topic RT1170 EVKB Multicore project and LinkServer Flash programmer not working (mcuxpresso vs code) in i.MX RT Crossover MCUs https://community.nxp.com/t5/i-MX-RT-Crossover-MCUs/RT1170-EVKB-Multicore-project-and-LinkServer-Flash-programmer/m-p/2171441#M35216 <DIV><DIV><SPAN>I have a project based on the freeRTOS multicore message buffers example from nxp SDK.&nbsp;<BR />There seem to be a problem with the LinkServer Flash Programmer in the mcuxpresso for vs code extension.<BR /><BR />I am sometimes able to flash the m7 firmware which loads the M4 to the correct ocram adress. Very often the flash programmer fails and the board stops running it's code.&nbsp;<BR /><BR />What is the cause of this and how can I fix it so that I'm always able to flash the m7 correctly?&nbsp;<BR /><BR />Thanks!<BR /><BR /><STRONG>Log when failing:&nbsp;</STRONG><BR /><BR />[</SPAN><SPAN>2025-09-18T00:58:40.377</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Users/melker/.mcuxpressotools/pemicrogdbserver/pegdbserver_console -showhardware</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T00:58:40.379</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Applications/LinkServer_25.</SPAN><SPAN>7</SPAN><SPAN>.</SPAN><SPAN>33</SPAN><SPAN>/LinkServer probes --json</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T00:58:40.380</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Applications/SEGGER/JLink_V824/JLinkGDBServerCLExe -listprobes USB</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T00:58:41.772</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Users/melker/.mcuxpressotools/pemicrogdbserver/pegdbserver_console -showhardware</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T00:58:41.773</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Applications/SEGGER/JLink_V824/JLinkGDBServerCLExe -listprobes USB</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T00:58:41.773</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Applications/LinkServer_25.</SPAN><SPAN>7</SPAN><SPAN>.</SPAN><SPAN>33</SPAN><SPAN>/LinkServer probes --json</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T00:58:44.950</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Applications/LinkServer_25.</SPAN><SPAN>7</SPAN><SPAN>.</SPAN><SPAN>33</SPAN><SPAN>/LinkServer flash --probe H3RHID4AC30FD --no-boot MIMXRT1176xxxxx:MIMXR</SPAN><SPAN>T1170</SPAN><SPAN>-EVKB load /Users/melker/CodeProjects/AudioBox/code/code_primary_core/armgcc/flexspi_nor_debug/freertos_message_buffers_primary_core.elf</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T00:58:48.405</SPAN><SPAN>] [proc] </SPAN><SPAN>[error]</SPAN><SPAN> /Applications/LinkServer_25.</SPAN><SPAN>7</SPAN><SPAN>.</SPAN><SPAN>33</SPAN><SPAN>/LinkServer exited with code </SPAN><SPAN>255</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T00:58:48.405</SPAN><SPAN>] [proc] </SPAN><SPAN>[error]</SPAN><SPAN> Firmware update `check`: not required - forced update can be performed using: `./LinkServer probe #</SPAN><SPAN>1</SPAN><SPAN> update forced`</SPAN></DIV><DIV><SPAN>Ns: LinkServer RedlinkMulti Driver </SPAN><SPAN>v25.7</SPAN><SPAN> (Jul </SPAN><SPAN>21</SPAN> <SPAN>2025</SPAN> <SPAN>20:37:00</SPAN><SPAN> - crt_emu_cm_redlink build </SPAN><SPAN>1038</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Pc: ( </SPAN><SPAN>0</SPAN><SPAN>) Reading remote configuration</SPAN></DIV><DIV><SPAN>Wc(</SPAN><SPAN>03</SPAN><SPAN>). No cache support.</SPAN></DIV><DIV><SPAN>Nc: Found generic directory XML file in /var/folders/8x/1csc34zn7pq1_ksyf9k3x24h0000gn/T/tmp3tmcfgxp/crt_directory.xml</SPAN></DIV><DIV><SPAN>Pc: ( </SPAN><SPAN>5</SPAN><SPAN>) Remote configuration complete</SPAN></DIV><DIV><SPAN>Nc: Reconnected to existing LinkServer process.</SPAN></DIV><DIV><SPAN>Wc: ============= SCRIPT: </SPAN><SPAN>RT1170_connect_M7_wake_M4.scp</SPAN><SPAN> =============</SPAN></DIV><DIV><SPAN>Wc: R</SPAN><SPAN>T1170</SPAN><SPAN> Connect M7 and Wake M4 Script</SPAN></DIV><DIV><SPAN>Wc: DpID = 6BA02477</SPAN></DIV><DIV><SPAN>Wc: APID = </SPAN><SPAN>0x84770001</SPAN></DIV><DIV><SPAN>Wc: Setting M4 spin code</SPAN></DIV><DIV><SPAN>Wc: Setting M4 clock</SPAN></DIV><DIV><SPAN>Wc: Resetting M4 core</SPAN></DIV><DIV><SPAN>Wc: View cores on the DAP AP</SPAN></DIV><DIV><SPAN>Wc: DpID = 6BA02477</SPAN></DIV><DIV><SPAN>Wc: TAP </SPAN><SPAN>0</SPAN><SPAN>: 6BA02477 Core </SPAN><SPAN>0</SPAN><SPAN>: M7 APID: </SPAN><SPAN>84770001</SPAN><SPAN> ROM Table: E00FD003*</SPAN></DIV><DIV><SPAN>Wc: TAP </SPAN><SPAN>0</SPAN><SPAN>: 6BA02477 Core </SPAN><SPAN>1</SPAN><SPAN>: M4 APID: </SPAN><SPAN>24770011</SPAN><SPAN> ROM Table: E00FF003</SPAN></DIV><DIV><SPAN>Wc: ============= END SCRIPT ========================================</SPAN></DIV><DIV><SPAN>Nc: Probe Firmware: MCU-LINK on-board (r0E2) CMSIS-DAP </SPAN><SPAN>V3.160</SPAN><SPAN> (NXP Semiconductors)</SPAN></DIV><DIV><SPAN>Nc: Serial Number: H3RHID4AC30FD</SPAN></DIV><DIV><SPAN>Nc: VID:PID: </SPAN><SPAN>1FC9:0143</SPAN></DIV><DIV><SPAN>Nc: USB Path: </SPAN><SPAN>0014:0002:00</SPAN></DIV><DIV><SPAN>Nc: Using memory from core </SPAN><SPAN>0</SPAN><SPAN> after searching for a good core</SPAN></DIV><DIV><SPAN>Pc: ( </SPAN><SPAN>30</SPAN><SPAN>) Emulator Connected</SPAN></DIV><DIV><SPAN>Pc: ( </SPAN><SPAN>40</SPAN><SPAN>) </SPAN><SPAN>Debug</SPAN><SPAN> Halt</SPAN></DIV><DIV><SPAN>Pc: ( </SPAN><SPAN>50</SPAN><SPAN>) CPU ID</SPAN></DIV><DIV><SPAN>Nc: debug interface type = CoreSight DP (DAP DP ID 6BA02477) over SWD TAP </SPAN><SPAN>0</SPAN></DIV><DIV><SPAN>Nc: processor type = Cortex-M7 (CPU ID 00000C27) on DAP AP </SPAN><SPAN>0</SPAN></DIV><DIV><SPAN>Nc: number of h/w breakpoints = </SPAN><SPAN>8</SPAN></DIV><DIV><SPAN>Nc: number of flash patches = </SPAN><SPAN>0</SPAN></DIV><DIV><SPAN>Nc: number of h/w watchpoints = </SPAN><SPAN>4</SPAN></DIV><DIV><SPAN>Nc: Probe(</SPAN><SPAN>0</SPAN><SPAN><LI-EMOJI id="lia_disappointed-face" title=":disappointed_face:"></LI-EMOJI> Connected&amp;Reset. DpID: 6BA02477. CpuID: 00000C27. </SPAN><SPAN>Info</SPAN><SPAN>: &lt;None&gt;</SPAN></DIV><DIV><SPAN>Nc: </SPAN><SPAN>Debug</SPAN><SPAN> protocol: SWD. RTCK: Disabled. Vector catch: Disabled.</SPAN></DIV><DIV><SPAN>Ns: Content of CoreSight </SPAN><SPAN>Debug</SPAN><SPAN> ROM(s):</SPAN></DIV><DIV><SPAN>Nc: RBASE E00FD000: CID B105100D PID </SPAN><SPAN>000008E88C</SPAN><SPAN> ROM (type </SPAN><SPAN>0x1</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>1</SPAN><SPAN> E00FE000: CID B105100D PID </SPAN><SPAN>04000BB4C8</SPAN><SPAN> ROM (type </SPAN><SPAN>0x1</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>2</SPAN><SPAN> E00FF000: CID B105100D PID </SPAN><SPAN>04000BB4C7</SPAN><SPAN> ROM (type </SPAN><SPAN>0x1</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>3</SPAN><SPAN> E000E000: CID B105E00D PID </SPAN><SPAN>04000BB00C</SPAN><SPAN> Gen SCS (type </SPAN><SPAN>0x0</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>3</SPAN><SPAN> E0001000: CID B105E00D PID </SPAN><SPAN>04000BB002</SPAN><SPAN> Gen DWT (type </SPAN><SPAN>0x0</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>3</SPAN><SPAN> E0002000: CID B105E00D PID </SPAN><SPAN>04000BB00E</SPAN><SPAN> Gen (type </SPAN><SPAN>0x0</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>3</SPAN><SPAN> E0000000: CID B105E00D PID </SPAN><SPAN>04000BB001</SPAN><SPAN> Gen ITM (type </SPAN><SPAN>0x0</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>2</SPAN><SPAN> E0041000: CID B105900D PID </SPAN><SPAN>04001BB975</SPAN><SPAN> CSt ARM </SPAN><SPAN>ETMv4.0</SPAN><SPAN> type </SPAN><SPAN>0x13</SPAN><SPAN> Trace Source - Core</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>2</SPAN><SPAN> E0042000: CID B105900D PID </SPAN><SPAN>04004BB906</SPAN><SPAN> CSt type </SPAN><SPAN>0x14</SPAN> <SPAN>Debug</SPAN><SPAN> Control - Trigger, </SPAN><SPAN>e.g</SPAN><SPAN>. ECT</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>1</SPAN><SPAN> E0043000: CID B105900D PID </SPAN><SPAN>04001BB908</SPAN><SPAN> CSt CSTF type </SPAN><SPAN>0x12</SPAN><SPAN> Trace Link - Trace funnel/router</SPAN></DIV><DIV><SPAN>Nc: NXP: MIMXRT1176xxxxx</SPAN></DIV><DIV><SPAN>Nc: DAP stride is </SPAN><SPAN>1024</SPAN><SPAN> bytes (</SPAN><SPAN>256</SPAN><SPAN> words)</SPAN></DIV><DIV><SPAN>Nc: Inspected </SPAN><SPAN>v.2</SPAN><SPAN> External Flash Device on SPI using SFDP JEDEC ID </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN></DIV><DIV><SPAN>Nc: Image </SPAN><SPAN>'iMXRT1170_SFDP_FlexSPI1_A_QSPI Jul 21 2025 18:35:07'</SPAN></DIV><DIV><SPAN>Nc: Opening flash driver </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN></DIV><DIV><SPAN>Nc: Sending VECTRESET to run flash driver</SPAN></DIV><DIV><SPAN>Nc: Flash variant </SPAN><SPAN>'iMXRT1170_SFDP_FlexSPI1_A_QSPI Jul 21 2025 18:35:07'</SPAN><SPAN> detected (64MB = </SPAN><SPAN>1024</SPAN><SPAN>*64K at </SPAN><SPAN>0x30000000</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: Closing flash driver </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN></DIV><DIV><SPAN>Pc: ( </SPAN><SPAN>65</SPAN><SPAN>) Chip Setup Complete</SPAN></DIV><DIV><SPAN>Pc: ( </SPAN><SPAN>70</SPAN><SPAN>) License Check Complete</SPAN></DIV><DIV><SPAN>Nt: Loading </SPAN><SPAN>'freertos_message_buffers_primary_core.elf'</SPAN><SPAN> ELF </SPAN><SPAN>0x30000400</SPAN><SPAN> len </SPAN><SPAN>0x200</SPAN></DIV><DIV><SPAN>Nc: Opening flash driver </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN><SPAN> (already resident)</SPAN></DIV><DIV><SPAN>Nc: Sending VECTRESET to run flash driver</SPAN></DIV><DIV><SPAN>Nc: Warning - failed to start flash driver (at </SPAN><SPAN>0x2000009D</SPAN><SPAN>?) - rc Nn(</SPAN><SPAN>05</SPAN><SPAN>). Wire ACK Fault in DAP access</SPAN></DIV><DIV><SPAN>Nc: Flash Driver </SPAN><SPAN>V.2</SPAN><SPAN> startup failed - rc Nn(</SPAN><SPAN>05</SPAN><SPAN>). Wire ACK Fault in DAP access</SPAN></DIV><DIV><SPAN>Pb: (</SPAN><SPAN>100</SPAN><SPAN>) Writing Flash ended with an error.</SPAN></DIV><DIV><SPAN>Ed:05</SPAN><SPAN>: File </SPAN><SPAN>'freertos_message_buffers_primary_core.elf'</SPAN><SPAN> load failure: Nn(</SPAN><SPAN>05</SPAN><SPAN>). Wire ACK Fault in DAP access</SPAN></DIV><DIV><SPAN>Nt: Loading </SPAN><SPAN>'freertos_message_buffers_primary_core.elf'</SPAN><SPAN> ELF </SPAN><SPAN>0x30001000</SPAN><SPAN> len </SPAN><SPAN>0x30</SPAN></DIV><DIV><SPAN>Nc: Opening flash driver </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN></DIV><DIV><SPAN>Nc: request to clear DAP error failed - status </SPAN><SPAN>5</SPAN></DIV><DIV><SPAN>Pb: (</SPAN><SPAN>100</SPAN><SPAN>) Writing Flash ended with an error.</SPAN></DIV><DIV><SPAN>Ed:05</SPAN><SPAN>: File </SPAN><SPAN>'freertos_message_buffers_primary_core.elf'</SPAN><SPAN> load failure: Nn(</SPAN><SPAN>05</SPAN><SPAN>). Wire ACK Fault in DAP access</SPAN></DIV><DIV><SPAN>Nt: Loading </SPAN><SPAN>'freertos_message_buffers_primary_core.elf'</SPAN><SPAN> ELF </SPAN><SPAN>0x30002000</SPAN><SPAN> len </SPAN><SPAN>0x12044</SPAN></DIV><DIV><SPAN>Nc: Opening flash driver </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN></DIV><DIV><SPAN>Nc: request to clear DAP error failed - status </SPAN><SPAN>5</SPAN></DIV><DIV><SPAN>Pb: (</SPAN><SPAN>100</SPAN><SPAN>) Writing Flash ended with an error.</SPAN></DIV><DIV><SPAN>Ed:05</SPAN><SPAN>: File </SPAN><SPAN>'freertos_message_buffers_primary_core.elf'</SPAN><SPAN> load failure: Nn(</SPAN><SPAN>05</SPAN><SPAN>). Wire ACK Fault in DAP access</SPAN></DIV><DIV><SPAN>Nt: Loading </SPAN><SPAN>'freertos_message_buffers_primary_core.elf'</SPAN><SPAN> ELF </SPAN><SPAN>0x33FC0000</SPAN><SPAN> len </SPAN><SPAN>0x7144</SPAN></DIV><DIV><SPAN>Nc: Opening flash driver </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN></DIV><DIV><SPAN>Nc: request to clear DAP error failed - status </SPAN><SPAN>5</SPAN></DIV><DIV><SPAN>Pb: (</SPAN><SPAN>100</SPAN><SPAN>) Writing Flash ended with an error.