Kinetis MicrocontrollersのトピックRe: KL15: Missing [PLLFLLSEL] bits in SIM_SOPT2?

KL15: Missing [PLLFLLSEL] bits in SIM_SOPT2?

Safwat — Tue, 23 Apr 2013 10:18:37 GMT

I am trying to route the output of the PLL to clock the UART0. In the ref manual, chapter 5 page 117, clocking options for UART0 are shown as below:

But I could not find PLLFLLSEL bits in the SIM_SOPT2. The description of SIM_SOPT2 is shown as below (Section 12.2.3 page 186):

Anyone know are these bits implemented for KL15 chips?

thanks!

Re: KL15: Missing [PLLFLLSEL] bits in SIM_SOPT2?

Paul_Tian — Tue, 23 Apr 2013 13:22:56 GMT

Hi, Safwat

This is a document issue. The bit 16 in register SIM_SOPT2 is PLLFLLSEL.

Hope my reply can help you.

Best Regards

Paul

Re: KL15: Missing [PLLFLLSEL] bits in SIM_SOPT2?

Safwat — Tue, 23 Apr 2013 14:23:08 GMT

Thanks Paul. Good to know its there :smileyhappy:

Re: KL15: Missing [PLLFLLSEL] bits in SIM_SOPT2?

markosiponen — Fri, 19 Jul 2013 08:27:04 GMT

The SIM_SOPT2_PLLFLLSEL bit is also missing in Processor Expert generated file (IO_Map.h):

/* SOPT2 Bit Fields */
#define SIM_SOPT2_RTCCLKOUTSEL_MASK              0x10u
#define SIM_SOPT2_RTCCLKOUTSEL_SHIFT             4
#define SIM_SOPT2_CLKOUTSEL_MASK                 0xE0u
#define SIM_SOPT2_CLKOUTSEL_SHIFT                5
#define SIM_SOPT2_CLKOUTSEL(x)                   (((uint32_t)(((uint32_t)(x))<<SIM_SOPT2_CLKOUTSEL_SHIFT))&SIM_SOPT2_CLKOUTSEL_MASK)
#define SIM_SOPT2_TPMSRC_MASK                    0x3000000u
#define SIM_SOPT2_TPMSRC_SHIFT                   24
#define SIM_SOPT2_TPMSRC(x)                      (((uint32_t)(((uint32_t)(x))<<SIM_SOPT2_TPMSRC_SHIFT))&SIM_SOPT2_TPMSRC_MASK)
#define SIM_SOPT2_UART0SRC_MASK                  0xC000000u
#define SIM_SOPT2_UART0SRC_SHIFT                 26
#define SIM_SOPT2_UART0SRC(x)                    (((uint32_t)(((uint32_t)(x))<<SIM_SOPT2_UART0SRC_SHIFT))&SIM_SOPT2_UART0SRC_MASK)
/* SOPT4 Bit Fields */