topic Re: How To Use Clocks Config Tool? in i.MX RT Crossover MCUs

How To Use Clocks Config Tool?

omerkaanbasakin — Sat, 04 Jul 2020 14:41:21 GMT

Hı ı am working on imxrt 1052 in MCUXpresso11.1.1. I tried to change clock settings in source files and config tool but ı could not. How can USDHC1 set as in example?

Re: How To Use Clocks Config Tool?

kerryzhou — Mon, 06 Jul 2020 06:22:45 GMT

Hi Omer Kaan Basakinci ,

Please check your clock:

The example clock:

The example is using the system PLL, but you didn't.

So, select the system PLL clock on your clocks diagram.

Double click the PL2_PFD2_BYPASS:

Select the PLL2 PFD2 output, not the PLL2 bypass clock selector output.

Wish it helps you!

If you still have questions about it, please kindly let me know.

Best Regards,

Kerry

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: How To Use Clocks Config Tool?

omerkaanbasakin — Tue, 07 Jul 2020 10:50:41 GMT

hi kerryzhou‌,

Thanks for your reply,

I can make changes thanks to you. I changed

Re: How To Use Clocks Config Tool?

kerryzhou — Wed, 08 Jul 2020 02:57:21 GMT

You are welcome!

Any new question in the future, welcome to create the new question post!

Best Regards,

Kerry