Kinetis MicrocontrollersのトピックRe: kinetis library

kinetis library

josemartinez — Mon, 10 Jun 2013 11:49:38 GMT

Hello,

does anybody know if there is an eagle library for Kinetis K40 and K20 microcontroller??

Thanks,

Jose

Re: kinetis library

vicentegomez — Mon, 17 Jun 2013 22:07:13 GMT

I am not sure what are you looking for. but we have the Capture Symbol (orcad) and the Footprint (land pattern) Cadence Allegro(dra) for some of our MCU, you can find this information under the icon that is show when you search a part number. For instance, if you search the part number MK40DN512VMD10 on the ordenable part you will get the following result

http://www.freescale.com/webapp/search/MainSERP.jsp?SelectedAsset=Orderable%20Parts#breadcrumb_anchor

and on this page just make click on the icon to get MK40DN512VMD10 Information

http://www.freescale.com/webapp/search.partparamdetail.framework?PART_NUMBER=MK40DN512VMD10&buyNow=true&fromSearch=true

Where you can get information about the package, Environmental and Compliance etc

For different part number you just need to put the correct part number and follow the same process

I hope this will help you.

Regards

Vicente

Re: kinetis library

Monica — Wed, 19 Jun 2013 13:40:47 GMT

Hello Jose,

did that answered your question? Please don't forget to keep us posted :smileywink:

Best regards,

Monica

Re: kinetis library

josemartinez — Fri, 21 Jun 2013 08:03:29 GMT

Yes I solved the problem with this answer

Thanks

Jose

Re: kinetis library

davidsun — Sat, 28 Dec 2013 08:14:29 GMT

I followed your instruction and I found

MKL04Z8VFK4 Information

Product Summary Page

General Information
Package Information
Environmental and Compliance Information
Manufacturing Information
Ordering Information
Product/Process Change Notice (PCN)
Operating Characteristics
Reliability Data Lookup

continue Package information

I got 98ASA00474D.pdf from the following link. may be I have been using TI's chip for a long time. I feel it is hard to find useful information for this chip, I couldn't even find a land pattern in PDF format, in user manual, or data sheet. if not for the cost issue, I would keep using TI MSP chip. I guess I have to create the layout symbol from the chip package. it is a pain in the neck.

thanks,

David

Package Information

	Parameter	Value
	Package Type and Termination Count	QFN 24
	Package Description and Mechanical Drawing	QFN MAP 24 441 P0.5
	Device Weight(g)	.01580
	Package Length (nominal)(mm)	4.000
	Package Width (nominal)(mm)	4.000
	Package Thickness (nominal)(mm)	1.000
	Tape & Reel	No