Kinetis Microcontrollers中的主题 Re: Move from MC1322x to MKW24D512

Move from MC1322x to MKW24D512

fabricetocci — Fri, 04 Apr 2014 12:37:31 GMT

Hi,

We have built several applications based on MC1322x ARM7 ZigBee chip and we want to migrate to Kinetis MKW24D512 Cortex-M4

Is there an application note that documents MKW24 software architecture?

Is there a reference manual for MKW24 software drivers?

What kind of documents can I use to ease the software migration?

Maybe you did that move and will provide me good advises.

Best regards.

Fabrice.

Re: Move from MC1322x to MKW24D512

perlam_i_au — Mon, 07 Apr 2014 21:07:36 GMT

Have you reviewed information related to the stand alone application BEEKIT_WIRELESS_CONNECTIVITY_TOOLKIT: BeeKit Wireless Connectivity Toolkit? this is part of the reference documentation that you will find on "Software & Tools" tag on KW2x: Kinetis KW2x Family of 2.4 GHz RF MCUs product home page.

Have a nic day :P,
Perla

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: Move from MC1322x to MKW24D512

fabricetocci — Tue, 08 Apr 2014 12:49:34 GMT

Hi Andrea,

Yes I did reviewed BeeKit toolkit UG at first.

As I said, I made several developments with Beekit tool on MC1322x platform, so I know how to use beekit.

We want to migrate all our products on Kinetis KW24, so we need to port our existing software to KW24 SW architecture.

What I need is: a document that lists all the changes between MC1322x and kinetis KW24 looking to HW and SW perspectives.

KW24 should have new HW modules compare to MC1322x, and maybe some have been removed.

As consequence, the SW architecture have been modified.

Is there a document that describes these chances?

Have you heard about other customers that moved from MC1322x to KW24?

I'm sure I'm not the only one.

Best regards.

Fabrice Tocci

Re: Re: Move from MC1322x to MKW24D512

perlam_i_au — Tue, 08 Apr 2014 18:03:24 GMT

Well at this moment I have not seen any document which describe how to migrate from MC1322x to Kinetis :smileysad:. Below you will find a table with comparison between modules from both device families, I hope you find it useful to check general changes.

MC1322x	KW2x
ARM7 TDMI-S	ARM Cortex -M4
ARM interrupt controller	ARM interrupt controller
Inernal watchdog	Internal and external watchdog
DMA for Transceiver	DMA
x	Low-leakage wake-up unit
Clock and Reset	x
	FLL
PLL	PLL
RF oscillator and Clock Generator	Low/High-frequency Oscillators
x	Internal Reference Clocks
Timer module	Flex Timer
x	Programmable delay clock
x	Periodic Interrupt Timer
x	Low-Power Timer
x	Independent Real-Time generator (RTC)
Advanced security module	Cryptography Authentication Unit
x	Cyclyc redundancy check
x	Tamper Detect
x	Random Number Generator
ROM 80KB	x
SPI Flash 128KB	FLASH +512KB
RAM 96KB	SRAM +64KB
	FlexMemory 64KB-FlexNVM and 4KB-FlexRAM (optional)
IEEE 802.15.4 Transceiver	IEEE 802.15.4 Transceiver
Balun	x
x	32MHz oscillator
x	Fast Antena diversity
x	Dual PAN ID
SPI interface for Transceiver	SPI interface for Transceiver
SCO/UART	x
x	UART ISO 7816
SSI/I2S	x
I2S	x
x	I2C
x	USB OTG HS
x	USB Charger
x	USB voltage regulator
Keyboard interface	x
SPI interface	SPI interface
GPIO +64	GPIO 29
ADC 12-bit	ADC 16-bit
x	High-speed comparator with 6-bit DAC
JTAG	JTAG
x	cJTAG
x	SWD
Nexus	x
Buck converter	x
Analog power management and voltage regulation	x
Battery Monitor	x

I will let you know about any other document that could be useful.

Have a nic day :P,
Perla

Re: Re: Move from MC1322x to MKW24D512

fabricetocci — Wed, 09 Apr 2014 06:10:02 GMT

Hi Perla,

Thank you for this comparison table, it helps me understanding the changes at IC modules level.

In BeeKit Documentation/IC documents directory there is MC1322 Software drivers reference Manual, where can I find KW2x software driver reference manual?

It is not part of beeKit package.

Have a nice day Perla.

Fabrice.

Re: Move from MC1322x to MKW24D512

perlam_i_au — Wed, 09 Apr 2014 15:21:03 GMT

I am afraid that at this moment KW24 is very new and there is not a Drivers Reference Manual for this new product yet. In this case I suggest you to enter a Service Request in case you have very specific questions regard how to use the KW24.

Re: Move from MC1322x to MKW24D512

fabricetocci — Thu, 10 Apr 2014 13:21:45 GMT

Hi Perla,

Thank you for your reply.

I'll get in touch with technical support to get details on drivers.

I merged my code into KW24 code base and had to stub many files to have a free error build.

Now I need to get details on ADC, GPIO, I2C, TMR, LPM, Buzzer, Watchdog changes to complete MC1322x code porting to KW24

Have a nice day Perla.

Fabrice.

Re: Move from MC1322x to MKW24D512

jc_pacheco — Thu, 10 Apr 2014 20:14:36 GMT

Hello Fabrice!

Unfortunatelly, there's not a document for MKW2x about driver's usage as it was for MC1322x (22xDRVRRM.pdf) . That document was created for MC1322x because those drivers were in ROM... therefore the customer couldn't know how to use/call the functions in detail. In MKW2x, customer has direct access to the driver's code so that information is found within each driver