Efuse burning using MfgTools/Flashloader

farid_mabrouk — Thu, 23 Apr 2020 03:48:23 GMT

@kerry Zhou

I hope you are doing well!

I have been able to use MCUboot Utility to burn the efuses and program the flash; thank you for helping with that!

Now our requirements changed, we need to do all the efuse burning and flash programming using Flashloader/MfgTools. Could you please recommend and user guide or document I could use to do the flash programming and efuse burning.

what are the registers addresses and names for efuses burning?

Thank you all for your help!

Re: Efuse burning using MfgTools/Flashloader

kerryzhou — Thu, 23 Apr 2020 05:54:30 GMT

Hi Andre marcus ,

Thanks a lot for your trust, you can refer to the application note AN12079:

https://www.nxp.com/webapp/sps/download/mod_download.jsp?colCode=AN12079&location=null&appType=moderated

Chapter 4.3. Program fuse

Wish it helps you!

If you still have questions about it, please kindly let me know.

Have a great day,
Kerry

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

topic Re: Efuse burning using MfgTools/Flashloader in i.MX RT Crossover MCUs

Efuse burning using MfgTools/Flashloader

Re: Efuse burning using MfgTools/Flashloader