topic Re: How to flash TRK-KEA128 in Kinetis Microcontrollers

How to flash TRK-KEA128

saya — Mon, 26 Jan 2015 14:22:00 GMT

Hi, everyone,

I just got a TRK-KEA128 board and trying to get start with it, but I am not sure how to flash the board, I am using CW10.6 and trying to learn from the TRK-KEA128 labs examples they provide on there web.

Any help is appreciated.

Re: How to flash TRK-KEA128

david_diaz — Mon, 26 Jan 2015 22:12:53 GMT

Hello Alan,

In this case, I recommend the TRK-KEA Quick Start Guide, in order to get familiar with the device.

You will find an introduction and default settings about TRK-KEA in the following link:

http://www.freescale.com/files/soft_dev_tools/doc/user_guide/KINTESMCUAUTQSG.pdf

As is showed in the document mentioned, the device counts with OpenSDA USB Port in order to program the board.

Please find more information about the OpenSDA USB Port and CodeWarrior Quick Start Guide in the following links:

OpenSDA USB Port

http://www.freescale.com/files/32bit/doc/user_guide/OPENSDAUG.pdf

CodeWarrior Quick Start Guide

http://www.freescale.com/files/soft_dev_tools/doc/quick_ref_guide/MCU_QS.pdf

Besides that, I recommend the Kinetis Peripheral Module Quick Reference in order to know more about the labs examples provided.

This collection of code examples, useful tips, and quick reference material has been created to help you speed the development of your applications.

Please find the document mentioned in the following link:

http://www.freescale.com/files/32bit/doc/quick_ref_guide/KQRUG.pdf

Hope this information will be useful for you.

Best Regards,

David Diaz.

-----------------------------------------------------------------------------------------------------------------------

Note: If this post answers your question, please click the Correct Answer button. Thank you!

-----------------------------------------------------------------------------------------------------------------------

Re: How to flash TRK-KEA128

saya — Tue, 27 Jan 2015 13:14:08 GMT

I found out that I didn't patch the KEA-CW package yesterday and thus my device is not shown when flashing.

Kinetis Peripheral Module Quick Reference is a big help. Thanks David.:smileyhappy:

Re: How to flash TRK-KEA128

carloshass — Fri, 26 Jun 2015 19:13:02 GMT

David,

I downloaded the latest examples from http://cache.freescale.com/files/microcontrollers/software/device_drivers/FSL_LIN_2.X_DRIVER.zip?fasp=1&WT_TYPE=Device%2… .

I can use Kinetis Design Studio or only Code Warrior ?

Because inside zip, on folder Examples\Kinetis, is not a kinetis project?

Re: How to flash TRK-KEA128

david_diaz — Fri, 26 Jun 2015 20:13:35 GMT

Hello Carlos,

The examples contained on the following path, are supported by CodeWarrior.

FSL LIN 2.x Stack Package 4.5.4\Examples\Kinetis\KEA128

Best Regards,

David

Re: How to flash TRK-KEA128

rachansingh — Wed, 16 Mar 2016 14:45:41 GMT

H I am planning to buy Kinetis KEA128 StarterTRAK Dev board to do learn some LIN development. This comes with code warrior I just want to know the how long I can use the code warrior evaluation license for.

Re: How to flash TRK-KEA128

rachansingh — Wed, 23 Mar 2016 14:59:43 GMT

Hi just got the TRK-KEA 128 dev board. Opened processor expert kinetis project

still ai mable to SS

still I was able to build this project and create an elf

in my debug settings my connection type is undefined

I also did the following as per the sda document. dragged the . SDA

Re: How to flash TRK-KEA128

rachansingh — Wed, 23 Mar 2016 15:21:03 GMT

Also when i create a new bare board project, i don't see a choice for KEA128 under devices.

but going through the following

and connector type is nor undefined as follows

sorry for so many questions i am just new at this