Kinetis Microcontrollers中的主题 Re: Programmer recommended for kinetis k64

Programmer recommended for kinetis k64

kcg — Wed, 29 Oct 2014 12:22:03 GMT

Hello

I would like to programer through JTAG MCU of kinetis k64, specifically a MK64FN1M0M12. I have been looking programmers of j-link or PE-Micro (USB Multilink Universal,J-link BASE...).

What is programmer the best of MCU kinetis k64?

thanks

Re: Programmer recommended for kinetis k64

antonioconcio — Wed, 29 Oct 2014 13:41:34 GMT

Hi Kevin,

The kinetis K series such as K64 supports both JTAG and SWD debug interfaces.

Having said that, both P&E Multilinks and Segger J-Link working great, as well as I-jet if you are using IAR; I'd say to go on with what you have already, if any.

Personally I am fine with J-Link but as mentioned also Universal Multilink is really OK.

I don't know what IDE you are using, in case it is KDS let me add that KDS supports obviously P&E Multilinks (including P&E OpenSDAv1), Segger J-Link (OpenSDAv1 and OpenSDAv2) and OpenOCD with CMSIS-DAP (both OpenSDAv1 and OpenSDAv2).

You can see HERE how to setup debug configurations with recommended settings.

Hope that helps,

Antonio

Re: Programmer recommended for kinetis k64

kcg — Thu, 30 Oct 2014 08:24:41 GMT

Thank you Antonio

your comments have been a great help

Re: Programmer recommended for kinetis k64

kcg — Thu, 30 Oct 2014 11:24:03 GMT

Hello Antonio

Sorry to bother you again. Is there any option of low cost programmer with free software? not be necessary I could debug.

thanks

Re: Re: Programmer recommended for kinetis k64

antonioconcio — Thu, 30 Oct 2014 15:36:08 GMT

Hello Kelvin,

Please have a look at the following hyperlinks:

Freedom Board with Segger OpenSDA Debug Firmware and KDS settings HERE.

Hope that helps,

Antonio

Re: Programmer recommended for kinetis k64

kcg — Fri, 31 Oct 2014 09:00:48 GMT

Hi Antonio

Thanks for your help. Do you know any software free for to program my own hardware through JTAG?

thans Antonio

Re: Programmer recommended for kinetis k64

antonioconcio — Fri, 31 Oct 2014 09:43:42 GMT

Sure Kevin,

KDS is what you are looking for.

Please refer HERE for more details.

Regards,

Antonio

Re: Programmer recommended for kinetis k64

kcg — Fri, 31 Oct 2014 10:59:38 GMT

Hi Antonio

Sorry I have not explained well. I'm looking a software that it's only for programmer, because KDS is heavy.

thanks Antonio

Re: Programmer recommended for kinetis k64

kcg — Fri, 31 Oct 2014 15:21:17 GMT

hello Antonio

I've found this device USBDM Emulator BDM Kinetis ARM Support K60 HCS12 HC08 DSP Coldfire | eBay.

I have seen that this device is compatible with MCU K64 but, do I need special hardware in my device to work with this programer to jtag?

thanks