Kinetis MicrocontrollersのトピックRe: FRDM-KL25Z: No interrupts on ADC? https://community.nxp.com/t5/Kinetis-Microcontrollers/FRDM-KL25Z-No-interrupts-on-ADC/m-p/348378#M17042 <HTML><HEAD></HEAD><BODY><P>Hello Ken:</P><P></P><P>The <STRONG>Interrupt </STRONG>column refers to digital port interrupts and it is not related to ADC or any other modules. If you double check, you can see only PTA and PTD pins support interrupts (see <A _jive_internal="true" href="https://community.nxp.com/thread/336922"><STRONG>this</STRONG></A>).</P><P><BR />Regards!,<BR />Jorge Gonzalez</P><P></P><P>-----------------------------------------------------------------------------------------------------------------------<BR />Note: If this post answers your question, please click the Correct Answer button. Thank you!<BR />-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Fri, 12 Dec 2014 18:47:21 GMT Jorge_Gonzalez 2014-12-12T18:47:21Z FRDM-KL25Z: No interrupts on ADC? https://community.nxp.com/t5/Kinetis-Microcontrollers/FRDM-KL25Z-No-interrupts-on-ADC/m-p/348377#M17041 <HTML><HEAD></HEAD><BODY><P>I noticed that the document "FRDM-KL25Z Pinouts (Rev 1.0)" says that the FRDM-KL25Z does not support interrupts on ADC.&nbsp; Is this a board limitation or a processor limitation?</P></BODY></HTML> Fri, 12 Dec 2014 16:38:19 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/FRDM-KL25Z-No-interrupts-on-ADC/m-p/348377#M17041 KenSnyder 2014-12-12T16:38:19Z Re: FRDM-KL25Z: No interrupts on ADC? https://community.nxp.com/t5/Kinetis-Microcontrollers/FRDM-KL25Z-No-interrupts-on-ADC/m-p/348378#M17042 <HTML><HEAD></HEAD><BODY><P>Hello Ken:</P><P></P><P>The <STRONG>Interrupt </STRONG>column refers to digital port interrupts and it is not related to ADC or any other modules. If you double check, you can see only PTA and PTD pins support interrupts (see <A _jive_internal="true" href="https://community.nxp.com/thread/336922"><STRONG>this</STRONG></A>).</P><P><BR />Regards!,<BR />Jorge Gonzalez</P><P></P><P>-----------------------------------------------------------------------------------------------------------------------<BR />Note: If this post answers your question, please click the Correct Answer button. Thank you!<BR />-----------------------------------------------------------------------------------------------------------------------</P></BODY></HTML> Fri, 12 Dec 2014 18:47:21 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/FRDM-KL25Z-No-interrupts-on-ADC/m-p/348378#M17042 Jorge_Gonzalez 2014-12-12T18:47:21Z