</SPAN></DIV><DIV><SPAN>Ed:05</SPAN><SPAN>: File </SPAN><SPAN>'freertos_message_buffers_primary_core.elf'</SPAN><SPAN> load failure: Nn(</SPAN><SPAN>05</SPAN><SPAN>). Wire ACK Fault in DAP access</SPAN></DIV><DIV><SPAN>Pc: (</SPAN><SPAN>100</SPAN><SPAN>) Target Operation Failed</SPAN></DIV><DIV><SPAN>Nc: request to clear DAP error failed - status </SPAN><SPAN>5</SPAN></DIV><DIV><SPAN>Nc: request to clear DAP error failed - status </SPAN><SPAN>5</SPAN></DIV><DIV><SPAN>Nc: error closing down debug session - Nn(</SPAN><SPAN>05</SPAN><SPAN>). Wire ACK Fault in DAP access</SPAN></DIV><BR /><DIV><SPAN>INFO</SPAN><SPAN>: Exact match for MIMXRT1176xxxxx:MIMXR</SPAN><SPAN>T1170</SPAN><SPAN>-EVKB found</SPAN></DIV><DIV><SPAN>INFO</SPAN><SPAN>: Selected device MIMXRT1176xxxxx:MIMXR</SPAN><SPAN>T1170</SPAN><SPAN>-EVKB</SPAN></DIV><DIV><SPAN>INFO</SPAN><SPAN>: Getting available probes</SPAN></DIV><DIV><SPAN>INFO</SPAN><SPAN>: Selecting probe by serial substring</SPAN></DIV><DIV><SPAN>INFO</SPAN><SPAN>: Selected probe #</SPAN><SPAN>1</SPAN><SPAN> H3RHID4AC30FD (MCU-LINK on-board (r0E2) CMSIS-DAP </SPAN><SPAN>V3.160</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>INFO</SPAN><SPAN>: MCU-Link firmware update `check`: Probe ([H3RHID4AC30FD] [MCU-LINK on-board (r0E2) CMSIS-DAP </SPAN><SPAN>V3.160</SPAN><SPAN>]) is already running the same firmware version as the included firmware version [</SPAN><SPAN>3</SPAN><SPAN>.</SPAN><SPAN>160</SPAN><SPAN>]</SPAN></DIV><DIV><SPAN>CRITICAL</SPAN><SPAN>: Critical error</SPAN></DIV><DIV><SPAN>ERRMSG: </SPAN><SPAN>Exception</SPAN><SPAN>: Flash operation exited with code </SPAN><SPAN><SPAN>1<BR /><BR /><BR /><BR /><STRONG>This is the log when the flashing actually succeeds:&nbsp;</STRONG><BR /></SPAN></SPAN><DIV><BR /><DIV><SPAN>[</SPAN><SPAN>2025-09-18T01:03:12.927</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Users/melker/.mcuxpressotools/pemicrogdbserver/pegdbserver_console -showhardware</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T01:03:12.928</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Applications/SEGGER/JLink_V824/JLinkGDBServerCLExe -listprobes USB</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T01:03:12.928</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Applications/LinkServer_25.</SPAN><SPAN>7</SPAN><SPAN>.</SPAN><SPAN>33</SPAN><SPAN>/LinkServer probes --json</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T01:03:14.329</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Users/melker/.mcuxpressotools/pemicrogdbserver/pegdbserver_console -showhardware</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T01:03:14.338</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Applications/SEGGER/JLink_V824/JLinkGDBServerCLExe -listprobes USB</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T01:03:14.346</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Applications/LinkServer_25.</SPAN><SPAN>7</SPAN><SPAN>.</SPAN><SPAN>33</SPAN><SPAN>/LinkServer probes --json</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T01:03:17.511</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Applications/LinkServer_25.</SPAN><SPAN>7</SPAN><SPAN>.</SPAN><SPAN>33</SPAN><SPAN>/LinkServer flash --probe H3RHID4AC30FD --no-boot MIMXRT1176xxxxx:MIMXR</SPAN><SPAN>T1170</SPAN><SPAN>-EVKB load /Users/melker/CodeProjects/AudioBox/code/code_primary_core/armgcc/flexspi_nor_debug/freertos_message_buffers_primary_core.elf</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T01:03:23.784</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN> <SPAN>INFO</SPAN><SPAN>: Exact match for MIMXRT1176xxxxx:MIMXR</SPAN><SPAN>T1170</SPAN><SPAN>-EVKB found</SPAN></DIV><DIV><SPAN>INFO</SPAN><SPAN>: Selected device MIMXRT1176xxxxx:MIMXR</SPAN><SPAN>T1170</SPAN><SPAN>-EVKB</SPAN></DIV><DIV><SPAN>INFO</SPAN><SPAN>: Getting available probes</SPAN></DIV><DIV><SPAN>INFO</SPAN><SPAN>: Selecting probe by serial substring</SPAN></DIV><DIV><SPAN>INFO</SPAN><SPAN>: Selected probe #</SPAN><SPAN>1</SPAN><SPAN> H3RHID4AC30FD (MCU-LINK on-board (r0E2) CMSIS-DAP </SPAN><SPAN>V3.160</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>INFO</SPAN><SPAN>: MCU-Link firmware update `check`: Probe ([H3RHID4AC30FD] [MCU-LINK on-board (r0E2) CMSIS-DAP </SPAN><SPAN>V3.160</SPAN><SPAN>]) is already running the same firmware version as the included firmware version [</SPAN><SPAN>3</SPAN><SPAN>.</SPAN><SPAN>160</SPAN><SPAN>]</SPAN></DIV><BR /><DIV><SPAN>[</SPAN><SPAN>2025-09-18T01:03:23.784</SPAN><SPAN>] [LinkServer] </SPAN><SPAN>[info]</SPAN><SPAN> LinkServer flash operation completed successfully:</SPAN></DIV><DIV><SPAN>Firmware update `check`: not required - forced update can be performed using: `./LinkServer probe #</SPAN><SPAN>1</SPAN><SPAN> update forced`</SPAN></DIV><DIV><SPAN>Ns: LinkServer RedlinkMulti Driver </SPAN><SPAN>v25.7</SPAN><SPAN> (Jul </SPAN><SPAN>21</SPAN> <SPAN>2025</SPAN> <SPAN>20:37:00</SPAN><SPAN> - crt_emu_cm_redlink build </SPAN><SPAN>1038</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Pc: ( </SPAN><SPAN>0</SPAN><SPAN>) Reading remote configuration</SPAN></DIV><DIV><SPAN>Wc(</SPAN><SPAN>03</SPAN><SPAN>). No cache support.</SPAN></DIV><DIV><SPAN>Nc: Found generic directory XML file in /var/folders/8x/1csc34zn7pq1_ksyf9k3x24h0000gn/T/tmpci6yg1l_/crt_directory.xml</SPAN></DIV><DIV><SPAN>Pc: ( </SPAN><SPAN>5</SPAN><SPAN>) Remote configuration complete</SPAN></DIV><DIV><SPAN>Nc: Reconnected to existing LinkServer process.</SPAN></DIV><DIV><SPAN>Wc: ============= SCRIPT: </SPAN><SPAN>RT1170_connect_M7_wake_M4.scp</SPAN><SPAN> =============</SPAN></DIV><DIV><SPAN>Wc: R</SPAN><SPAN>T1170</SPAN><SPAN> Connect M7 and Wake M4 Script</SPAN></DIV><DIV><SPAN>Wc: DpID = 6BA02477</SPAN></DIV><DIV><SPAN>Wc: APID = </SPAN><SPAN>0x84770001</SPAN></DIV><DIV><SPAN>Wc: Setting M4 spin code</SPAN></DIV><DIV><SPAN>Wc: Setting M4 clock</SPAN></DIV><DIV><SPAN>Wc: Resetting M4 core</SPAN></DIV><DIV><SPAN>Wc: Releasing M4</SPAN></DIV><DIV><SPAN>Wc: View cores on the DAP AP</SPAN></DIV><DIV><SPAN>Wc: DpID = 6BA02477</SPAN></DIV><DIV><SPAN>Wc: TAP </SPAN><SPAN>0</SPAN><SPAN>: 6BA02477 Core </SPAN><SPAN>0</SPAN><SPAN>: M7 APID: </SPAN><SPAN>84770001</SPAN><SPAN> ROM Table: E00FD003*</SPAN></DIV><DIV><SPAN>Wc: TAP </SPAN><SPAN>0</SPAN><SPAN>: 6BA02477 Core </SPAN><SPAN>1</SPAN><SPAN>: M4 APID: </SPAN><SPAN>24770011</SPAN><SPAN> ROM Table: E00FF003</SPAN></DIV><DIV><SPAN>Wc: ============= END SCRIPT ========================================</SPAN></DIV><DIV><SPAN>Nc: Probe Firmware: MCU-LINK on-board (r0E2) CMSIS-DAP </SPAN><SPAN>V3.160</SPAN><SPAN> (NXP Semiconductors)</SPAN></DIV><DIV><SPAN>Nc: Serial Number: H3RHID4AC30FD</SPAN></DIV><DIV><SPAN>Nc: VID:PID: </SPAN><SPAN>1FC9:0143</SPAN></DIV><DIV><SPAN>Nc: USB Path: </SPAN><SPAN>0014:0002:00</SPAN></DIV><DIV><SPAN>Nc: Using memory from core </SPAN><SPAN>0</SPAN><SPAN> after searching for a good core</SPAN></DIV><DIV><SPAN>Pc: ( </SPAN><SPAN>30</SPAN><SPAN>) Emulator Connected</SPAN></DIV><DIV><SPAN>Pc: ( </SPAN><SPAN>40</SPAN><SPAN>) </SPAN><SPAN>Debug</SPAN><SPAN> Halt</SPAN></DIV><DIV><SPAN>Pc: ( </SPAN><SPAN>50</SPAN><SPAN>) CPU ID</SPAN></DIV><DIV><SPAN>Nc: debug interface type = CoreSight DP (DAP DP ID 6BA02477) over SWD TAP </SPAN><SPAN>0</SPAN></DIV><DIV><SPAN>Nc: processor type = Cortex-M7 (CPU ID 00000C27) on DAP AP </SPAN><SPAN>0</SPAN></DIV><DIV><SPAN>Nc: number of h/w breakpoints = </SPAN><SPAN>8</SPAN></DIV><DIV><SPAN>Nc: number of flash patches = </SPAN><SPAN>0</SPAN></DIV><DIV><SPAN>Nc: number of h/w watchpoints = </SPAN><SPAN>4</SPAN></DIV><DIV><SPAN>Nc: Probe(</SPAN><SPAN>0</SPAN><SPAN><LI-EMOJI id="lia_disappointed-face" title=":disappointed_face:"></LI-EMOJI> Connected&amp;Reset. DpID: 6BA02477. CpuID: 00000C27. </SPAN><SPAN>Info</SPAN><SPAN>: &lt;None&gt;</SPAN></DIV><DIV><SPAN>Nc: </SPAN><SPAN>Debug</SPAN><SPAN> protocol: SWD. RTCK: Disabled. Vector catch: Disabled.</SPAN></DIV><DIV><SPAN>Ns: Content of CoreSight </SPAN><SPAN>Debug</SPAN><SPAN> ROM(s):</SPAN></DIV><DIV><SPAN>Nc: RBASE E00FD000: CID B105100D PID </SPAN><SPAN>000008E88C</SPAN><SPAN> ROM (type </SPAN><SPAN>0x1</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>1</SPAN><SPAN> E00FE000: CID B105100D PID </SPAN><SPAN>04000BB4C8</SPAN><SPAN> ROM (type </SPAN><SPAN>0x1</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>2</SPAN><SPAN> E00FF000: CID B105100D PID </SPAN><SPAN>04000BB4C7</SPAN><SPAN> ROM (type </SPAN><SPAN>0x1</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>3</SPAN><SPAN> E000E000: CID B105E00D PID </SPAN><SPAN>04000BB00C</SPAN><SPAN> Gen SCS (type </SPAN><SPAN>0x0</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>3</SPAN><SPAN> E0001000: CID B105E00D PID </SPAN><SPAN>04000BB002</SPAN><SPAN> Gen DWT (type </SPAN><SPAN>0x0</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>3</SPAN><SPAN> E0002000: CID B105E00D PID </SPAN><SPAN>04000BB00E</SPAN><SPAN> Gen (type </SPAN><SPAN>0x0</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>3</SPAN><SPAN> E0000000: CID B105E00D PID </SPAN><SPAN>04000BB001</SPAN><SPAN> Gen ITM (type </SPAN><SPAN>0x0</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>2</SPAN><SPAN> E0041000: CID B105900D PID </SPAN><SPAN>04001BB975</SPAN><SPAN> CSt ARM </SPAN><SPAN>ETMv4.0</SPAN><SPAN> type </SPAN><SPAN>0x13</SPAN><SPAN> Trace Source - Core</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>2</SPAN><SPAN> E0042000: CID B105900D PID </SPAN><SPAN>04004BB906</SPAN><SPAN> CSt type </SPAN><SPAN>0x14</SPAN> <SPAN>Debug</SPAN><SPAN> Control - Trigger, </SPAN><SPAN>e.g</SPAN><SPAN>. ECT</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>1</SPAN><SPAN> E0043000: CID B105900D PID </SPAN><SPAN>04001BB908</SPAN><SPAN> CSt CSTF type </SPAN><SPAN>0x12</SPAN><SPAN> Trace Link - Trace funnel/router</SPAN></DIV><DIV><SPAN>Nc: NXP: MIMXRT1176xxxxx</SPAN></DIV><DIV><SPAN>Nc: DAP stride is </SPAN><SPAN>1024</SPAN><SPAN> bytes (</SPAN><SPAN>256</SPAN><SPAN> words)</SPAN></DIV><DIV><SPAN>Nc: Inspected </SPAN><SPAN>v.2</SPAN><SPAN> External Flash Device on SPI using SFDP JEDEC ID </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN></DIV><DIV><SPAN>Nc: Image </SPAN><SPAN>'iMXRT1170_SFDP_FlexSPI1_A_QSPI Jul 21 2025 18:35:07'</SPAN></DIV><DIV><SPAN>Nc: Opening flash driver </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN></DIV><DIV><SPAN>Nc: Sending VECTRESET to run flash driver</SPAN></DIV><DIV><SPAN>Nc: Flash variant </SPAN><SPAN>'iMXRT1170_SFDP_FlexSPI1_A_QSPI Jul 21 2025 18:35:07'</SPAN><SPAN> detected (64MB = </SPAN><SPAN>1024</SPAN><SPAN>*64K at </SPAN><SPAN>0x30000000</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: Closing flash driver </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN></DIV><DIV><SPAN>Pc: ( </SPAN><SPAN>65</SPAN><SPAN>) Chip Setup Complete</SPAN></DIV><DIV><SPAN>Pc: ( </SPAN><SPAN>70</SPAN><SPAN>) License Check Complete</SPAN></DIV><DIV><SPAN>Nt: Loading </SPAN><SPAN>'freertos_message_buffers_primary_core.elf'</SPAN><SPAN> ELF </SPAN><SPAN>0x30000400</SPAN><SPAN> len </SPAN><SPAN>0x200</SPAN></DIV><DIV><SPAN>Nc: Opening flash driver </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN><SPAN> (already resident)</SPAN></DIV><DIV><SPAN>Nc: Sending VECTRESET to run flash driver</SPAN></DIV><DIV><SPAN>Nc: Flash variant </SPAN><SPAN>'iMXRT1170_SFDP_FlexSPI1_A_QSPI Jul 21 2025 18:35:07'</SPAN><SPAN> detected (64MB = </SPAN><SPAN>1024</SPAN><SPAN>*64K at </SPAN><SPAN>0x30000000</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Pb: </SPAN><SPAN>1</SPAN><SPAN> of </SPAN><SPAN>1</SPAN><SPAN> ( </SPAN><SPAN>0</SPAN><SPAN>) Writing sectors </SPAN><SPAN>0</SPAN><SPAN>-</SPAN><SPAN>0</SPAN><SPAN> at </SPAN><SPAN>0x30000400</SPAN><SPAN> with </SPAN><SPAN>512</SPAN><SPAN> bytes</SPAN></DIV><DIV><SPAN>Ps: ( </SPAN><SPAN>0</SPAN><SPAN>) at </SPAN><SPAN>30000000</SPAN><SPAN>: </SPAN><SPAN>0</SPAN><SPAN> bytes - </SPAN><SPAN>0</SPAN><SPAN>/</SPAN><SPAN>1536</SPAN></DIV><DIV><SPAN>Ps: (</SPAN><SPAN>100</SPAN><SPAN>) at </SPAN><SPAN>30000000</SPAN><SPAN>: </SPAN><SPAN>16384</SPAN><SPAN> bytes - </SPAN><SPAN>16384</SPAN><SPAN>/</SPAN><SPAN>1536</SPAN></DIV><DIV><SPAN>Nc: </SPAN><SPAN>30004000</SPAN><SPAN> done </SPAN><SPAN>100</SPAN><SPAN>% (</SPAN><SPAN>16384</SPAN><SPAN> out of </SPAN><SPAN>1536</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: Sectors written: </SPAN><SPAN>1</SPAN><SPAN>, unchanged: </SPAN><SPAN>0</SPAN><SPAN>, total: </SPAN><SPAN>1</SPAN></DIV><DIV><SPAN>Nc: Closing flash driver </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN></DIV><DIV><SPAN>Pb: (</SPAN><SPAN>100</SPAN><SPAN>) Finished writing Flash successfully.