topic Re: mimxrt1050_evk flashed to j-link, "MCIMXRT1052 is not supported by this j-link" in i.MX RT Crossover MCUs

mimxrt1050_evk flashed to j-link, "MCIMXRT1052 is not supported by this j-link"

natester — Tue, 21 Nov 2017 08:15:37 GMT

I flashed my RT1050-EVK with the Segger J-Link 2.1 firmware as described here: NXP MIMXRT1050-EVK — Zephyr Project Documentation

When I run the Zephyr examples, the J-Link is fine:

When I use MCUXpresso to run the examples though, I get this error:

How do I configure the target?

Thanks,

Nathan

Re: mimxrt1050_evk flashed to j-link, "MCIMXRT1052 is not supported by this j-link"

CarlosCasillas — Fri, 24 Nov 2017 02:23:42 GMT

Hi Nathan,

According with the Release Notes of the last MCUXpresso release (Version 10.1.0, Nov 2017), it added support for Environment variables in JLink options:

https://www.nxp.com/docs/en/release-note/MCUXpresso-RN.pdf

Have you ensured that you are using this version?

Additionally, have you ensured that the used examples are supported on MCUXpresso?

In case of the MCUXpresso SDK Builder, it only supports GCC ARM Embedded, IAR Embedded Workbench for ARM and Keil MDK toolchains:

https://mcuxpresso.nxp.com/en/select

The following Community document may be also useful:

https://community.nxp.com/docs/DOC-333073

Hope this will be useful for you.

Best regards!

/Carlos

Re: mimxrt1050_evk flashed to j-link, "MCIMXRT1052 is not supported by this j-link"

natester — Sun, 26 Nov 2017 06:41:47 GMT

Thanks for the reply CarlosCasillas.

I have version Version: MCUXpresso IDE v10.1.0 [Build 589] [2017-11-14]

And I just re-downloaded the mcuxpresso build from your link, and I still don't see the project:

I see the files on disk:

Re: mimxrt1050_evk flashed to j-link, "MCIMXRT1052 is not supported by this j-link"

CarlosCasillas — Tue, 28 Nov 2017 16:30:21 GMT

Hi Nathan,

I have double checked the compatibility, and MCUXpresso SDK for i.MX RT is now supported on MCUXpresso IDE.

However, you need to drag&drop the ZIP file before importing SDK examples. I have attached a video showing the procedure.

Hope this will be useful for you.

Best regards!

/Carlos

-----------------------------------------------------------------------------------------------------------------------
Note: If this post answers your question, please click the Correct Answer button. Thank you!
-----------------------------------------------------------------------------------------------------------------------

Re: mimxrt1050_evk flashed to j-link, "MCIMXRT1052 is not supported by this j-link"

natester — Thu, 05 Apr 2018 20:53:13 GMT

I just heard back from Segger and they are adding support for this specific target in their opensda firmware! So it should work seamlessly once that is added

Re: mimxrt1050_evk flashed to j-link, "MCIMXRT1052 is not supported by this j-link"

kyleyang — Wed, 11 Apr 2018 15:40:01 GMT

Hi Nathan,

Sorry to bother you.

Would you mind share more information about the related download resources?

Thanks.

Re: mimxrt1050_evk flashed to j-link, "MCIMXRT1052 is not supported by this j-link"

natester — Wed, 11 Apr 2018 15:42:13 GMT

No bother at all, this is the note from Segger:

Hello Nathan,

At this time, our Engineering is tentatively scheduling support for this device to be added sometime toward the end of April. You may subscribe to our J-Link Notification email list to be informed as soon as any new features have been added by visiting: https://www.segger.com/notification/subscribe.php?prodid=7. Have a good day.

Best regards,
Shane Titus
SEGGER Microcontroller

Re: mimxrt1050_evk flashed to j-link, "MCIMXRT1052 is not supported by this j-link"

maureen — Mon, 04 Mar 2019 22:58:03 GMT

Hi Nathan and Kyle,

I'm sorry for the late notice, but the OpenSDA firmware is now available here:

https://www.segger.com/downloads/jlink/OpenSDA_MIMXRT1050-EVK-Hyperflash

Zephyr build targets for flashing and debugging ('ninja flash' and 'ninja debug' respectively) now work as expected on this board. The board documentation is in the process of being updated:

doc: debugging: Introduce guide covering debug probes and host tools by MaureenHelm · Pull Request #14000 · zephyrprojec…

Maureen