topic Re: How to display internal uP config registers in Kinetis Microcontrollers

How to display internal uP config registers

holyhope — Fri, 20 Mar 2015 13:44:44 GMT

Hi to all,

I'm developing on K60 with KDS 2.0.0

I want to see , when debugging, the uP config register like CFG1 of ADC0?

There is possibility to show Register like R1 ecc... that are internal register , i want only see the configuration register.

With PEx there is the page "Configuration Register" but it is an offline version, I want something that the debug ask to the board! So in this way I'm sure that the configuration register is the correct numbre present on this time on the board

what I can do?

thanks,

Max

Re: How to display internal uP config registers

BlackNight — Fri, 20 Mar 2015 13:51:20 GMT

There is an open source plugin you can add and use, see

http://mcuoneclipse.com/2014/05/29/how-to-add-register-details-view-in-eclipse/

Erich

Re: How to display internal uP config registers

holyhope — Fri, 20 Mar 2015 14:13:16 GMT

Many thanks for your answer.

Now I'm installing the plug in!!!

In the description is the perfect plug in for me!

The mcuoneclipse.com tell me another very important information!

thanks,

Massimiliano

Edit: I installed and test this plug-in.... All Works right! thanks,

Massimiliano