KEA128 flashing failed

saya — Thu, 29 Jan 2015 16:28:31 GMT

Hi,everyone:

I am using CW 10.6.

I was able to flash my KEA128 without problems, but all the sudden it won't flashing anymore, I got this error when trying:

fl::target -lc "LC for Simple Flash (2)"

fl::target -b 0x1ffff000 0x4000

fl::target -v off -l off

cmdwin::fl::device -d "FTMRE_PFlash128RAM16" -o "32kx32x1" -a 0x0 0x1ffff

cmdwin::fl::image -f "C:\\..\\TRK-KEA128_Lab1.elf" -t "Auto Detect" -re on -r 0x0 0x1ffff -oe off

cmdwin::fl::erase image

Beginning Operation ...

-------------------------

Auto-detection is successful.

File is of type Elf Format.

Performing target initialization ...

Device FTMRE_PFlash128RAM16 is protected

Erasing ...........

Erase Command Succeeded.

Device FTMRE_PFlash128RAM16 is protected

cmdwin::fl::write

-------------------------

Flash Operation. ...

Auto-detection is successful.

File is of type Elf Format.

Device FTMRE_PFlash128RAM16 is protected

Programming ....

Device FTMRE_PFlash128RAM16 is protected

Error: Program Command Failed.

This happens to any project I am trying to flash into the board.

Any help is appreciated!

Alan

Re: KEA128 flashing failed

saya — Thu, 29 Jan 2015 18:22:39 GMT

I changed the connection option, and it is working again, could someone explain this a bit?

saya — Thu, 29 Jan 2015 21:24:05 GMT

I figured it out, the initialization and memory tab were not configured correctly.