topic UART transmition in isr for k60 in Kinetis Microcontrollers

UART transmition in isr for k60

pallenna — Sat, 21 Feb 2015 10:21:54 GMT

Hi to all,

I am using TWR-k60d100m and twr-k60f120m with Codewarrior 10.2. Now i want to interface UART for data transmit and receive using ISR. and i want to send data to the Hyper terminal and read data from the Hyper terminal for this what can i do and i am new to this, if any one done this experiment please tell me the flow and post the example if you have any.i have already did the transmitting with polling and receiving in ISR using TWR-k60f120m and CW10.2 please find the attached code.

Original Attachment has been moved to: uart.c.txt.zip

Original Attachment has been moved to: isr.h.txt.zip

Re: UART transmition in isr for k60

adriancano — Tue, 24 Feb 2015 21:38:26 GMT

Hi,

Attached you can find a driver code for the UART module in K devices. Please refer to the code for more details.

Hope this information can help you

Best Regards,
Adrian Sanchez Cano
Technical Support Engineer
-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: UART transmition in isr for k60

pallenna — Wed, 25 Feb 2015 08:40:17 GMT

Hi Adrian Sanchez Cano,

Thanks for your reply.

Thanks and Regards,

padmaja