis Bootloader for my K64 using KDS IDE... I want CANBUS interface is added.

Could you let me know when it will be available, hopefully in Q2, 2015?

Thanks,

Christie

Re: Re: FSL_Kinetis_bootloader with KDS or Codewarrior IDE

ivadorazinova — Wed, 04 Feb 2015 16:14:00 GMT

Dear Christie, CAN interface will be available on KV4x, which is planned in KBOOT 1.2. release in June, 2015. Best Regards, Iva

Re: Re: FSL_Kinetis_bootloader with KDS or Codewarrior IDE

ivadorazinova — Wed, 04 Feb 2015 16:18:49 GMT

Hi KWANGHO PARK,

You can look forward to new KBOOT 1.2 version planned for June,2015.

There would be KDS support.

Best Regards,

Iva

Re: FSL_Kinetis_bootloader with KDS or Codewarrior IDE

a8Chcx — Wed, 04 Feb 2015 19:45:11 GMT

Hi Iva,

This will be using KDS? And it is easy to modify to use on K64F?

Thanks,

Christie

Re: Re: FSL_Kinetis_bootloader with KDS or Codewarrior IDE

ivadorazinova — Thu, 05 Feb 2015 21:20:23 GMT

Hi Christie,

yes. Here will be support for KDS and IAR.

Yes, it would be possible to port to FRDM-K64F.

Best Regards,

Iva

Re: FSL_Kinetis_bootloader with KDS or Codewarrior IDE

a8Chcx — Mon, 13 Jul 2015 14:59:11 GMT

Hi Iva,

Any update on this bootloader?

Thanks,

Christie

Re: FSL_Kinetis_bootloader with KDS or Codewarrior IDE

a8Chcx — Mon, 13 Jul 2015 20:37:33 GMT

Hi Iva,

Any update on this boot-loader?

Thanks,

Christie

Re: FSL_Kinetis_bootloader with KDS or Codewarrior IDE

ivadorazinova — Thu, 16 Jul 2015 05:04:17 GMT

Hello Christie,

many thanks for your interest and for remainder.

The KBOOT 1.2 is now prepared and during the next week will be available.

Have a great day!

Iva