</SPAN></DIV><DIV><SPAN>Nt: Loaded </SPAN><SPAN>0x200</SPAN><SPAN> bytes in 295ms (about 1kB/s)</SPAN></DIV><DIV><SPAN>Nt: Loading </SPAN><SPAN>'freertos_message_buffers_primary_core.elf'</SPAN><SPAN> ELF </SPAN><SPAN>0x30001000</SPAN><SPAN> len </SPAN><SPAN>0x30</SPAN></DIV><DIV><SPAN>Nc: Opening flash driver </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN><SPAN> (already resident)</SPAN></DIV><DIV><SPAN>Nc: Sending VECTRESET to run flash driver</SPAN></DIV><DIV><SPAN>Nc: Flash variant </SPAN><SPAN>'iMXRT1170_SFDP_FlexSPI1_A_QSPI Jul 21 2025 18:35:07'</SPAN><SPAN> detected (64MB = </SPAN><SPAN>1024</SPAN><SPAN>*64K at </SPAN><SPAN>0x30000000</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Pb: </SPAN><SPAN>1</SPAN><SPAN> of </SPAN><SPAN>1</SPAN><SPAN> ( </SPAN><SPAN>0</SPAN><SPAN>) Writing sectors </SPAN><SPAN>0</SPAN><SPAN>-</SPAN><SPAN>0</SPAN><SPAN> at </SPAN><SPAN>0x30001000</SPAN><SPAN> with </SPAN><SPAN>48</SPAN><SPAN> bytes</SPAN></DIV><DIV><SPAN>Ps: ( </SPAN><SPAN>0</SPAN><SPAN>) at </SPAN><SPAN>30000000</SPAN><SPAN>: </SPAN><SPAN>0</SPAN><SPAN> bytes - </SPAN><SPAN>0</SPAN><SPAN>/</SPAN><SPAN>4144</SPAN></DIV><DIV><SPAN>Ps: (</SPAN><SPAN>100</SPAN><SPAN>) at </SPAN><SPAN>30000000</SPAN><SPAN>: </SPAN><SPAN>16384</SPAN><SPAN> bytes - </SPAN><SPAN>16384</SPAN><SPAN>/</SPAN><SPAN>4144</SPAN></DIV><DIV><SPAN>Nc: </SPAN><SPAN>30004000</SPAN><SPAN> done </SPAN><SPAN>100</SPAN><SPAN>% (</SPAN><SPAN>16384</SPAN><SPAN> out of </SPAN><SPAN>4144</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: Sectors written: </SPAN><SPAN>1</SPAN><SPAN>, unchanged: </SPAN><SPAN>0</SPAN><SPAN>, total: </SPAN><SPAN>1</SPAN></DIV><DIV><SPAN>Nc: Closing flash driver </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN></DIV><DIV><SPAN>Pb: (</SPAN><SPAN>100</SPAN><SPAN>) Finished writing Flash successfully.</SPAN></DIV><DIV><SPAN>Nt: Loaded </SPAN><SPAN>0x30</SPAN><SPAN> bytes in 310ms (about 0kB/s)</SPAN></DIV><DIV><SPAN>Nt: Loading </SPAN><SPAN>'freertos_message_buffers_primary_core.elf'</SPAN><SPAN> ELF </SPAN><SPAN>0x30002000</SPAN><SPAN> len </SPAN><SPAN>0x12044</SPAN></DIV><DIV><SPAN>Nc: Opening flash driver </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN><SPAN> (already resident)</SPAN></DIV><DIV><SPAN>Nc: Sending VECTRESET to run flash driver</SPAN></DIV><DIV><SPAN>Nc: Flash variant </SPAN><SPAN>'iMXRT1170_SFDP_FlexSPI1_A_QSPI Jul 21 2025 18:35:07'</SPAN><SPAN> detected (64MB = </SPAN><SPAN>1024</SPAN><SPAN>*64K at </SPAN><SPAN>0x30000000</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Pb: </SPAN><SPAN>1</SPAN><SPAN> of </SPAN><SPAN>1</SPAN><SPAN> ( </SPAN><SPAN>0</SPAN><SPAN>) Writing sectors </SPAN><SPAN>0</SPAN><SPAN>-</SPAN><SPAN>1</SPAN><SPAN> at </SPAN><SPAN>0x30002000</SPAN><SPAN> with </SPAN><SPAN>73796</SPAN><SPAN> bytes</SPAN></DIV><DIV><SPAN>Ps: ( </SPAN><SPAN>0</SPAN><SPAN>) at </SPAN><SPAN>30000000</SPAN><SPAN>: </SPAN><SPAN>0</SPAN><SPAN> bytes - </SPAN><SPAN>0</SPAN><SPAN>/</SPAN><SPAN>81988</SPAN></DIV><DIV><SPAN>Ps: ( </SPAN><SPAN>19</SPAN><SPAN>) at </SPAN><SPAN>30000000</SPAN><SPAN>: </SPAN><SPAN>16384</SPAN><SPAN> bytes - </SPAN><SPAN>16384</SPAN><SPAN>/</SPAN><SPAN>81988</SPAN></DIV><DIV><SPAN>Nc: </SPAN><SPAN>30004000</SPAN><SPAN> done </SPAN><SPAN>19</SPAN><SPAN>% (</SPAN><SPAN>16384</SPAN><SPAN> out of </SPAN><SPAN>81988</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Ps: ( </SPAN><SPAN>39</SPAN><SPAN>) at </SPAN><SPAN>30004000</SPAN><SPAN>: </SPAN><SPAN>16384</SPAN><SPAN> bytes - </SPAN><SPAN>32768</SPAN><SPAN>/</SPAN><SPAN>81988</SPAN></DIV><DIV><SPAN>Nc: </SPAN><SPAN>30008000</SPAN><SPAN> done </SPAN><SPAN>39</SPAN><SPAN>% (</SPAN><SPAN>32768</SPAN><SPAN> out of </SPAN><SPAN>81988</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Ps: ( </SPAN><SPAN>59</SPAN><SPAN>) at </SPAN><SPAN>30008000</SPAN><SPAN>: </SPAN><SPAN>16384</SPAN><SPAN> bytes - </SPAN><SPAN>49152</SPAN><SPAN>/</SPAN><SPAN>81988</SPAN></DIV><DIV><SPAN>Nc: 3000C000 done </SPAN><SPAN>59</SPAN><SPAN>% (</SPAN><SPAN>49152</SPAN><SPAN> out of </SPAN><SPAN>81988</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Ps: ( </SPAN><SPAN>79</SPAN><SPAN>) at 3000C000: </SPAN><SPAN>16384</SPAN><SPAN> bytes - </SPAN><SPAN>65536</SPAN><SPAN>/</SPAN><SPAN>81988</SPAN></DIV><DIV><SPAN>Nc: </SPAN><SPAN>30010000</SPAN><SPAN> done </SPAN><SPAN>79</SPAN><SPAN>% (</SPAN><SPAN>65536</SPAN><SPAN> out of </SPAN><SPAN>81988</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Ps: (</SPAN><SPAN>100</SPAN><SPAN>) at </SPAN><SPAN>30010000</SPAN><SPAN>: </SPAN><SPAN>65536</SPAN><SPAN> bytes - </SPAN><SPAN>131072</SPAN><SPAN>/</SPAN><SPAN>81988</SPAN></DIV><DIV><SPAN>Nc: Sectors written: </SPAN><SPAN>1</SPAN><SPAN>, unchanged: </SPAN><SPAN>1</SPAN><SPAN>, total: </SPAN><SPAN>2</SPAN></DIV><DIV><SPAN>Nc: Closing flash driver </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN></DIV><DIV><SPAN>Pb: (</SPAN><SPAN>100</SPAN><SPAN>) Finished writing Flash successfully.</SPAN></DIV><DIV><SPAN>Nt: Loaded </SPAN><SPAN>0x12044</SPAN><SPAN> bytes in 499ms (about 147kB/s)</SPAN></DIV><DIV><SPAN>Nt: Loading </SPAN><SPAN>'freertos_message_buffers_primary_core.elf'</SPAN><SPAN> ELF </SPAN><SPAN>0x33FC0000</SPAN><SPAN> len </SPAN><SPAN>0x7144</SPAN></DIV><DIV><SPAN>Nc: Opening flash driver </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN><SPAN> (already resident)</SPAN></DIV><DIV><SPAN>Nc: Sending VECTRESET to run flash driver</SPAN></DIV><DIV><SPAN>Nc: Flash variant </SPAN><SPAN>'iMXRT1170_SFDP_FlexSPI1_A_QSPI Jul 21 2025 18:35:07'</SPAN><SPAN> detected (64MB = </SPAN><SPAN>1024</SPAN><SPAN>*64K at </SPAN><SPAN>0x30000000</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Pb: </SPAN><SPAN>1</SPAN><SPAN> of </SPAN><SPAN>1</SPAN><SPAN> ( </SPAN><SPAN>0</SPAN><SPAN>) Writing sectors </SPAN><SPAN>1020-1020</SPAN><SPAN> at </SPAN><SPAN>0x33FC0000</SPAN><SPAN> with </SPAN><SPAN>28996</SPAN><SPAN> bytes</SPAN></DIV><DIV><SPAN>Ps: ( </SPAN><SPAN>0</SPAN><SPAN>) at 33FC0000: </SPAN><SPAN>0</SPAN><SPAN> bytes - </SPAN><SPAN>0</SPAN><SPAN>/</SPAN><SPAN>28996</SPAN></DIV><DIV><SPAN>Ps: ( </SPAN><SPAN>56</SPAN><SPAN>) at 33FC0000: </SPAN><SPAN>16384</SPAN><SPAN> bytes - </SPAN><SPAN>16384</SPAN><SPAN>/</SPAN><SPAN>28996</SPAN></DIV><DIV><SPAN>Nc: 33FC4000 done </SPAN><SPAN>56</SPAN><SPAN>% (</SPAN><SPAN>16384</SPAN><SPAN> out of </SPAN><SPAN>28996</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Ps: (</SPAN><SPAN>100</SPAN><SPAN>) at 33FC4000: </SPAN><SPAN>16384</SPAN><SPAN> bytes - </SPAN><SPAN>32768</SPAN><SPAN>/</SPAN><SPAN>28996</SPAN></DIV><DIV><SPAN>Nc: 33FC8000 done </SPAN><SPAN>100</SPAN><SPAN>% (</SPAN><SPAN>32768</SPAN><SPAN> out of </SPAN><SPAN>28996</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: Sectors written: </SPAN><SPAN>1</SPAN><SPAN>, unchanged: </SPAN><SPAN>0</SPAN><SPAN>, total: </SPAN><SPAN>1</SPAN></DIV><DIV><SPAN>Nc: Closing flash driver </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN></DIV><DIV><SPAN>Pb: (</SPAN><SPAN>100</SPAN><SPAN>) Finished writing Flash successfully.</SPAN></DIV><DIV><SPAN>Nt: Loaded </SPAN><SPAN>0x7144</SPAN><SPAN> bytes in 550ms (about 52kB/s)</SPAN></DIV><DIV><SPAN>Nt: Reset target (system)</SPAN></DIV><DIV><SPAN>Wc: ============= SCRIPT: </SPAN><SPAN>RT1170_reset.scp</SPAN><SPAN> =============</SPAN></DIV><DIV><SPAN>Wc: This probe = </SPAN><SPAN>1</SPAN></DIV><DIV><SPAN>Wc: This TAP = </SPAN><SPAN>0</SPAN></DIV><DIV><SPAN>Wc: This core = </SPAN><SPAN>0</SPAN></DIV><DIV><SPAN>Wc: SYSTEM Reset</SPAN></DIV><DIV><SPAN>Wc: Wirespeed = </SPAN><SPAN>10000000</SPAN><SPAN> Hz</SPAN></DIV><DIV><SPAN>Wc: DpID = 6BA02477</SPAN></DIV><DIV><SPAN>Wc: TAP </SPAN><SPAN>0</SPAN><SPAN>: 6BA02477 Core </SPAN><SPAN>0</SPAN><SPAN>: M7 APID: </SPAN><SPAN>84770001</SPAN><SPAN> ROM Table: E00FD003*</SPAN></DIV><DIV><SPAN>Wc: TAP </SPAN><SPAN>0</SPAN><SPAN>: 6BA02477 AP </SPAN><SPAN>1</SPAN><SPAN>: APID: </SPAN><SPAN>24770011</SPAN><SPAN> ROM Table: E00FF003</SPAN></DIV><DIV><SPAN>Wc: TAP </SPAN><SPAN>0</SPAN><SPAN>: 6BA02477 AP </SPAN><SPAN>2</SPAN><SPAN>: APID: </SPAN><SPAN>54770002</SPAN><SPAN> ROM Table: </SPAN><SPAN>00000002</SPAN></DIV><DIV><SPAN>Wc: APID = </SPAN><SPAN>0x84770001</SPAN></DIV><DIV><SPAN>Wc: Setting M4 spin code</SPAN></DIV><DIV><SPAN>Wc: Setting M4 clock</SPAN></DIV><DIV><SPAN>Wc: Resetting M4 core</SPAN></DIV><DIV><SPAN>Wc: Releasing M4</SPAN></DIV><DIV><SPAN>Wc: View cores on the DAP AP</SPAN></DIV><DIV><SPAN>Wc: DpID = 6BA02477</SPAN></DIV><DIV><SPAN>Wc: TAP </SPAN><SPAN>0</SPAN><SPAN>: 6BA02477 Core </SPAN><SPAN>0</SPAN><SPAN>: M7 APID: </SPAN><SPAN>84770001</SPAN><SPAN> ROM Table: E00FD003*</SPAN></DIV><DIV><SPAN>Wc: TAP </SPAN><SPAN>0</SPAN><SPAN>: 6BA02477 Core </SPAN><SPAN>1</SPAN><SPAN>: M4 APID: </SPAN><SPAN>24770011</SPAN><SPAN> ROM Table: E00FF003</SPAN></DIV><DIV><SPAN>Wc: R15 = </SPAN><SPAN>0x00223104</SPAN></DIV><DIV><SPAN>Wc: Vector table SP/PC is the reset context.</SPAN></DIV><DIV><SPAN>Wc: PC = </SPAN><SPAN>0x3000247D</SPAN></DIV><DIV><SPAN>Wc: SP = </SPAN><SPAN>0x20040000</SPAN></DIV><DIV><SPAN>Wc: XPSR = </SPAN><SPAN>0x01000000</SPAN></DIV><DIV><SPAN>Wc: VTOR = </SPAN><SPAN>0x30002000</SPAN></DIV><DIV><SPAN>Wc: Set DEMCR = </SPAN><SPAN>0x010007F1</SPAN></DIV><DIV><SPAN>Wc: ============= END SCRIPT ===========================</SPAN></DIV><DIV><SPAN>Ns: Stopped: Halt</SPAN></DIV><DIV><SPAN>Ns: restart on reset</SPAN></DIV><BR /><BR /><BR /><BR /><BR /></DIV></DIV></DIV><P>&nbsp;</P> Wed, 17 Sep 2025 23:10:23 GMT cyberhelmer 2025-09-17T23:10:23Z RT1170 EVKB Multicore project and LinkServer Flash programmer not working (mcuxpresso vs code) https://community.nxp.com/t5/i-MX-RT-Crossover-MCUs/RT1170-EVKB-Multicore-project-and-LinkServer-Flash-programmer/m-p/2171441#M35216 <DIV><DIV><SPAN>I have a project based on the freeRTOS multicore message buffers example from nxp SDK.&nbsp;<BR />There seem to be a problem with the LinkServer Flash Programmer in the mcuxpresso for vs code extension.<BR /><BR />I am sometimes able to flash the m7 firmware which loads the M4 to the correct ocram adress. Very often the flash programmer fails and the board stops running it's code.&nbsp;<BR /><BR />What is the cause of this and how can I fix it so that I'm always able to flash the m7 correctly?&nbsp;<BR /><BR />Thanks!<BR /><BR /><STRONG>Log when failing:&nbsp;</STRONG><BR /><BR />[</SPAN><SPAN>2025-09-18T00:58:40.377</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Users/melker/.mcuxpressotools/pemicrogdbserver/pegdbserver_console -showhardware</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T00:58:40.379</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Applications/LinkServer_25.</SPAN><SPAN>7</SPAN><SPAN>.