topic Re: actualizacion de bootloader in Kinetis Microcontrollers

actualizacion de bootloader

albertoflores — Tue, 10 Mar 2015 07:00:53 GMT

hola estoy usando windos 8.1 y me e fijado que hay una falla con el bootoader de la frdm-kl25z busque la actualización y ahora la computadora la reconoce como MBED esto es correcto o es otro archivo

Re: actualizacion de bootloader

jiunnyang — Wed, 11 Mar 2015 08:22:21 GMT

Hi,

I thinks you need to change your FRDM0KL25Z board to OpenSDA-debuger mode.

Please refer the below link to download OpenSDA,

http://www.pemicro.com/opensda/

And how to change to debuger mode, you can refer the Getting into Bootloader Mode in the User's Guide, then Drag/drop or copy/paste MSD-DEBUG-TRK-KEA64_Pemicro_v116.SDA the desired application to the BOOTLOADER drive.

http://www.freescale.com/files/32bit/doc/user_guide/OPENSDAUG.pdf

Re: actualizacion de bootloader

albertoflores — Thu, 12 Mar 2015 00:29:38 GMT

hola gracias por la info pero ese no es el problema que tengo lo que pasa es que la computadora no reconoce la tarjeta de ninguna forma y en otra pc si lo hace

gracias

Date: Wed, 11 Mar 2015 01:22:40 -0700

From: admin@community.freescale.com

To: beto_fgca@hotmail.com

Subject: Re: - actualizacion de bootloader

actualizacion de bootloader

reply from Jiunn-Jye Yang in Kinetis UART Command Line Bootloader - View the full discussion

Hi,

I thinks you need to change your FRDM0KL25Z board to OpenSDA-debuger mode.

Please refer the below link to download OpenSDA,

http://www.pemicro.com/opensda/

http://www.freescale.com/files/32bit/doc/user_guide/OPENSDAUG.pdf

Did your question get answered?

If so, say thanks by clicking Correct Answer in the community thread!

Reply to this message by replying to this email, or go to the message on Freescale Community

Start a new discussion in Kinetis UART Command Line Bootloader by email or at Freescale Community

Following actualizacion de bootloader in these streams:

Inbox