topic Re: win_hc08sprg.exe in Kinetis Microcontrollers

win_hc08sprg.exe

isabelbenitez — Fri, 21 Mar 2014 12:23:20 GMT

I am trying the bootloader with the appnote 2295. But the win_hc08sprg.exe always make this:

Which may be the problem? Thank you.

Re: win_hc08sprg.exe

perlam_i_au — Fri, 21 Mar 2014 22:30:06 GMT

As long as your device is not even establishing connection (identification pane has not information) I suggest you to ensure that your device is on that COM port.

Have a nice day :P,
Perla

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: win_hc08sprg.exe

isabelbenitez — Mon, 24 Mar 2014 10:51:17 GMT

I can see clearly enough the pin information. Which are exactly the pins I must connect to the com port when using a MK60DN512VLQ10? Thank you.

Re: win_hc08sprg.exe

perlam_i_au — Mon, 24 Mar 2014 21:13:13 GMT

You must connect USBx_DP and USBx_DM wich are Data+ and Data- respectively.

In order to achieve correct connection I suggest you to:

1) Connect your device to the PC

2) Open Universal boot loader AN2295 application press connect

3) Perform a Power On reset to your device-->The idea to do it in this way is to force the application to detect and sync your PC with your device communication

Have a nice day :P,
Perla

Re: win_hc08sprg.exe

isabelbenitez — Tue, 25 Mar 2014 07:11:58 GMT

it is not supossed to be connected by UART? I thought I was trying a serial communication by a serial port, not by USB.

Re: win_hc08sprg.exe

perlam_i_au — Wed, 26 Mar 2014 21:48:25 GMT

I apologize, I thougt you was using a microcontroller with USB module, you are right about UART.

You only need to connect Tx and Rx.

If you have this connection follow the steps I mentioned before