</SPAN><SPAN>33</SPAN><SPAN>/LinkServer probes --json</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T00:58:40.380</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Applications/SEGGER/JLink_V824/JLinkGDBServerCLExe -listprobes USB</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T00:58:41.772</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Users/melker/.mcuxpressotools/pemicrogdbserver/pegdbserver_console -showhardware</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T00:58:41.773</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Applications/SEGGER/JLink_V824/JLinkGDBServerCLExe -listprobes USB</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T00:58:41.773</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Applications/LinkServer_25.</SPAN><SPAN>7</SPAN><SPAN>.</SPAN><SPAN>33</SPAN><SPAN>/LinkServer probes --json</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T00:58:44.950</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Applications/LinkServer_25.</SPAN><SPAN>7</SPAN><SPAN>.</SPAN><SPAN>33</SPAN><SPAN>/LinkServer flash --probe H3RHID4AC30FD --no-boot MIMXRT1176xxxxx:MIMXR</SPAN><SPAN>T1170</SPAN><SPAN>-EVKB load /Users/melker/CodeProjects/AudioBox/code/code_primary_core/armgcc/flexspi_nor_debug/freertos_message_buffers_primary_core.elf</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T00:58:48.405</SPAN><SPAN>] [proc] </SPAN><SPAN>[error]</SPAN><SPAN> /Applications/LinkServer_25.</SPAN><SPAN>7</SPAN><SPAN>.</SPAN><SPAN>33</SPAN><SPAN>/LinkServer exited with code </SPAN><SPAN>255</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T00:58:48.405</SPAN><SPAN>] [proc] </SPAN><SPAN>[error]</SPAN><SPAN> Firmware update `check`: not required - forced update can be performed using: `./LinkServer probe #</SPAN><SPAN>1</SPAN><SPAN> update forced`</SPAN></DIV><DIV><SPAN>Ns: LinkServer RedlinkMulti Driver </SPAN><SPAN>v25.7</SPAN><SPAN> (Jul </SPAN><SPAN>21</SPAN> <SPAN>2025</SPAN> <SPAN>20:37:00</SPAN><SPAN> - crt_emu_cm_redlink build </SPAN><SPAN>1038</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Pc: ( </SPAN><SPAN>0</SPAN><SPAN>) Reading remote configuration</SPAN></DIV><DIV><SPAN>Wc(</SPAN><SPAN>03</SPAN><SPAN>). No cache support.</SPAN></DIV><DIV><SPAN>Nc: Found generic directory XML file in /var/folders/8x/1csc34zn7pq1_ksyf9k3x24h0000gn/T/tmp3tmcfgxp/crt_directory.xml</SPAN></DIV><DIV><SPAN>Pc: ( </SPAN><SPAN>5</SPAN><SPAN>) Remote configuration complete</SPAN></DIV><DIV><SPAN>Nc: Reconnected to existing LinkServer process.</SPAN></DIV><DIV><SPAN>Wc: ============= SCRIPT: </SPAN><SPAN>RT1170_connect_M7_wake_M4.scp</SPAN><SPAN> =============</SPAN></DIV><DIV><SPAN>Wc: R</SPAN><SPAN>T1170</SPAN><SPAN> Connect M7 and Wake M4 Script</SPAN></DIV><DIV><SPAN>Wc: DpID = 6BA02477</SPAN></DIV><DIV><SPAN>Wc: APID = </SPAN><SPAN>0x84770001</SPAN></DIV><DIV><SPAN>Wc: Setting M4 spin code</SPAN></DIV><DIV><SPAN>Wc: Setting M4 clock</SPAN></DIV><DIV><SPAN>Wc: Resetting M4 core</SPAN></DIV><DIV><SPAN>Wc: View cores on the DAP AP</SPAN></DIV><DIV><SPAN>Wc: DpID = 6BA02477</SPAN></DIV><DIV><SPAN>Wc: TAP </SPAN><SPAN>0</SPAN><SPAN>: 6BA02477 Core </SPAN><SPAN>0</SPAN><SPAN>: M7 APID: </SPAN><SPAN>84770001</SPAN><SPAN> ROM Table: E00FD003*</SPAN></DIV><DIV><SPAN>Wc: TAP </SPAN><SPAN>0</SPAN><SPAN>: 6BA02477 Core </SPAN><SPAN>1</SPAN><SPAN>: M4 APID: </SPAN><SPAN>24770011</SPAN><SPAN> ROM Table: E00FF003</SPAN></DIV><DIV><SPAN>Wc: ============= END SCRIPT ========================================</SPAN></DIV><DIV><SPAN>Nc: Probe Firmware: MCU-LINK on-board (r0E2) CMSIS-DAP </SPAN><SPAN>V3.160</SPAN><SPAN> (NXP Semiconductors)</SPAN></DIV><DIV><SPAN>Nc: Serial Number: H3RHID4AC30FD</SPAN></DIV><DIV><SPAN>Nc: VID:PID: </SPAN><SPAN>1FC9:0143</SPAN></DIV><DIV><SPAN>Nc: USB Path: </SPAN><SPAN>0014:0002:00</SPAN></DIV><DIV><SPAN>Nc: Using memory from core </SPAN><SPAN>0</SPAN><SPAN> after searching for a good core</SPAN></DIV><DIV><SPAN>Pc: ( </SPAN><SPAN>30</SPAN><SPAN>) Emulator Connected</SPAN></DIV><DIV><SPAN>Pc: ( </SPAN><SPAN>40</SPAN><SPAN>) </SPAN><SPAN>Debug</SPAN><SPAN> Halt</SPAN></DIV><DIV><SPAN>Pc: ( </SPAN><SPAN>50</SPAN><SPAN>) CPU ID</SPAN></DIV><DIV><SPAN>Nc: debug interface type = CoreSight DP (DAP DP ID 6BA02477) over SWD TAP </SPAN><SPAN>0</SPAN></DIV><DIV><SPAN>Nc: processor type = Cortex-M7 (CPU ID 00000C27) on DAP AP </SPAN><SPAN>0</SPAN></DIV><DIV><SPAN>Nc: number of h/w breakpoints = </SPAN><SPAN>8</SPAN></DIV><DIV><SPAN>Nc: number of flash patches = </SPAN><SPAN>0</SPAN></DIV><DIV><SPAN>Nc: number of h/w watchpoints = </SPAN><SPAN>4</SPAN></DIV><DIV><SPAN>Nc: Probe(</SPAN><SPAN>0</SPAN><SPAN><LI-EMOJI id="lia_disappointed-face" title=":disappointed_face:"></LI-EMOJI> Connected&amp;Reset. DpID: 6BA02477. CpuID: 00000C27. </SPAN><SPAN>Info</SPAN><SPAN>: &lt;None&gt;</SPAN></DIV><DIV><SPAN>Nc: </SPAN><SPAN>Debug</SPAN><SPAN> protocol: SWD. RTCK: Disabled. Vector catch: Disabled.</SPAN></DIV><DIV><SPAN>Ns: Content of CoreSight </SPAN><SPAN>Debug</SPAN><SPAN> ROM(s):</SPAN></DIV><DIV><SPAN>Nc: RBASE E00FD000: CID B105100D PID </SPAN><SPAN>000008E88C</SPAN><SPAN> ROM (type </SPAN><SPAN>0x1</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>1</SPAN><SPAN> E00FE000: CID B105100D PID </SPAN><SPAN>04000BB4C8</SPAN><SPAN> ROM (type </SPAN><SPAN>0x1</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>2</SPAN><SPAN> E00FF000: CID B105100D PID </SPAN><SPAN>04000BB4C7</SPAN><SPAN> ROM (type </SPAN><SPAN>0x1</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>3</SPAN><SPAN> E000E000: CID B105E00D PID </SPAN><SPAN>04000BB00C</SPAN><SPAN> Gen SCS (type </SPAN><SPAN>0x0</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>3</SPAN><SPAN> E0001000: CID B105E00D PID </SPAN><SPAN>04000BB002</SPAN><SPAN> Gen DWT (type </SPAN><SPAN>0x0</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>3</SPAN><SPAN> E0002000: CID B105E00D PID </SPAN><SPAN>04000BB00E</SPAN><SPAN> Gen (type </SPAN><SPAN>0x0</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>3</SPAN><SPAN> E0000000: CID B105E00D PID </SPAN><SPAN>04000BB001</SPAN><SPAN> Gen ITM (type </SPAN><SPAN>0x0</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>2</SPAN><SPAN> E0041000: CID B105900D PID </SPAN><SPAN>04001BB975</SPAN><SPAN> CSt ARM </SPAN><SPAN>ETMv4.0</SPAN><SPAN> type </SPAN><SPAN>0x13</SPAN><SPAN> Trace Source - Core</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>2</SPAN><SPAN> E0042000: CID B105900D PID </SPAN><SPAN>04004BB906</SPAN><SPAN> CSt type </SPAN><SPAN>0x14</SPAN> <SPAN>Debug</SPAN><SPAN> Control - Trigger, </SPAN><SPAN>e.g</SPAN><SPAN>. ECT</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>1</SPAN><SPAN> E0043000: CID B105900D PID </SPAN><SPAN>04001BB908</SPAN><SPAN> CSt CSTF type </SPAN><SPAN>0x12</SPAN><SPAN> Trace Link - Trace funnel/router</SPAN></DIV><DIV><SPAN>Nc: NXP: MIMXRT1176xxxxx</SPAN></DIV><DIV><SPAN>Nc: DAP stride is </SPAN><SPAN>1024</SPAN><SPAN> bytes (</SPAN><SPAN>256</SPAN><SPAN> words)</SPAN></DIV><DIV><SPAN>Nc: Inspected </SPAN><SPAN>v.2</SPAN><SPAN> External Flash Device on SPI using SFDP JEDEC ID </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN></DIV><DIV><SPAN>Nc: Image </SPAN><SPAN>'iMXRT1170_SFDP_FlexSPI1_A_QSPI Jul 21 2025 18:35:07'</SPAN></DIV><DIV><SPAN>Nc: Opening flash driver </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN></DIV><DIV><SPAN>Nc: Sending VECTRESET to run flash driver</SPAN></DIV><DIV><SPAN>Nc: Flash variant </SPAN><SPAN>'iMXRT1170_SFDP_FlexSPI1_A_QSPI Jul 21 2025 18:35:07'</SPAN><SPAN> detected (64MB = </SPAN><SPAN>1024</SPAN><SPAN>*64K at </SPAN><SPAN>0x30000000</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: Closing flash driver </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN></DIV><DIV><SPAN>Pc: ( </SPAN><SPAN>65</SPAN><SPAN>) Chip Setup Complete</SPAN></DIV><DIV><SPAN>Pc: ( </SPAN><SPAN>70</SPAN><SPAN>) License Check Complete</SPAN></DIV><DIV><SPAN>Nt: Loading </SPAN><SPAN>'freertos_message_buffers_primary_core.elf'</SPAN><SPAN> ELF </SPAN><SPAN>0x30000400</SPAN><SPAN> len </SPAN><SPAN>0x200</SPAN></DIV><DIV><SPAN>Nc: Opening flash driver </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN><SPAN> (already resident)</SPAN></DIV><DIV><SPAN>Nc: Sending VECTRESET to run flash driver</SPAN></DIV><DIV><SPAN>Nc: Warning - failed to start flash driver (at </SPAN><SPAN>0x2000009D</SPAN><SPAN>?) - rc Nn(</SPAN><SPAN>05</SPAN><SPAN>). Wire ACK Fault in DAP access</SPAN></DIV><DIV><SPAN>Nc: Flash Driver </SPAN><SPAN>V.2</SPAN><SPAN> startup failed - rc Nn(</SPAN><SPAN>05</SPAN><SPAN>). Wire ACK Fault in DAP access</SPAN></DIV><DIV><SPAN>Pb: (</SPAN><SPAN>100</SPAN><SPAN>) Writing Flash ended with an error.</SPAN></DIV><DIV><SPAN>Ed:05</SPAN><SPAN>: File </SPAN><SPAN>'freertos_message_buffers_primary_core.elf'</SPAN><SPAN> load failure: Nn(</SPAN><SPAN>05</SPAN><SPAN>). Wire ACK Fault in DAP access</SPAN></DIV><DIV><SPAN>Nt: Loading </SPAN><SPAN>'freertos_message_buffers_primary_core.elf'</SPAN><SPAN> ELF </SPAN><SPAN>0x30001000</SPAN><SPAN> len </SPAN><SPAN>0x30</SPAN></DIV><DIV><SPAN>Nc: Opening flash driver </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN></DIV><DIV><SPAN>Nc: request to clear DAP error failed - status </SPAN><SPAN>5</SPAN></DIV><DIV><SPAN>Pb: (</SPAN><SPAN>100</SPAN><SPAN>) Writing Flash ended with an error.</SPAN></DIV><DIV><SPAN>Ed:05</SPAN><SPAN>: File </SPAN><SPAN>'freertos_message_buffers_primary_core.elf'</SPAN><SPAN> load failure: Nn(</SPAN><SPAN>05</SPAN><SPAN>). Wire ACK Fault in DAP access</SPAN></DIV><DIV><SPAN>Nt: Loading </SPAN><SPAN>'freertos_message_buffers_primary_core.elf'</SPAN><SPAN> ELF </SPAN><SPAN>0x30002000</SPAN><SPAN> len </SPAN><SPAN>0x12044</SPAN></DIV><DIV><SPAN>Nc: Opening flash driver </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN></DIV><DIV><SPAN>Nc: request to clear DAP error failed - status </SPAN><SPAN>5</SPAN></DIV><DIV><SPAN>Pb: (</SPAN><SPAN>100</SPAN><SPAN>) Writing Flash ended with an error.</SPAN></DIV><DIV><SPAN>Ed:05</SPAN><SPAN>: File </SPAN><SPAN>'freertos_message_buffers_primary_core.elf'</SPAN><SPAN> load failure: Nn(</SPAN><SPAN>05</SPAN><SPAN>). Wire ACK Fault in DAP access</SPAN></DIV><DIV><SPAN>Nt: Loading </SPAN><SPAN>'freertos_message_buffers_primary_core.elf'</SPAN><SPAN> ELF </SPAN><SPAN>0x33FC0000</SPAN><SPAN> len </SPAN><SPAN>0x7144</SPAN></DIV><DIV><SPAN>Nc: Opening flash driver </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN></DIV><DIV><SPAN>Nc: request to clear DAP error failed - status </SPAN><SPAN>5</SPAN></DIV><DIV><SPAN>Pb: (</SPAN><SPAN>100</SPAN><SPAN>) Writing Flash ended with an error.</SPAN></DIV><DIV><SPAN>Ed:05</SPAN><SPAN>: File </SPAN><SPAN>'freertos_message_buffers_primary_core.elf'</SPAN><SPAN> load failure: Nn(</SPAN><SPAN>05</SPAN><SPAN>). Wire ACK Fault in DAP access</SPAN></DIV><DIV><SPAN>Pc: (</SPAN><SPAN>100</SPAN><SPAN>) Target Operation Failed</SPAN></DIV><DIV><SPAN>Nc: request to clear DAP error failed - status </SPAN><SPAN>5</SPAN></DIV><DIV><SPAN>Nc: request to clear DAP error failed - status </SPAN><SPAN>5</SPAN></DIV><DIV><SPAN>Nc: error closing down debug session - Nn(</SPAN><SPAN>05</SPAN><SPAN>). Wire ACK Fault in DAP access</SPAN></DIV><BR /><DIV><SPAN>INFO</SPAN><SPAN>: Exact match for MIMXRT1176xxxxx:MIMXR</SPAN><SPAN>T1170</SPAN><SPAN>-EVKB found</SPAN></DIV><DIV><SPAN>INFO</SPAN><SPAN>: Selected device MIMXRT1176xxxxx:MIMXR</SPAN><SPAN>T1170</SPAN><SPAN>-EVKB</SPAN></DIV><DIV><SPAN>INFO</SPAN><SPAN>: Getting available probes</SPAN></DIV><DIV><SPAN>INFO</SPAN><SPAN>: Selecting probe by serial substring</SPAN></DIV><DIV><SPAN>INFO</SPAN><SPAN>: Selected probe #</SPAN><SPAN>1</SPAN><SPAN> H3RHID4AC30FD (MCU-LINK on-board (r0E2) CMSIS-DAP </SPAN><SPAN>V3.160</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>INFO</SPAN><SPAN>: MCU-Link firmware update `check`: Probe ([H3RHID4AC30FD] [MCU-LINK on-board (r0E2) CMSIS-DAP </SPAN><SPAN>V3.160</SPAN><SPAN>]) is already running the same firmware version as the included firmware version [</SPAN><SPAN>3</SPAN><SPAN>.