topic Re: OpenOCD with FRDM-K64F support in Kinetis Microcontrollers https://community.nxp.com/t5/Kinetis-Microcontrollers/OpenOCD-with-FRDM-K64F-support/m-p/315222#M13784 <HTML><HEAD></HEAD><BODY><P>By now you should have received the download link, otherwise let me know.</P><P>The scripts/tcl files are located inside C:\Freescale\KDS_1.0.1\openocd\scripts (attached)</P><P></P><P>Regards,</P><P>Erich</P></BODY></HTML> Fri, 06 Jun 2014 06:59:10 GMT BlackNight 2014-06-06T06:59:10Z OpenOCD with FRDM-K64F support https://community.nxp.com/t5/Kinetis-Microcontrollers/OpenOCD-with-FRDM-K64F-support/m-p/315221#M13783 <HTML><HEAD></HEAD><BODY><P>Hi, </P><P></P><P>I'd like to debug my FRDM-K64 with OpenOCD. I built it with cmsis-dap support from the master of openocd git. </P><P></P><P>I tried to make it work by adapting the k60.cfg with cortex_m4 chip ID, but I can't get it work properly (not supported MCU error when i try to attach gdb) . </P><P></P><P>Is there somewhere some patch or special tcl config for k64 available ? </P><P></P><P>What version of OpenOCD is used in KDS (waiting for download approval) ? </P><P></P><P>Are the tcl used by KDS available somewhere (kinetis.cfg and k64.cfg)</P><P></P><P>Regards</P></BODY></HTML> Fri, 06 Jun 2014 06:01:30 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/OpenOCD-with-FRDM-K64F-support/m-p/315221#M13783 stanymarcel 2014-06-06T06:01:30Z Re: OpenOCD with FRDM-K64F support https://community.nxp.com/t5/Kinetis-Microcontrollers/OpenOCD-with-FRDM-K64F-support/m-p/315222#M13784 <HTML><HEAD></HEAD><BODY><P>By now you should have received the download link, otherwise let me know.</P><P>The scripts/tcl files are located inside C:\Freescale\KDS_1.0.1\openocd\scripts (attached)</P><P></P><P>Regards,</P><P>Erich</P></BODY></HTML> Fri, 06 Jun 2014 06:59:10 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/OpenOCD-with-FRDM-K64F-support/m-p/315222#M13784 BlackNight 2014-06-06T06:59:10Z