topic Re: K60D100M eval board in Kinetis Microcontrollers

K60D100M eval board

prakashpatel — Mon, 17 Mar 2014 14:00:13 GMT

Hi,

I am trying to use external interrupt on K60D100M eval board using small processor expert program. I use SW1 (IRQ0) with low level trigger. It works okay. However when I try to use SW2 (IRQ1) same configuration, external interrupt event handler keeps on repeating. Is there any difference between those two Ports ? Looking at schematic I see no difference in circuit.

Prakash

Re: K60D100M eval board

Wlodek_D_ — Mon, 17 Mar 2014 15:25:59 GMT

Dear Prakash Patel,

Thank you for your post, however please consider moving it to the right community place (e.g. Kinetis Microcontrollers ) for better visibility.

For details please see general advice https://community.freescale.com/docs/DOC-99909

Thank you for using Freescale Community.

Regards,

Wlodek_D.

Re: K60D100M eval board

prakashpatel — Mon, 17 Mar 2014 17:44:18 GMT

I figured out. Port E needs a pull up register. I enabled and it is working now