</SPAN><SPAN>160</SPAN><SPAN>]</SPAN></DIV><DIV><SPAN>CRITICAL</SPAN><SPAN>: Critical error</SPAN></DIV><DIV><SPAN>ERRMSG: </SPAN><SPAN>Exception</SPAN><SPAN>: Flash operation exited with code </SPAN><SPAN><SPAN>1<BR /><BR /><BR /><BR /><STRONG>This is the log when the flashing actually succeeds:&nbsp;</STRONG><BR /></SPAN></SPAN><DIV><BR /><DIV><SPAN>[</SPAN><SPAN>2025-09-18T01:03:12.927</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Users/melker/.mcuxpressotools/pemicrogdbserver/pegdbserver_console -showhardware</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T01:03:12.928</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Applications/SEGGER/JLink_V824/JLinkGDBServerCLExe -listprobes USB</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T01:03:12.928</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Applications/LinkServer_25.</SPAN><SPAN>7</SPAN><SPAN>.</SPAN><SPAN>33</SPAN><SPAN>/LinkServer probes --json</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T01:03:14.329</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Users/melker/.mcuxpressotools/pemicrogdbserver/pegdbserver_console -showhardware</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T01:03:14.338</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Applications/SEGGER/JLink_V824/JLinkGDBServerCLExe -listprobes USB</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T01:03:14.346</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Applications/LinkServer_25.</SPAN><SPAN>7</SPAN><SPAN>.</SPAN><SPAN>33</SPAN><SPAN>/LinkServer probes --json</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T01:03:17.511</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Applications/LinkServer_25.</SPAN><SPAN>7</SPAN><SPAN>.</SPAN><SPAN>33</SPAN><SPAN>/LinkServer flash --probe H3RHID4AC30FD --no-boot MIMXRT1176xxxxx:MIMXR</SPAN><SPAN>T1170</SPAN><SPAN>-EVKB load /Users/melker/CodeProjects/AudioBox/code/code_primary_core/armgcc/flexspi_nor_debug/freertos_message_buffers_primary_core.elf</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T01:03:23.784</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN> <SPAN>INFO</SPAN><SPAN>: Exact match for MIMXRT1176xxxxx:MIMXR</SPAN><SPAN>T1170</SPAN><SPAN>-EVKB found</SPAN></DIV><DIV><SPAN>INFO</SPAN><SPAN>: Selected device MIMXRT1176xxxxx:MIMXR</SPAN><SPAN>T1170</SPAN><SPAN>-EVKB</SPAN></DIV><DIV><SPAN>INFO</SPAN><SPAN>: Getting available probes</SPAN></DIV><DIV><SPAN>INFO</SPAN><SPAN>: Selecting probe by serial substring</SPAN></DIV><DIV><SPAN>INFO</SPAN><SPAN>: Selected probe #</SPAN><SPAN>1</SPAN><SPAN> H3RHID4AC30FD (MCU-LINK on-board (r0E2) CMSIS-DAP </SPAN><SPAN>V3.160</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>INFO</SPAN><SPAN>: MCU-Link firmware update `check`: Probe ([H3RHID4AC30FD] [MCU-LINK on-board (r0E2) CMSIS-DAP </SPAN><SPAN>V3.160</SPAN><SPAN>]) is already running the same firmware version as the included firmware version [</SPAN><SPAN>3</SPAN><SPAN>.</SPAN><SPAN>160</SPAN><SPAN>]</SPAN></DIV><BR /><DIV><SPAN>[</SPAN><SPAN>2025-09-18T01:03:23.784</SPAN><SPAN>] [LinkServer] </SPAN><SPAN>[info]</SPAN><SPAN> LinkServer flash operation completed successfully:</SPAN></DIV><DIV><SPAN>Firmware update `check`: not required - forced update can be performed using: `./LinkServer probe #</SPAN><SPAN>1</SPAN><SPAN> update forced`</SPAN></DIV><DIV><SPAN>Ns: LinkServer RedlinkMulti Driver </SPAN><SPAN>v25.7</SPAN><SPAN> (Jul </SPAN><SPAN>21</SPAN> <SPAN>2025</SPAN> <SPAN>20:37:00</SPAN><SPAN> - crt_emu_cm_redlink build </SPAN><SPAN>1038</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Pc: ( </SPAN><SPAN>0</SPAN><SPAN>) Reading remote configuration</SPAN></DIV><DIV><SPAN>Wc(</SPAN><SPAN>03</SPAN><SPAN>). No cache support.</SPAN></DIV><DIV><SPAN>Nc: Found generic directory XML file in /var/folders/8x/1csc34zn7pq1_ksyf9k3x24h0000gn/T/tmpci6yg1l_/crt_directory.xml</SPAN></DIV><DIV><SPAN>Pc: ( </SPAN><SPAN>5</SPAN><SPAN>) Remote configuration complete</SPAN></DIV><DIV><SPAN>Nc: Reconnected to existing LinkServer process.</SPAN></DIV><DIV><SPAN>Wc: ============= SCRIPT: </SPAN><SPAN>RT1170_connect_M7_wake_M4.scp</SPAN><SPAN> =============</SPAN></DIV><DIV><SPAN>Wc: R</SPAN><SPAN>T1170</SPAN><SPAN> Connect M7 and Wake M4 Script</SPAN></DIV><DIV><SPAN>Wc: DpID = 6BA02477</SPAN></DIV><DIV><SPAN>Wc: APID = </SPAN><SPAN>0x84770001</SPAN></DIV><DIV><SPAN>Wc: Setting M4 spin code</SPAN></DIV><DIV><SPAN>Wc: Setting M4 clock</SPAN></DIV><DIV><SPAN>Wc: Resetting M4 core</SPAN></DIV><DIV><SPAN>Wc: Releasing M4</SPAN></DIV><DIV><SPAN>Wc: View cores on the DAP AP</SPAN></DIV><DIV><SPAN>Wc: DpID = 6BA02477</SPAN></DIV><DIV><SPAN>Wc: TAP </SPAN><SPAN>0</SPAN><SPAN>: 6BA02477 Core </SPAN><SPAN>0</SPAN><SPAN>: M7 APID: </SPAN><SPAN>84770001</SPAN><SPAN> ROM Table: E00FD003*</SPAN></DIV><DIV><SPAN>Wc: TAP </SPAN><SPAN>0</SPAN><SPAN>: 6BA02477 Core </SPAN><SPAN>1</SPAN><SPAN>: M4 APID: </SPAN><SPAN>24770011</SPAN><SPAN> ROM Table: E00FF003</SPAN></DIV><DIV><SPAN>Wc: ============= END SCRIPT ========================================</SPAN></DIV><DIV><SPAN>Nc: Probe Firmware: MCU-LINK on-board (r0E2) CMSIS-DAP </SPAN><SPAN>V3.160</SPAN><SPAN> (NXP Semiconductors)</SPAN></DIV><DIV><SPAN>Nc: Serial Number: H3RHID4AC30FD</SPAN></DIV><DIV><SPAN>Nc: VID:PID: </SPAN><SPAN>1FC9:0143</SPAN></DIV><DIV><SPAN>Nc: USB Path: </SPAN><SPAN>0014:0002:00</SPAN></DIV><DIV><SPAN>Nc: Using memory from core </SPAN><SPAN>0</SPAN><SPAN> after searching for a good core</SPAN></DIV><DIV><SPAN>Pc: ( </SPAN><SPAN>30</SPAN><SPAN>) Emulator Connected</SPAN></DIV><DIV><SPAN>Pc: ( </SPAN><SPAN>40</SPAN><SPAN>) </SPAN><SPAN>Debug</SPAN><SPAN> Halt</SPAN></DIV><DIV><SPAN>Pc: ( </SPAN><SPAN>50</SPAN><SPAN>) CPU ID</SPAN></DIV><DIV><SPAN>Nc: debug interface type = CoreSight DP (DAP DP ID 6BA02477) over SWD TAP </SPAN><SPAN>0</SPAN></DIV><DIV><SPAN>Nc: processor type = Cortex-M7 (CPU ID 00000C27) on DAP AP </SPAN><SPAN>0</SPAN></DIV><DIV><SPAN>Nc: number of h/w breakpoints = </SPAN><SPAN>8</SPAN></DIV><DIV><SPAN>Nc: number of flash patches = </SPAN><SPAN>0</SPAN></DIV><DIV><SPAN>Nc: number of h/w watchpoints = </SPAN><SPAN>4</SPAN></DIV><DIV><SPAN>Nc: Probe(</SPAN><SPAN>0</SPAN><SPAN><LI-EMOJI id="lia_disappointed-face" title=":disappointed_face:"></LI-EMOJI> Connected&amp;Reset. DpID: 6BA02477. CpuID: 00000C27. </SPAN><SPAN>Info</SPAN><SPAN>: &lt;None&gt;</SPAN></DIV><DIV><SPAN>Nc: </SPAN><SPAN>Debug</SPAN><SPAN> protocol: SWD. RTCK: Disabled. Vector catch: Disabled.</SPAN></DIV><DIV><SPAN>Ns: Content of CoreSight </SPAN><SPAN>Debug</SPAN><SPAN> ROM(s):</SPAN></DIV><DIV><SPAN>Nc: RBASE E00FD000: CID B105100D PID </SPAN><SPAN>000008E88C</SPAN><SPAN> ROM (type </SPAN><SPAN>0x1</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>1</SPAN><SPAN> E00FE000: CID B105100D PID </SPAN><SPAN>04000BB4C8</SPAN><SPAN> ROM (type </SPAN><SPAN>0x1</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>2</SPAN><SPAN> E00FF000: CID B105100D PID </SPAN><SPAN>04000BB4C7</SPAN><SPAN> ROM (type </SPAN><SPAN>0x1</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>3</SPAN><SPAN> E000E000: CID B105E00D PID </SPAN><SPAN>04000BB00C</SPAN><SPAN> Gen SCS (type </SPAN><SPAN>0x0</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>3</SPAN><SPAN> E0001000: CID B105E00D PID </SPAN><SPAN>04000BB002</SPAN><SPAN> Gen DWT (type </SPAN><SPAN>0x0</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>3</SPAN><SPAN> E0002000: CID B105E00D PID </SPAN><SPAN>04000BB00E</SPAN><SPAN> Gen (type </SPAN><SPAN>0x0</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>3</SPAN><SPAN> E0000000: CID B105E00D PID </SPAN><SPAN>04000BB001</SPAN><SPAN> Gen ITM (type </SPAN><SPAN>0x0</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>2</SPAN><SPAN> E0041000: CID B105900D PID </SPAN><SPAN>04001BB975</SPAN><SPAN> CSt ARM </SPAN><SPAN>ETMv4.0</SPAN><SPAN> type </SPAN><SPAN>0x13</SPAN><SPAN> Trace Source - Core</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>2</SPAN><SPAN> E0042000: CID B105900D PID </SPAN><SPAN>04004BB906</SPAN><SPAN> CSt type </SPAN><SPAN>0x14</SPAN> <SPAN>Debug</SPAN><SPAN> Control - Trigger, </SPAN><SPAN>e.g</SPAN><SPAN>. ECT</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>1</SPAN><SPAN> E0043000: CID B105900D PID </SPAN><SPAN>04001BB908</SPAN><SPAN> CSt CSTF type </SPAN><SPAN>0x12</SPAN><SPAN> Trace Link - Trace funnel/router</SPAN></DIV><DIV><SPAN>Nc: NXP: MIMXRT1176xxxxx</SPAN></DIV><DIV><SPAN>Nc: DAP stride is </SPAN><SPAN>1024</SPAN><SPAN> bytes (</SPAN><SPAN>256</SPAN><SPAN> words)</SPAN></DIV><DIV><SPAN>Nc: Inspected </SPAN><SPAN>v.2</SPAN><SPAN> External Flash Device on SPI using SFDP JEDEC ID </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN></DIV><DIV><SPAN>Nc: Image </SPAN><SPAN>'iMXRT1170_SFDP_FlexSPI1_A_QSPI Jul 21 2025 18:35:07'</SPAN></DIV><DIV><SPAN>Nc: Opening flash driver </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN></DIV><DIV><SPAN>Nc: Sending VECTRESET to run flash driver</SPAN></DIV><DIV><SPAN>Nc: Flash variant </SPAN><SPAN>'iMXRT1170_SFDP_FlexSPI1_A_QSPI Jul 21 2025 18:35:07'</SPAN><SPAN> detected (64MB = </SPAN><SPAN>1024</SPAN><SPAN>*64K at </SPAN><SPAN>0x30000000</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: Closing flash driver </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN></DIV><DIV><SPAN>Pc: ( </SPAN><SPAN>65</SPAN><SPAN>) Chip Setup Complete</SPAN></DIV><DIV><SPAN>Pc: ( </SPAN><SPAN>70</SPAN><SPAN>) License Check Complete</SPAN></DIV><DIV><SPAN>Nt: Loading </SPAN><SPAN>'freertos_message_buffers_primary_core.elf'</SPAN><SPAN> ELF </SPAN><SPAN>0x30000400</SPAN><SPAN> len </SPAN><SPAN>0x200</SPAN></DIV><DIV><SPAN>Nc: Opening flash driver </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN><SPAN> (already resident)</SPAN></DIV><DIV><SPAN>Nc: Sending VECTRESET to run flash driver</SPAN></DIV><DIV><SPAN>Nc: Flash variant </SPAN><SPAN>'iMXRT1170_SFDP_FlexSPI1_A_QSPI Jul 21 2025 18:35:07'</SPAN><SPAN> detected (64MB = </SPAN><SPAN>1024</SPAN><SPAN>*64K at </SPAN><SPAN>0x30000000</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Pb: </SPAN><SPAN>1</SPAN><SPAN> of </SPAN><SPAN>1</SPAN><SPAN> ( </SPAN><SPAN>0</SPAN><SPAN>) Writing sectors </SPAN><SPAN>0</SPAN><SPAN>-</SPAN><SPAN>0</SPAN><SPAN> at </SPAN><SPAN>0x30000400</SPAN><SPAN> with </SPAN><SPAN>512</SPAN><SPAN> bytes</SPAN></DIV><DIV><SPAN>Ps: ( </SPAN><SPAN>0</SPAN><SPAN>) at </SPAN><SPAN>30000000</SPAN><SPAN>: </SPAN><SPAN>0</SPAN><SPAN> bytes - </SPAN><SPAN>0</SPAN><SPAN>/</SPAN><SPAN>1536</SPAN></DIV><DIV><SPAN>Ps: (</SPAN><SPAN>100</SPAN><SPAN>) at </SPAN><SPAN>30000000</SPAN><SPAN>: </SPAN><SPAN>16384</SPAN><SPAN> bytes - </SPAN><SPAN>16384</SPAN><SPAN>/</SPAN><SPAN>1536</SPAN></DIV><DIV><SPAN>Nc: </SPAN><SPAN>30004000</SPAN><SPAN> done </SPAN><SPAN>100</SPAN><SPAN>% (</SPAN><SPAN>16384</SPAN><SPAN> out of </SPAN><SPAN>1536</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: Sectors written: </SPAN><SPAN>1</SPAN><SPAN>, unchanged: </SPAN><SPAN>0</SPAN><SPAN>, total: </SPAN><SPAN>1</SPAN></DIV><DIV><SPAN>Nc: Closing flash driver </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN></DIV><DIV><SPAN>Pb: (</SPAN><SPAN>100</SPAN><SPAN>) Finished writing Flash successfully.