topic How to communicate with I2C device in the project generated by freescale BeeKit in Kinetis Microcontrollers https://community.nxp.com/t5/Kinetis-Microcontrollers/How-to-communicate-with-I2C-device-in-the-project-generated-by/m-p/345380#M16822 <HTML><HEAD></HEAD><BODY><P>I use freescale BeeKit to generate a wireless Uart project.Now I need to communicate with i2c devices(accelerator sensors).And I found some files about i2c under MKW22D\WirelessUART\PLM\Source\IIC. But I don't know what I need to do to read and write data from i2c devices.Could someone help?Thanks. </P></BODY></HTML> Tue, 24 Mar 2015 15:41:21 GMT 吕晨赵 2015-03-24T15:41:21Z How to communicate with I2C device in the project generated by freescale BeeKit https://community.nxp.com/t5/Kinetis-Microcontrollers/How-to-communicate-with-I2C-device-in-the-project-generated-by/m-p/345380#M16822 <HTML><HEAD></HEAD><BODY><P>I use freescale BeeKit to generate a wireless Uart project.Now I need to communicate with i2c devices(accelerator sensors).And I found some files about i2c under MKW22D\WirelessUART\PLM\Source\IIC. But I don't know what I need to do to read and write data from i2c devices.Could someone help?Thanks. </P></BODY></HTML> Tue, 24 Mar 2015 15:41:21 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/How-to-communicate-with-I2C-device-in-the-project-generated-by/m-p/345380#M16822 吕晨赵 2015-03-24T15:41:21Z Re: How to communicate with I2C device in the project generated by freescale BeeKit https://community.nxp.com/t5/Kinetis-Microcontrollers/How-to-communicate-with-I2C-device-in-the-project-generated-by/m-p/345381#M16823 <HTML><HEAD></HEAD><BODY><P><SPAN style="color: #1f497d;">Hello,</SPAN></P><P></P><P><SPAN style="color: #1f497d;">Please refer to post <A _jive_internal="true" href="https://community.nxp.com/message/497580"><SPAN style="color: #1f497d;"></SPAN></A><A href="https://community.freescale.com/message/497580" target="test_blank">https://community.freescale.com/message/497580</A></SPAN>, there are some recommendations of what you could do in order to use the I2C module to communicate with a FXOS8700 or a MMA8451.</P><P></P><P><SPAN style="color: #1f497d;">Regards,</SPAN></P><P><SPAN style="color: #1f497d;">AngelC,</SPAN></P></BODY></HTML> Wed, 25 Mar 2015 16:50:05 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/How-to-communicate-with-I2C-device-in-the-project-generated-by/m-p/345381#M16823 AngelC 2015-03-25T16:50:05Z