i.MX RT Crossover MCUs中的主题 Debug configuration disabled

Debug configuration disabled

meravs — Wed, 16 Oct 2019 06:18:21 GMT

Hi,

I'm unable to change Debugger configuration the (Attach only for example) stays the same no matter what i do.

Environment:

MCUXpresso 10.3.0.

Ubuntu 18.04.3 LTS

thank you.

Re: Debug configuration disabled

jorge_a_vazquez — Thu, 17 Oct 2019 22:24:55 GMT

Hi Merav Strassberg

Did you change the debug configuration to make a flash process?

I would like to verify that the problem is related to the IDE and the launch config and not with the board or the project that you are using. Are you able to erase the .launch configuration debug? if you erase it and create a new one, the error persists?

Best regards

Jorge Alcala

Re: Debug configuration disabled

meravs — Sun, 20 Oct 2019 06:42:28 GMT

Hi Jorge Alcala,

Yes, after erasing the .launch configuration, and creating a new one the error persists.

I Also tried changing my MCUXpresso version to 10.3.0 but it did not help .

Thank you.

Re: Debug configuration disabled

jorge_a_vazquez — Mon, 21 Oct 2019 20:38:33 GMT

Hi Merav Strassberg

Can you please confirm that you don't have selected the "Attach to a running target using LinkServer" as the image below?

If you select this option, it is marked as default, so you have to select the debug option for the new .lauch configuration.

Hope this helps

Regards

Re: Debug configuration disabled

meravs — Wed, 23 Oct 2019 06:16:41 GMT

I use the first option : Debug using LinkServer probes

Re: Debug configuration disabled

jorge_a_vazquez — Thu, 24 Oct 2019 19:28:53 GMT

Hi Merav Strassberg

Could you share a screenshot of your screen when you tried to debug? Are you using the evaluation board or a custom board? (please verify the boot config pins).

Best regards

Jorge Alcala