</SPAN></DIV><DIV><SPAN>Nt: Loaded </SPAN><SPAN>0x200</SPAN><SPAN> bytes in 295ms (about 1kB/s)</SPAN></DIV><DIV><SPAN>Nt: Loading </SPAN><SPAN>'freertos_message_buffers_primary_core.elf'</SPAN><SPAN> ELF </SPAN><SPAN>0x30001000</SPAN><SPAN> len </SPAN><SPAN>0x30</SPAN></DIV><DIV><SPAN>Nc: Opening flash driver </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN><SPAN> (already resident)</SPAN></DIV><DIV><SPAN>Nc: Sending VECTRESET to run flash driver</SPAN></DIV><DIV><SPAN>Nc: Flash variant </SPAN><SPAN>'iMXRT1170_SFDP_FlexSPI1_A_QSPI Jul 21 2025 18:35:07'</SPAN><SPAN> detected (64MB = </SPAN><SPAN>1024</SPAN><SPAN>*64K at </SPAN><SPAN>0x30000000</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Pb: </SPAN><SPAN>1</SPAN><SPAN> of </SPAN><SPAN>1</SPAN><SPAN> ( </SPAN><SPAN>0</SPAN><SPAN>) Writing sectors </SPAN><SPAN>0</SPAN><SPAN>-</SPAN><SPAN>0</SPAN><SPAN> at </SPAN><SPAN>0x30001000</SPAN><SPAN> with </SPAN><SPAN>48</SPAN><SPAN> bytes</SPAN></DIV><DIV><SPAN>Ps: ( </SPAN><SPAN>0</SPAN><SPAN>) at </SPAN><SPAN>30000000</SPAN><SPAN>: </SPAN><SPAN>0</SPAN><SPAN> bytes - </SPAN><SPAN>0</SPAN><SPAN>/</SPAN><SPAN>4144</SPAN></DIV><DIV><SPAN>Ps: (</SPAN><SPAN>100</SPAN><SPAN>) at </SPAN><SPAN>30000000</SPAN><SPAN>: </SPAN><SPAN>16384</SPAN><SPAN> bytes - </SPAN><SPAN>16384</SPAN><SPAN>/</SPAN><SPAN>4144</SPAN></DIV><DIV><SPAN>Nc: </SPAN><SPAN>30004000</SPAN><SPAN> done </SPAN><SPAN>100</SPAN><SPAN>% (</SPAN><SPAN>16384</SPAN><SPAN> out of </SPAN><SPAN>4144</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: Sectors written: </SPAN><SPAN>1</SPAN><SPAN>, unchanged: </SPAN><SPAN>0</SPAN><SPAN>, total: </SPAN><SPAN>1</SPAN></DIV><DIV><SPAN>Nc: Closing flash driver </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN></DIV><DIV><SPAN>Pb: (</SPAN><SPAN>100</SPAN><SPAN>) Finished writing Flash successfully.</SPAN></DIV><DIV><SPAN>Nt: Loaded </SPAN><SPAN>0x30</SPAN><SPAN> bytes in 310ms (about 0kB/s)</SPAN></DIV><DIV><SPAN>Nt: Loading </SPAN><SPAN>'freertos_message_buffers_primary_core.elf'</SPAN><SPAN> ELF </SPAN><SPAN>0x30002000</SPAN><SPAN> len </SPAN><SPAN>0x12044</SPAN></DIV><DIV><SPAN>Nc: Opening flash driver </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN><SPAN> (already resident)</SPAN></DIV><DIV><SPAN>Nc: Sending VECTRESET to run flash driver</SPAN></DIV><DIV><SPAN>Nc: Flash variant </SPAN><SPAN>'iMXRT1170_SFDP_FlexSPI1_A_QSPI Jul 21 2025 18:35:07'</SPAN><SPAN> detected (64MB = </SPAN><SPAN>1024</SPAN><SPAN>*64K at </SPAN><SPAN>0x30000000</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Pb: </SPAN><SPAN>1</SPAN><SPAN> of </SPAN><SPAN>1</SPAN><SPAN> ( </SPAN><SPAN>0</SPAN><SPAN>) Writing sectors </SPAN><SPAN>0</SPAN><SPAN>-</SPAN><SPAN>1</SPAN><SPAN> at </SPAN><SPAN>0x30002000</SPAN><SPAN> with </SPAN><SPAN>73796</SPAN><SPAN> bytes</SPAN></DIV><DIV><SPAN>Ps: ( </SPAN><SPAN>0</SPAN><SPAN>) at </SPAN><SPAN>30000000</SPAN><SPAN>: </SPAN><SPAN>0</SPAN><SPAN> bytes - </SPAN><SPAN>0</SPAN><SPAN>/</SPAN><SPAN>81988</SPAN></DIV><DIV><SPAN>Ps: ( </SPAN><SPAN>19</SPAN><SPAN>) at </SPAN><SPAN>30000000</SPAN><SPAN>: </SPAN><SPAN>16384</SPAN><SPAN> bytes - </SPAN><SPAN>16384</SPAN><SPAN>/</SPAN><SPAN>81988</SPAN></DIV><DIV><SPAN>Nc: </SPAN><SPAN>30004000</SPAN><SPAN> done </SPAN><SPAN>19</SPAN><SPAN>% (</SPAN><SPAN>16384</SPAN><SPAN> out of </SPAN><SPAN>81988</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Ps: ( </SPAN><SPAN>39</SPAN><SPAN>) at </SPAN><SPAN>30004000</SPAN><SPAN>: </SPAN><SPAN>16384</SPAN><SPAN> bytes - </SPAN><SPAN>32768</SPAN><SPAN>/</SPAN><SPAN>81988</SPAN></DIV><DIV><SPAN>Nc: </SPAN><SPAN>30008000</SPAN><SPAN> done </SPAN><SPAN>39</SPAN><SPAN>% (</SPAN><SPAN>32768</SPAN><SPAN> out of </SPAN><SPAN>81988</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Ps: ( </SPAN><SPAN>59</SPAN><SPAN>) at </SPAN><SPAN>30008000</SPAN><SPAN>: </SPAN><SPAN>16384</SPAN><SPAN> bytes - </SPAN><SPAN>49152</SPAN><SPAN>/</SPAN><SPAN>81988</SPAN></DIV><DIV><SPAN>Nc: 3000C000 done </SPAN><SPAN>59</SPAN><SPAN>% (</SPAN><SPAN>49152</SPAN><SPAN> out of </SPAN><SPAN>81988</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Ps: ( </SPAN><SPAN>79</SPAN><SPAN>) at 3000C000: </SPAN><SPAN>16384</SPAN><SPAN> bytes - </SPAN><SPAN>65536</SPAN><SPAN>/</SPAN><SPAN>81988</SPAN></DIV><DIV><SPAN>Nc: </SPAN><SPAN>30010000</SPAN><SPAN> done </SPAN><SPAN>79</SPAN><SPAN>% (</SPAN><SPAN>65536</SPAN><SPAN> out of </SPAN><SPAN>81988</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Ps: (</SPAN><SPAN>100</SPAN><SPAN>) at </SPAN><SPAN>30010000</SPAN><SPAN>: </SPAN><SPAN>65536</SPAN><SPAN> bytes - </SPAN><SPAN>131072</SPAN><SPAN>/</SPAN><SPAN>81988</SPAN></DIV><DIV><SPAN>Nc: Sectors written: </SPAN><SPAN>1</SPAN><SPAN>, unchanged: </SPAN><SPAN>1</SPAN><SPAN>, total: </SPAN><SPAN>2</SPAN></DIV><DIV><SPAN>Nc: Closing flash driver </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN></DIV><DIV><SPAN>Pb: (</SPAN><SPAN>100</SPAN><SPAN>) Finished writing Flash successfully.</SPAN></DIV><DIV><SPAN>Nt: Loaded </SPAN><SPAN>0x12044</SPAN><SPAN> bytes in 499ms (about 147kB/s)</SPAN></DIV><DIV><SPAN>Nt: Loading </SPAN><SPAN>'freertos_message_buffers_primary_core.elf'</SPAN><SPAN> ELF </SPAN><SPAN>0x33FC0000</SPAN><SPAN> len </SPAN><SPAN>0x7144</SPAN></DIV><DIV><SPAN>Nc: Opening flash driver </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN><SPAN> (already resident)</SPAN></DIV><DIV><SPAN>Nc: Sending VECTRESET to run flash driver</SPAN></DIV><DIV><SPAN>Nc: Flash variant </SPAN><SPAN>'iMXRT1170_SFDP_FlexSPI1_A_QSPI Jul 21 2025 18:35:07'</SPAN><SPAN> detected (64MB = </SPAN><SPAN>1024</SPAN><SPAN>*64K at </SPAN><SPAN>0x30000000</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Pb: </SPAN><SPAN>1</SPAN><SPAN> of </SPAN><SPAN>1</SPAN><SPAN> ( </SPAN><SPAN>0</SPAN><SPAN>) Writing sectors </SPAN><SPAN>1020-1020</SPAN><SPAN> at </SPAN><SPAN>0x33FC0000</SPAN><SPAN> with </SPAN><SPAN>28996</SPAN><SPAN> bytes</SPAN></DIV><DIV><SPAN>Ps: ( </SPAN><SPAN>0</SPAN><SPAN>) at 33FC0000: </SPAN><SPAN>0</SPAN><SPAN> bytes - </SPAN><SPAN>0</SPAN><SPAN>/</SPAN><SPAN>28996</SPAN></DIV><DIV><SPAN>Ps: ( </SPAN><SPAN>56</SPAN><SPAN>) at 33FC0000: </SPAN><SPAN>16384</SPAN><SPAN> bytes - </SPAN><SPAN>16384</SPAN><SPAN>/</SPAN><SPAN>28996</SPAN></DIV><DIV><SPAN>Nc: 33FC4000 done </SPAN><SPAN>56</SPAN><SPAN>% (</SPAN><SPAN>16384</SPAN><SPAN> out of </SPAN><SPAN>28996</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Ps: (</SPAN><SPAN>100</SPAN><SPAN>) at 33FC4000: </SPAN><SPAN>16384</SPAN><SPAN> bytes - </SPAN><SPAN>32768</SPAN><SPAN>/</SPAN><SPAN>28996</SPAN></DIV><DIV><SPAN>Nc: 33FC8000 done </SPAN><SPAN>100</SPAN><SPAN>% (</SPAN><SPAN>32768</SPAN><SPAN> out of </SPAN><SPAN>28996</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: Sectors written: </SPAN><SPAN>1</SPAN><SPAN>, unchanged: </SPAN><SPAN>0</SPAN><SPAN>, total: </SPAN><SPAN>1</SPAN></DIV><DIV><SPAN>Nc: Closing flash driver </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN></DIV><DIV><SPAN>Pb: (</SPAN><SPAN>100</SPAN><SPAN>) Finished writing Flash successfully.</SPAN></DIV><DIV><SPAN>Nt: Loaded </SPAN><SPAN>0x7144</SPAN><SPAN> bytes in 550ms (about 52kB/s)</SPAN></DIV><DIV><SPAN>Nt: Reset target (system)</SPAN></DIV><DIV><SPAN>Wc: ============= SCRIPT: </SPAN><SPAN>RT1170_reset.scp</SPAN><SPAN> =============</SPAN></DIV><DIV><SPAN>Wc: This probe = </SPAN><SPAN>1</SPAN></DIV><DIV><SPAN>Wc: This TAP = </SPAN><SPAN>0</SPAN></DIV><DIV><SPAN>Wc: This core = </SPAN><SPAN>0</SPAN></DIV><DIV><SPAN>Wc: SYSTEM Reset</SPAN></DIV><DIV><SPAN>Wc: Wirespeed = </SPAN><SPAN>10000000</SPAN><SPAN> Hz</SPAN></DIV><DIV><SPAN>Wc: DpID = 6BA02477</SPAN></DIV><DIV><SPAN>Wc: TAP </SPAN><SPAN>0</SPAN><SPAN>: 6BA02477 Core </SPAN><SPAN>0</SPAN><SPAN>: M7 APID: </SPAN><SPAN>84770001</SPAN><SPAN> ROM Table: E00FD003*</SPAN></DIV><DIV><SPAN>Wc: TAP </SPAN><SPAN>0</SPAN><SPAN>: 6BA02477 AP </SPAN><SPAN>1</SPAN><SPAN>: APID: </SPAN><SPAN>24770011</SPAN><SPAN> ROM Table: E00FF003</SPAN></DIV><DIV><SPAN>Wc: TAP </SPAN><SPAN>0</SPAN><SPAN>: 6BA02477 AP </SPAN><SPAN>2</SPAN><SPAN>: APID: </SPAN><SPAN>54770002</SPAN><SPAN> ROM Table: </SPAN><SPAN>00000002</SPAN></DIV><DIV><SPAN>Wc: APID = </SPAN><SPAN>0x84770001</SPAN></DIV><DIV><SPAN>Wc: Setting M4 spin code</SPAN></DIV><DIV><SPAN>Wc: Setting M4 clock</SPAN></DIV><DIV><SPAN>Wc: Resetting M4 core</SPAN></DIV><DIV><SPAN>Wc: Releasing M4</SPAN></DIV><DIV><SPAN>Wc: View cores on the DAP AP</SPAN></DIV><DIV><SPAN>Wc: DpID = 6BA02477</SPAN></DIV><DIV><SPAN>Wc: TAP </SPAN><SPAN>0</SPAN><SPAN>: 6BA02477 Core </SPAN><SPAN>0</SPAN><SPAN>: M7 APID: </SPAN><SPAN>84770001</SPAN><SPAN> ROM Table: E00FD003*</SPAN></DIV><DIV><SPAN>Wc: TAP </SPAN><SPAN>0</SPAN><SPAN>: 6BA02477 Core </SPAN><SPAN>1</SPAN><SPAN>: M4 APID: </SPAN><SPAN>24770011</SPAN><SPAN> ROM Table: E00FF003</SPAN></DIV><DIV><SPAN>Wc: R15 = </SPAN><SPAN>0x00223104</SPAN></DIV><DIV><SPAN>Wc: Vector table SP/PC is the reset context.</SPAN></DIV><DIV><SPAN>Wc: PC = </SPAN><SPAN>0x3000247D</SPAN></DIV><DIV><SPAN>Wc: SP = </SPAN><SPAN>0x20040000</SPAN></DIV><DIV><SPAN>Wc: XPSR = </SPAN><SPAN>0x01000000</SPAN></DIV><DIV><SPAN>Wc: VTOR = </SPAN><SPAN>0x30002000</SPAN></DIV><DIV><SPAN>Wc: Set DEMCR = </SPAN><SPAN>0x010007F1</SPAN></DIV><DIV><SPAN>Wc: ============= END SCRIPT ===========================</SPAN></DIV><DIV><SPAN>Ns: Stopped: Halt</SPAN></DIV><DIV><SPAN>Ns: restart on reset</SPAN></DIV><BR /><BR /><BR /><BR /><BR /></DIV></DIV></DIV><P>&nbsp;</P> Wed, 17 Sep 2025 23:10:23 GMT https://community.nxp.com/t5/i-MX-RT-Crossover-MCUs/RT1170-EVKB-Multicore-project-and-LinkServer-Flash-programmer/m-p/2171441#M35216 cyberhelmer 2025-09-17T23:10:23Z Re: RT1170 EVKB Multicore project and LinkServer Flash programmer not working (mcuxpresso vs code) https://community.nxp.com/t5/i-MX-RT-Crossover-MCUs/RT1170-EVKB-Multicore-project-and-LinkServer-Flash-programmer/m-p/2171443#M35217 <P><SPAN>Also, sometimes when I make changes to both cores and do a clean and rebuild of both projects only the m7 is updated with the correct code, m4 still runs an older version.&nbsp;</SPAN></P> Wed, 17 Sep 2025 23:17:11 GMT https://community.nxp.com/t5/i-MX-RT-Crossover-MCUs/RT1170-EVKB-Multicore-project-and-LinkServer-Flash-programmer/m-p/2171443#M35217 cyberhelmer 2025-09-17T23:17:11Z Re: RT1170 EVKB Multicore project and LinkServer Flash programmer not working (mcuxpresso vs code) https://community.nxp.com/t5/i-MX-RT-Crossover-MCUs/RT1170-EVKB-Multicore-project-and-LinkServer-Flash-programmer/m-p/2171595#M35221 <P>Hi&nbsp;<a href="https://community.nxp.com/t5/user/viewprofilepage/user-id/251274">@cyberhelmer</a>&nbsp;,</P> <P>Thanks for&nbsp; your interest in NXP MIMXRT series!</P> <P>During the failed operation, I noticed it was missing from the logs:</P> <PRE class="lia-code-sample language-markup"><CODE>Releasing M4</CODE></PRE> <P>This led to subsequent failures. We recommend updating the MCU-Link firmware and performing the following operation when debugging or programming again:</P> <P><span class="lia-inline-image-display-wrapper lia-image-align-inline" image-alt="Gavin_Jia_0-1758167694150.png" style="width: 400px;"><img src="https://community.nxp.com/t5/image/serverpage/image-id/357422iD4D5B078A4526AD1/image-size/medium?v=v2&amp;px=400" role="button" title="Gavin_Jia_0-1758167694150.png" alt="Gavin_Jia_0-1758167694150.png" /></span></P> <P>&nbsp;</P> <P>On the other hand, based on my personal experience, using JLink firmware provides better stability. If possible, try replacing the MCU-Link firmware with JLink firmware.</P> <P>Best regards,<BR />Gavin</P> Thu, 18 Sep 2025 03:56:16 GMT https://community.nxp.com/t5/i-MX-RT-Crossover-MCUs/RT1170-EVKB-Multicore-project-and-LinkServer-Flash-programmer/m-p/2171595#M35221 Gavin_Jia 2025-09-18T03:56:16Z Re: RT1170 EVKB Multicore project and LinkServer Flash programmer not working (mcuxpresso vs code) https://community.nxp.com/t5/i-MX-RT-Crossover-MCUs/RT1170-EVKB-Multicore-project-and-LinkServer-Flash-programmer/m-p/2171731#M35223 <P>I do have have latest firmware for the MCU-Link.&nbsp;<BR /><BR />Resetting the probe before a flash as you suggested does not make a difference unfortunately. Still get this error most of the time:&nbsp;<BR /><BR /></P><DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T09:09:34.034</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Users/melker/.mcuxpressotools/pemicrogdbserver/pegdbserver_console -showhardware</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T09:09:34.035</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Applications/SEGGER/JLink_V824/JLinkGDBServerCLExe -listprobes USB</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T09:09:34.035</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Applications/LinkServer_25.