topic Socket message in Kinetis Microcontrollers https://community.nxp.com/t5/Kinetis-Microcontrollers/Socket-message/m-p/277496#M10056 <HTML><HEAD></HEAD><BODY><P>We are using K60 for our product development.</P><P>This unit stops receiving messages over the tcp socket over GPRS ( PPP ) after approximately 80K bytes.</P><P>Is there any restriction set or should we have to change any of the macros for this. Please let me know</P><P>Thanks in advance</P></BODY></HTML> Thu, 06 Mar 2014 05:49:16 GMT userforfirsttim 2014-03-06T05:49:16Z Socket message https://community.nxp.com/t5/Kinetis-Microcontrollers/Socket-message/m-p/277496#M10056 <HTML><HEAD></HEAD><BODY><P>We are using K60 for our product development.</P><P>This unit stops receiving messages over the tcp socket over GPRS ( PPP ) after approximately 80K bytes.</P><P>Is there any restriction set or should we have to change any of the macros for this. Please let me know</P><P>Thanks in advance</P></BODY></HTML> Thu, 06 Mar 2014 05:49:16 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/Socket-message/m-p/277496#M10056 userforfirsttim 2014-03-06T05:49:16Z Re: Socket message https://community.nxp.com/t5/Kinetis-Microcontrollers/Socket-message/m-p/277497#M10057 <HTML><HEAD></HEAD><BODY><P style="margin-bottom: .0001pt;">Hi, </P><P></P><P style="margin-bottom: .0001pt;">Could you please try increasing the <SPAN>the socket buffer's size</SPAN>?</P><P></P><P style="margin-bottom: .0001pt;">Regards</P><P></P><P style="margin-bottom: .0001pt;">Sol </P></BODY></HTML> Thu, 03 Apr 2014 01:10:21 GMT https://community.nxp.com/t5/Kinetis-Microcontrollers/Socket-message/m-p/277497#M10057 soledad 2014-04-03T01:10:21Z