Kinetis MicrocontrollersのトピックHow to load code for KL16Z MCU via OpenSDA on FRDM-KL25Z board https://community.nxp.com/t5/Kinetis-Microcontrollers/How-to-load-code-for-KL16Z-MCU-via-OpenSDA-on-FRDM-KL25Z-board/m-p/327725#M15139 <HTML><HEAD></HEAD><BODY><P>Hi all,</P><P>I have a board use MCU KL16Z, I want to load code via SWD. <SPAN style="font-size: 10pt; line-height: 1.5em;">And I use Open SDA Interface on FRDM-KL25Z board, I connect them in the same pin.</SPAN></P><P>But when I load code into device, software error. I use IAR Embedded Workbench IDE for program device.</P><P>I tried to cut&nbsp; a cut-trace J11 on FRDM-KL25Z board, load MKL25Z and MKL26Z firmware for OpenSDA but it does not work.</P><P>You can share your feedback for me?</P></BODY></HTML> Thu, 18 Sep 2014 09:32:29 GMT letran 2014-09-18T09:32:29Z How to load code for KL16Z MCU via OpenSDA on FRDM-KL25Z board https://community.nxp.com/t5/Kinetis-Microcontrollers/How-to-load-code-for-KL16Z-MCU-via-OpenSDA-on-FRDM-KL25Z-board/m-p/327725#M15139 <HTML><HEAD></HEAD><BODY><P>Hi all,</P><P>I have a board use MCU KL16Z, I want to load code via SWD. <SPAN style="font-size: 10pt; line-height: 1.5em;">And I use Open SDA Interface on FRDM-KL25Z board, I connect them in the same pin.</SPAN></P><P>But when I load code into device, software error. I use IAR Embedded Workbench IDE for program device.</P><P>I tried to cut&nbsp; a cut-trace J11 on FRDM-KL25Z board, load MKL25Z and MKL26Z firmware for OpenSDA but it does not work.</P><P>You can share your feedback for me?</P></BODY></HTML> Thu, 18 Sep 2014 09:32:29 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/How-to-load-code-for-KL16Z-MCU-via-OpenSDA-on-FRDM-KL25Z-board/m-p/327725#M15139 letran 2014-09-18T09:32:29Z Re: How to load code for KL16Z MCU via OpenSDA on FRDM-KL25Z board https://community.nxp.com/t5/Kinetis-Microcontrollers/How-to-load-code-for-KL16Z-MCU-via-OpenSDA-on-FRDM-KL25Z-board/m-p/327726#M15140 <HTML><HEAD></HEAD><BODY><P>Articles on that subject:</P><UL><LI><A href="http://mcuoneclipse.com/2013/04/21/using-the-freedom-board-as-jtag-programmer/" title="http://mcuoneclipse.com/2013/04/21/using-the-freedom-board-as-jtag-programmer/">Using the Freedom Board as SWD Programmer | MCU on Eclipse</A></LI><LI><A href="http://mcuoneclipse.com/2013/04/27/debug-external-processors-with-usbdm-and-freedom-board/" title="http://mcuoneclipse.com/2013/04/27/debug-external-processors-with-usbdm-and-freedom-board/">Debug External Processors with USBDM and Freedom Board | MCU on Eclipse</A></LI><LI><A href="http://mcuoneclipse.com/2012/11/07/jtagswd-debugging-with-the-frdm-kl25z-board/" title="http://mcuoneclipse.com/2012/11/07/jtagswd-debugging-with-the-frdm-kl25z-board/">JTAG/SWD Debugging with the FRDM-KL25Z Board | MCU on Eclipse</A></LI><LI><A href="http://mcuoneclipse.com/2013/05/16/freedom-board-with-segger-opensda-debug-firmware/" title="http://mcuoneclipse.com/2013/05/16/freedom-board-with-segger-opensda-debug-firmware/">http://mcuoneclipse.com/2013/05/16/freedom-board-with-segger-opensda-debug-firmware/</A></LI></UL><P>I hope this helps,</P><P>Erich</P></BODY></HTML> Thu, 18 Sep 2014 18:29:08 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/How-to-load-code-for-KL16Z-MCU-via-OpenSDA-on-FRDM-KL25Z-board/m-p/327726#M15140 BlackNight 2014-09-18T18:29:08Z