</SPAN><SPAN>7</SPAN><SPAN>.</SPAN><SPAN>33</SPAN><SPAN>/LinkServer probes --json</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T09:09:35.433</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Applications/MCUXpressoIDE_24.</SPAN><SPAN>12</SPAN><SPAN>.</SPAN><SPAN>148</SPAN><SPAN>/ide/tools/bin/arm-none-eabi-gcc --version</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T09:09:35.436</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Users/melker/.mcuxpressotools/arm-</SPAN><SPAN>gnu-toolchain-13.2.Rel1-darwin-x86_64-arm-none</SPAN><SPAN>-eabi/bin/arm-none-eabi-gcc --version</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T09:09:35.458</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Applications/MCUXpressoIDE_24.</SPAN><SPAN>12</SPAN><SPAN>.</SPAN><SPAN>148</SPAN><SPAN>/ide/tools/bin/arm-none-eabi-gcc --version</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T09:09:35.470</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Users/melker/.mcuxpressotools/arm-</SPAN><SPAN>gnu-toolchain-13.2.Rel1-darwin-x86_64-arm-none</SPAN><SPAN>-eabi/bin/arm-none-eabi-gcc --version</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T09:09:35.481</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Users/melker/.mcuxpressotools/arm-</SPAN><SPAN>gnu-toolchain-13.2.Rel1-darwin-x86_64-arm-none</SPAN><SPAN>-eabi/bin/arm-none-eabi-gcc --version</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T09:09:35.482</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Applications/MCUXpressoIDE_24.</SPAN><SPAN>12</SPAN><SPAN>.</SPAN><SPAN>148</SPAN><SPAN>/ide/tools/bin/arm-none-eabi-gcc --version</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T09:10:30.963</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Users/melker/.mcuxpressotools/pemicrogdbserver/pegdbserver_console -showhardware</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T09:10:30.965</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Applications/SEGGER/JLink_V824/JLinkGDBServerCLExe -listprobes USB</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T09:10:30.966</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Applications/LinkServer_25.</SPAN><SPAN>7</SPAN><SPAN>.</SPAN><SPAN>33</SPAN><SPAN>/LinkServer probes --json</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T09:10:32.425</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Users/melker/.mcuxpressotools/pemicrogdbserver/pegdbserver_console -showhardware</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T09:10:32.426</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Applications/SEGGER/JLink_V824/JLinkGDBServerCLExe -listprobes USB</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T09:10:32.427</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Applications/LinkServer_25.</SPAN><SPAN>7</SPAN><SPAN>.</SPAN><SPAN>33</SPAN><SPAN>/LinkServer probes --json</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T09:10:35.933</SPAN><SPAN>] [proc] </SPAN><SPAN>[info]</SPAN><SPAN> Cmd: /Applications/LinkServer_25.</SPAN><SPAN>7</SPAN><SPAN>.</SPAN><SPAN>33</SPAN><SPAN>/LinkServer flash --probe H3RHID4AC30FD --no-boot MIMXRT1176xxxxx:MIMXR</SPAN><SPAN>T1170</SPAN><SPAN>-EVKB load /Users/melker/CodeProjects/AudioBox/code/code_primary_core/armgcc/flexspi_nor_debug/freertos_message_buffers_primary_core.elf</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T09:10:39.480</SPAN><SPAN>] [proc] </SPAN><SPAN>[error]</SPAN><SPAN> /Applications/LinkServer_25.</SPAN><SPAN>7</SPAN><SPAN>.</SPAN><SPAN>33</SPAN><SPAN>/LinkServer exited with code </SPAN><SPAN>255</SPAN></DIV><DIV><SPAN>[</SPAN><SPAN>2025-09-18T09:10:39.480</SPAN><SPAN>] [proc] </SPAN><SPAN>[error]</SPAN><SPAN> Firmware update `check`: not required - forced update can be performed using: `./LinkServer probe #</SPAN><SPAN>1</SPAN><SPAN> update forced`</SPAN></DIV><DIV><SPAN>Ns: LinkServer RedlinkMulti Driver </SPAN><SPAN>v25.7</SPAN><SPAN> (Jul </SPAN><SPAN>21</SPAN> <SPAN>2025</SPAN> <SPAN>20:37:00</SPAN><SPAN> - crt_emu_cm_redlink build </SPAN><SPAN>1038</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Pc: ( </SPAN><SPAN>0</SPAN><SPAN>) Reading remote configuration</SPAN></DIV><DIV><SPAN>Wc(</SPAN><SPAN>03</SPAN><SPAN>). No cache support.</SPAN></DIV><DIV><SPAN>Nc: Found generic directory XML file in /var/folders/8x/1csc34zn7pq1_ksyf9k3x24h0000gn/T/tmps1gdrldt/crt_directory.xml</SPAN></DIV><DIV><SPAN>Pc: ( </SPAN><SPAN>5</SPAN><SPAN>) Remote configuration complete</SPAN></DIV><DIV><SPAN>Nc: Reconnected to existing LinkServer process.</SPAN></DIV><DIV><SPAN>Wc: ============= SCRIPT: </SPAN><SPAN>RT1170_connect_M7_wake_M4.scp</SPAN><SPAN> =============</SPAN></DIV><DIV><SPAN>Wc: R</SPAN><SPAN>T1170</SPAN><SPAN> Connect M7 and Wake M4 Script</SPAN></DIV><DIV><SPAN>Wc: DpID = 6BA02477</SPAN></DIV><DIV><SPAN>Wc: APID = </SPAN><SPAN>0x84770001</SPAN></DIV><DIV><SPAN>Wc: Setting M4 spin code</SPAN></DIV><DIV><SPAN>Wc: Setting M4 clock</SPAN></DIV><DIV><SPAN>Wc: Resetting M4 core</SPAN></DIV><DIV><SPAN>Wc: View cores on the DAP AP</SPAN></DIV><DIV><SPAN>Wc: DpID = 6BA02477</SPAN></DIV><DIV><SPAN>Wc: TAP </SPAN><SPAN>0</SPAN><SPAN>: 6BA02477 Core </SPAN><SPAN>0</SPAN><SPAN>: M7 APID: </SPAN><SPAN>84770001</SPAN><SPAN> ROM Table: E00FD003*</SPAN></DIV><DIV><SPAN>Wc: TAP </SPAN><SPAN>0</SPAN><SPAN>: 6BA02477 Core </SPAN><SPAN>1</SPAN><SPAN>: M4 APID: </SPAN><SPAN>24770011</SPAN><SPAN> ROM Table: E00FF003</SPAN></DIV><DIV><SPAN>Wc: ============= END SCRIPT ========================================</SPAN></DIV><DIV><SPAN>Nc: Probe Firmware: MCU-LINK on-board (r0E2) CMSIS-DAP </SPAN><SPAN>V3.160</SPAN><SPAN> (NXP Semiconductors)</SPAN></DIV><DIV><SPAN>Nc: Serial Number: H3RHID4AC30FD</SPAN></DIV><DIV><SPAN>Nc: VID:PID: </SPAN><SPAN>1FC9:0143</SPAN></DIV><DIV><SPAN>Nc: USB Path: </SPAN><SPAN>0014:0003:00</SPAN></DIV><DIV><SPAN>Nc: Using memory from core </SPAN><SPAN>0</SPAN><SPAN> after searching for a good core</SPAN></DIV><DIV><SPAN>Pc: ( </SPAN><SPAN>30</SPAN><SPAN>) Emulator Connected</SPAN></DIV><DIV><SPAN>Pc: ( </SPAN><SPAN>40</SPAN><SPAN>) </SPAN><SPAN>Debug</SPAN><SPAN> Halt</SPAN></DIV><DIV><SPAN>Pc: ( </SPAN><SPAN>50</SPAN><SPAN>) CPU ID</SPAN></DIV><DIV><SPAN>Nc: debug interface type = CoreSight DP (DAP DP ID 6BA02477) over SWD TAP </SPAN><SPAN>0</SPAN></DIV><DIV><SPAN>Nc: processor type = Cortex-M7 (CPU ID 00000C27) on DAP AP </SPAN><SPAN>0</SPAN></DIV><DIV><SPAN>Nc: number of h/w breakpoints = </SPAN><SPAN>8</SPAN></DIV><DIV><SPAN>Nc: number of flash patches = </SPAN><SPAN>0</SPAN></DIV><DIV><SPAN>Nc: number of h/w watchpoints = </SPAN><SPAN>4</SPAN></DIV><DIV><SPAN>Nc: Probe(</SPAN><SPAN>0</SPAN><SPAN><LI-EMOJI id="lia_disappointed-face" title=":disappointed_face:"></LI-EMOJI> Connected&amp;Reset. DpID: 6BA02477. CpuID: 00000C27. </SPAN><SPAN>Info</SPAN><SPAN>: &lt;None&gt;</SPAN></DIV><DIV><SPAN>Nc: </SPAN><SPAN>Debug</SPAN><SPAN> protocol: SWD. RTCK: Disabled. Vector catch: Disabled.</SPAN></DIV><DIV><SPAN>Ns: Content of CoreSight </SPAN><SPAN>Debug</SPAN><SPAN> ROM(s):</SPAN></DIV><DIV><SPAN>Nc: RBASE E00FD000: CID B105100D PID </SPAN><SPAN>000008E88C</SPAN><SPAN> ROM (type </SPAN><SPAN>0x1</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>1</SPAN><SPAN> E00FE000: CID B105100D PID </SPAN><SPAN>04000BB4C8</SPAN><SPAN> ROM (type </SPAN><SPAN>0x1</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>2</SPAN><SPAN> E00FF000: CID B105100D PID </SPAN><SPAN>04000BB4C7</SPAN><SPAN> ROM (type </SPAN><SPAN>0x1</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>3</SPAN><SPAN> E000E000: CID B105E00D PID </SPAN><SPAN>04000BB00C</SPAN><SPAN> Gen SCS (type </SPAN><SPAN>0x0</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>3</SPAN><SPAN> E0001000: CID B105E00D PID </SPAN><SPAN>04000BB002</SPAN><SPAN> Gen DWT (type </SPAN><SPAN>0x0</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>3</SPAN><SPAN> E0002000: CID B105E00D PID </SPAN><SPAN>04000BB00E</SPAN><SPAN> Gen (type </SPAN><SPAN>0x0</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>3</SPAN><SPAN> E0000000: CID B105E00D PID </SPAN><SPAN>04000BB001</SPAN><SPAN> Gen ITM (type </SPAN><SPAN>0x0</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>2</SPAN><SPAN> E0041000: CID B105900D PID </SPAN><SPAN>04001BB975</SPAN><SPAN> CSt ARM </SPAN><SPAN>ETMv4.0</SPAN><SPAN> type </SPAN><SPAN>0x13</SPAN><SPAN> Trace Source - Core</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>2</SPAN><SPAN> E0042000: CID B105900D PID </SPAN><SPAN>04004BB906</SPAN><SPAN> CSt type </SPAN><SPAN>0x14</SPAN> <SPAN>Debug</SPAN><SPAN> Control - Trigger, </SPAN><SPAN>e.g</SPAN><SPAN>. ECT</SPAN></DIV><DIV><SPAN>Nc: ROM </SPAN><SPAN>1</SPAN><SPAN> E0043000: CID B105900D PID </SPAN><SPAN>04001BB908</SPAN><SPAN> CSt CSTF type </SPAN><SPAN>0x12</SPAN><SPAN> Trace Link - Trace funnel/router</SPAN></DIV><DIV><SPAN>Nc: NXP: MIMXRT1176xxxxx</SPAN></DIV><DIV><SPAN>Nc: DAP stride is </SPAN><SPAN>1024</SPAN><SPAN> bytes (</SPAN><SPAN>256</SPAN><SPAN> words)</SPAN></DIV><DIV><SPAN>Nc: Inspected </SPAN><SPAN>v.2</SPAN><SPAN> External Flash Device on SPI using SFDP JEDEC ID </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN></DIV><DIV><SPAN>Nc: Image </SPAN><SPAN>'iMXRT1170_SFDP_FlexSPI1_A_QSPI Jul 21 2025 18:35:07'</SPAN></DIV><DIV><SPAN>Nc: Opening flash driver </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN></DIV><DIV><SPAN>Nc: Sending VECTRESET to run flash driver</SPAN></DIV><DIV><SPAN>Nc: Flash variant </SPAN><SPAN>'iMXRT1170_SFDP_FlexSPI1_A_QSPI Jul 21 2025 18:35:07'</SPAN><SPAN> detected (64MB = </SPAN><SPAN>1024</SPAN><SPAN>*64K at </SPAN><SPAN>0x30000000</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>Nc: Closing flash driver </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN></DIV><DIV><SPAN>Pc: ( </SPAN><SPAN>65</SPAN><SPAN>) Chip Setup Complete</SPAN></DIV><DIV><SPAN>Pc: ( </SPAN><SPAN>70</SPAN><SPAN>) License Check Complete</SPAN></DIV><DIV><SPAN>Nt: Loading </SPAN><SPAN>'freertos_message_buffers_primary_core.elf'</SPAN><SPAN> ELF </SPAN><SPAN>0x30000400</SPAN><SPAN> len </SPAN><SPAN>0x200</SPAN></DIV><DIV><SPAN>Nc: Opening flash driver </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN><SPAN> (already resident)</SPAN></DIV><DIV><SPAN>Nc: Sending VECTRESET to run flash driver</SPAN></DIV><DIV><SPAN>Nc: request to clear DAP error failed - status </SPAN><SPAN>5</SPAN></DIV><DIV><SPAN>Nc: After error Nn(</SPAN><SPAN>05</SPAN><SPAN>). Wire ACK Fault in DAP access -</SPAN></DIV><DIV><SPAN>Nc: Failed to read address register in DAP - Nn(</SPAN><SPAN>05</SPAN><SPAN>). Wire ACK Fault in DAP access</SPAN></DIV><DIV><SPAN>Nc: flash driver polled mailbox (</SPAN><SPAN>8</SPAN><SPAN> bytes at </SPAN><SPAN>0x2000A840</SPAN><SPAN>) read failed (on poll </SPAN><SPAN>1</SPAN><SPAN>/</SPAN><SPAN>301</SPAN><SPAN>) - retrying after 1ms - rc Em(</SPAN><SPAN>17</SPAN><SPAN>). </SPAN><SPAN>Debug</SPAN><SPAN> port inaccessible after access at location </SPAN><SPAN>0x2000A840</SPAN></DIV><BR /><DIV><SPAN>Nc: request to clear DAP error failed - status </SPAN><SPAN>5</SPAN></DIV><DIV><SPAN>Nc: After error Nn(</SPAN><SPAN>05</SPAN><SPAN>). Wire ACK Fault in DAP access -</SPAN></DIV><DIV><SPAN>Nc: Failed to read address register in DAP - Nn(</SPAN><SPAN>05</SPAN><SPAN>). Wire ACK Fault in DAP access</SPAN></DIV><DIV><SPAN>Wc: flash driver polled mailbox (</SPAN><SPAN>8</SPAN><SPAN> bytes at </SPAN><SPAN>0x2000A840</SPAN><SPAN>) read failed (on poll </SPAN><SPAN>1</SPAN><SPAN>/</SPAN><SPAN>301</SPAN><SPAN>) - halting for postmortem - rc Em(</SPAN><SPAN>17</SPAN><SPAN>). </SPAN><SPAN>Debug</SPAN><SPAN> port inaccessible after access at location </SPAN><SPAN>0x2000A840</SPAN></DIV><BR /><DIV><SPAN>Wc: failed to halt target for postmortem - rc Nn(</SPAN><SPAN>05</SPAN><SPAN>). Wire ACK Fault in DAP access</SPAN></DIV><BR /><DIV><SPAN>Nc: request to clear DAP error failed - status </SPAN><SPAN>5</SPAN></DIV><DIV><SPAN>Nc: failed to read registers - Nn(</SPAN><SPAN>05</SPAN><SPAN>). Wire ACK Fault in DAP access</SPAN></DIV><DIV><SPAN>Nc: Flash Driver </SPAN><SPAN>V.2</SPAN><SPAN> startup failed - rc Em(</SPAN><SPAN>17</SPAN><SPAN>). </SPAN><SPAN>Debug</SPAN><SPAN> port inaccessible after access at location </SPAN><SPAN>0x2000A840</SPAN></DIV><DIV><SPAN>Pb: (</SPAN><SPAN>100</SPAN><SPAN>) Writing Flash ended with an error.</SPAN></DIV><DIV><SPAN>Ed:05</SPAN><SPAN>: File </SPAN><SPAN>'freertos_message_buffers_primary_core.elf'</SPAN><SPAN> load failure: Em(</SPAN><SPAN>17</SPAN><SPAN>). </SPAN><SPAN>Debug</SPAN><SPAN> port inaccessible after access at location </SPAN><SPAN>0x2000A840</SPAN></DIV><DIV><SPAN>Nt: Loading </SPAN><SPAN>'freertos_message_buffers_primary_core.elf'</SPAN><SPAN> ELF </SPAN><SPAN>0x30001000</SPAN><SPAN> len </SPAN><SPAN>0x30</SPAN></DIV><DIV><SPAN>Nc: Opening flash driver </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN></DIV><DIV><SPAN>Nc: request to clear DAP error failed - status </SPAN><SPAN>5</SPAN></DIV><DIV><SPAN>Pb: (</SPAN><SPAN>100</SPAN><SPAN>) Writing Flash ended with an error.</SPAN></DIV><DIV><SPAN>Ed:05</SPAN><SPAN>: File </SPAN><SPAN>'freertos_message_buffers_primary_core.elf'</SPAN><SPAN> load failure: Nn(</SPAN><SPAN>05</SPAN><SPAN>). Wire ACK Fault in DAP access</SPAN></DIV><DIV><SPAN>Nt: Loading </SPAN><SPAN>'freertos_message_buffers_primary_core.elf'</SPAN><SPAN> ELF </SPAN><SPAN>0x30002000</SPAN><SPAN> len </SPAN><SPAN>0x12044</SPAN></DIV><DIV><SPAN>Nc: Opening flash driver </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN></DIV><DIV><SPAN>Nc: request to clear DAP error failed - status </SPAN><SPAN>5</SPAN></DIV><DIV><SPAN>Pb: (</SPAN><SPAN>100</SPAN><SPAN>) Writing Flash ended with an error.</SPAN></DIV><DIV><SPAN>Ed:05</SPAN><SPAN>: File </SPAN><SPAN>'freertos_message_buffers_primary_core.elf'</SPAN><SPAN> load failure: Nn(</SPAN><SPAN>05</SPAN><SPAN>). Wire ACK Fault in DAP access</SPAN></DIV><DIV><SPAN>Nt: Loading </SPAN><SPAN>'freertos_message_buffers_primary_core.elf'</SPAN><SPAN> ELF </SPAN><SPAN>0x33FC0000</SPAN><SPAN> len </SPAN><SPAN>0x7144</SPAN></DIV><DIV><SPAN>Nc: Opening flash driver </SPAN><SPAN>MIMXRT1170_SFDP_QSPI.cfx</SPAN></DIV><DIV><SPAN>Nc: request to clear DAP error failed - status </SPAN><SPAN>5</SPAN></DIV><DIV><SPAN>Pb: (</SPAN><SPAN>100</SPAN><SPAN>) Writing Flash ended with an error.</SPAN></DIV><DIV><SPAN>Ed:05</SPAN><SPAN>: File </SPAN><SPAN>'freertos_message_buffers_primary_core.elf'</SPAN><SPAN> load failure: Nn(</SPAN><SPAN>05</SPAN><SPAN>). Wire ACK Fault in DAP access</SPAN></DIV><DIV><SPAN>Pc: (</SPAN><SPAN>100</SPAN><SPAN>) Target Operation Failed</SPAN></DIV><DIV><SPAN>Nc: request to clear DAP error failed - status </SPAN><SPAN>5</SPAN></DIV><DIV><SPAN>Nc: request to clear DAP error failed - status </SPAN><SPAN>5</SPAN></DIV><DIV><SPAN>Nc: error closing down debug session - Nn(</SPAN><SPAN>05</SPAN><SPAN>). Wire ACK Fault in DAP access</SPAN></DIV><BR /><DIV><SPAN>INFO</SPAN><SPAN>: Exact match for MIMXRT1176xxxxx:MIMXR</SPAN><SPAN>T1170</SPAN><SPAN>-EVKB found</SPAN></DIV><DIV><SPAN>INFO</SPAN><SPAN>: Selected device MIMXRT1176xxxxx:MIMXR</SPAN><SPAN>T1170</SPAN><SPAN>-EVKB</SPAN></DIV><DIV><SPAN>INFO</SPAN><SPAN>: Getting available probes</SPAN></DIV><DIV><SPAN>INFO</SPAN><SPAN>: Selecting probe by serial substring</SPAN></DIV><DIV><SPAN>INFO</SPAN><SPAN>: Selected probe #</SPAN><SPAN>1</SPAN><SPAN> H3RHID4AC30FD (MCU-LINK on-board (r0E2) CMSIS-DAP </SPAN><SPAN>V3.160</SPAN><SPAN>)</SPAN></DIV><DIV><SPAN>INFO</SPAN><SPAN>: MCU-Link firmware update `check`: Probe ([H3RHID4AC30FD] [MCU-LINK on-board (r0E2) CMSIS-DAP </SPAN><SPAN>V3.160</SPAN><SPAN>]) is already running the same firmware version as the included firmware version [</SPAN><SPAN>3</SPAN><SPAN>.</SPAN><SPAN>160</SPAN><SPAN>]</SPAN></DIV><DIV><SPAN>CRITICAL</SPAN><SPAN>: Critical error</SPAN></DIV><DIV><SPAN>ERRMSG: </SPAN><SPAN>Exception</SPAN><SPAN>: Flash operation exited with code </SPAN><SPAN><SPAN>1<BR /><BR /><BR />Also I've noticed that when when the flashing actually succeeds the M4 core is most of the time one or more versions behind even though I do a clean and rebuild of both projects before flashing. However sometimes, seemingly randomly both cores does get the correct version.&nbsp;<BR /><BR />This is the build log:&nbsp;<BR /></SPAN></SPAN><P>Executing task: CMake: build M4</P><P>Workspace is /Users/melker/CodeProjects/AudioBox/code/code_secondary_core<BR />build task started....<BR />/Users/melker/.mcuxpressotools/cmake-3.30.0-macos10.10-universal/CMake.app/Contents/bin/cmake --build /Users/melker/CodeProjects/AudioBox/code/code_secondary_core/armgcc/debug --clean-first --target all --<BR />[1/2] Cleaning additional files...<BR />[2/2] Cleaning all built files...<BR />Cleaning... 39 files.<BR />[1/39] Building ASM object CMakeFiles/freertos_message_buffers_secondary_core.elf.dir/Users/melker/CodeProjects/AudioBox/sdk/SDK_25_03_00_MIMXRT1170-EVKB/devices/MIMXRT1176/gcc/startup_MIMXRT1176_cm4.S.obj<BR />[2/39] Building C object CMakeFiles/freertos_message_buffers_secondary_core.elf.dir/Users/melker/CodeProjects/AudioBox/sdk/SDK_25_03_00_MIMXRT1170-EVKB/devices/MIMXRT1176/system_MIMXRT1176_cm4.c.obj<BR />[3/39] Building C object CMakeFiles/freertos_message_buffers_secondary_core.elf.dir/Users/melker/CodeProjects/AudioBox/sdk/SDK_25_03_00_MIMXRT1170-EVKB/devices/MIMXRT1176/drivers/fsl_common_arm.c.obj<BR />[4/39] Building C object CMakeFiles/freertos_message_buffers_secondary_core.elf.dir/Users/melker/CodeProjects/AudioBox/sdk/SDK_25_03_00_MIMXRT1170-EVKB/devices/MIMXRT1176/drivers/fsl_gpio.c.obj<BR />[5/39] Building C object CMakeFiles/freertos_message_buffers_secondary_core.elf.dir/Users/melker/CodeProjects/AudioBox/sdk/SDK_25_03_00_MIMXRT1170-EVKB/devices/MIMXRT1176/drivers/fsl_common.c.obj<BR />[6/39] Building C object CMakeFiles/freertos_message_buffers_secondary_core.elf.dir/Users/melker/CodeProjects/AudioBox/code/code_secondary_core/hardware_init.c.obj<BR />[7/39] Building C object CMakeFiles/freertos_message_buffers_secondary_core.elf.dir/Users/melker/CodeProjects/AudioBox/code/code_secondary_core/pin_mux.c.obj<BR />[8/39] Building C object CMakeFiles/freertos_message_buffers_secondary_core.elf.dir/Users/melker/CodeProjects/AudioBox/sdk/SDK_25_03_00_MIMXRT1170-EVKB/devices/MIMXRT1176/drivers/fsl_anatop_ai.c.obj<BR />[9/39] Building C object CMakeFiles/freertos_message_buffers_secondary_core.elf.dir/Users/melker/CodeProjects/AudioBox/code/code_secondary_core/board.c.obj<BR />[10/39] Building C object CMakeFiles/freertos_message_buffers_secondary_core.elf.dir/Users/melker/CodeProjects/AudioBox/sdk/SDK_25_03_00_MIMXRT1170-EVKB/devices/MIMXRT1176/drivers/fsl_mu.c.obj<BR />[11/39] Building C object CMakeFiles/freertos_message_buffers_secondary_core.elf.dir/Users/melker/CodeProjects/AudioBox/sdk/SDK_25_03_00_MIMXRT1170-EVKB/components/uart/fsl_adapter_lpuart.c.obj<BR />[12/39] Building C object CMakeFiles/freertos_message_buffers_secondary_core.elf.dir/Users/melker/CodeProjects/AudioBox/sdk/SDK_25_03_00_MIMXRT1170-EVKB/devices/MIMXRT1176/drivers/fsl_gpc.c.obj<BR />[13/39] Building C object CMakeFiles/freertos_message_buffers_secondary_core.elf.dir/Users/melker/CodeProjects/AudioBox/code/code_secondary_core/main.c.obj<BR />[14/39] Building C object CMakeFiles/freertos_message_buffers_secondary_core.elf.dir/Users/melker/CodeProjects/AudioBox/sdk/SDK_25_03_00_MIMXRT1170-EVKB/rtos/freertos/freertos-kernel/croutine.c.obj<BR />[15/39] Building C object CMakeFiles/freertos_message_buffers_secondary_core.elf.dir/Users/melker/CodeProjects/AudioBox/code/code_secondary_core/clock_config.c.obj<BR />[16/39] Building C object CMakeFiles/freertos_message_buffers_secondary_core.elf.dir/Users/melker/CodeProjects/AudioBox/sdk/SDK_25_03_00_MIMXRT1170-EVKB/rtos/freertos/freertos-kernel/list.c.obj<BR />[17/39] Building C object CMakeFiles/freertos_message_buffers_secondary_core.elf.dir/Users/melker/CodeProjects/AudioBox/sdk/SDK_25_03_00_MIMXRT1170-EVKB/devices/MIMXRT1176/drivers/fsl_pgmc.c.obj<BR />[18/39] Building C object CMakeFiles/freertos_message_buffers_secondary_core.elf.dir/Users/melker/CodeProjects/AudioBox/sdk/SDK_25_03_00_MIMXRT1170-EVKB/devices/MIMXRT1176/drivers/cm4/fsl_cache.c.obj<BR />[19/39] Building C object CMakeFiles/freertos_message_buffers_secondary_core.elf.dir/Users/melker/CodeProjects/AudioBox/sdk/SDK_25_03_00_MIMXRT1170-EVKB/rtos/freertos/freertos-kernel/timers.c.obj<BR />[20/39] Building C object CMakeFiles/freertos_message_buffers_secondary_core.elf.dir/Users/melker/CodeProjects/AudioBox/sdk/SDK_25_03_00_MIMXRT1170-EVKB/rtos/freertos/freertos-kernel/event_groups.c.obj<BR />[21/39] Building C object CMakeFiles/freertos_message_buffers_secondary_core.elf.dir/Users/melker/CodeProjects/AudioBox/sdk/SDK_25_03_00_MIMXRT1170-EVKB/rtos/freertos/freertos-kernel/portable/GCC/ARM_CM4F/port.c.obj<BR />[22/39] Building C object CMakeFiles/freertos_message_buffers_secondary_core.elf.dir/Users/melker/CodeProjects/AudioBox/sdk/SDK_25_03_00_MIMXRT1170-EVKB/devices/MIMXRT1176/drivers/fsl_dcdc.c.obj<BR />[23/39] Building C object CMakeFiles/freertos_message_buffers_secondary_core.elf.dir/Users/melker/CodeProjects/AudioBox/sdk/SDK_25_03_00_MIMXRT1170-EVKB/middleware/multicore/mcmgr/src/mcmgr.c.obj<BR />[24/39] Building ASM object CMakeFiles/freertos_message_buffers_secondary_core.elf.dir/Users/melker/CodeProjects/AudioBox/sdk/SDK_25_03_00_MIMXRT1170-EVKB/devices/MIMXRT1176/utilities/fsl_memcpy.S.obj<BR />[25/39] Building C object CMakeFiles/freertos_message_buffers_secondary_core.elf.dir/Users/melker/CodeProjects/AudioBox/sdk/SDK_25_03_00_MIMXRT1170-EVKB/devices/MIMXRT1176/utilities/fsl_sbrk.c.obj<BR />[26/39] Building C object CMakeFiles/freertos_message_buffers_secondary_core.elf.dir/Users/melker/CodeProjects/AudioBox/sdk/SDK_25_03_00_MIMXRT1170-EVKB/devices/MIMXRT1176/utilities/fsl_syscall_stub.c.obj<BR />[27/39] Building C object CMakeFiles/freertos_message_buffers_secondary_core.elf.dir/Users/melker/CodeProjects/AudioBox/sdk/SDK_25_03_00_MIMXRT1170-EVKB/rtos/freertos/freertos-kernel/stream_buffer.c.obj<BR />[28/39] Building C object CMakeFiles/freertos_message_buffers_secondary_core.elf.dir/Users/melker/CodeProjects/AudioBox/sdk/SDK_25_03_00_MIMXRT1170-EVKB/rtos/freertos/freertos-kernel/queue.c.obj<BR />[29/39] Building C object CMakeFiles/freertos_message_buffers_secondary_core.elf.dir/Users/melker/CodeProjects/AudioBox/sdk/SDK_25_03_00_MIMXRT1170-EVKB/devices/MIMXRT1176/drivers/fsl_lpuart.c.obj<BR />[30/39] Building C object CMakeFiles/freertos_message_buffers_secondary_core.elf.dir/Users/melker/CodeProjects/AudioBox/sdk/SDK_25_03_00_MIMXRT1170-EVKB/devices/MIMXRT1176/drivers/fsl_clock.c.obj<BR />[31/39] Building C object CMakeFiles/freertos_message_buffers_secondary_core.elf.dir/Users/melker/CodeProjects/AudioBox/sdk/SDK_25_03_00_MIMXRT1170-EVKB/devices/MIMXRT1176/drivers/fsl_soc_src.c.obj<BR />[32/39] Building C object CMakeFiles/freertos_message_buffers_secondary_core.elf.dir/Users/melker/CodeProjects/AudioBox/sdk/SDK_25_03_00_MIMXRT1170-EVKB/rtos/freertos/freertos-kernel/tasks.c.obj<BR />[33/39] Building C object CMakeFiles/freertos_message_buffers_secondary_core.elf.dir/Users/melker/CodeProjects/AudioBox/sdk/SDK_25_03_00_MIMXRT1170-EVKB/middleware/multicore/mcmgr/src/mcmgr_mu_internal.c.obj<BR />[34/39] Building C object CMakeFiles/freertos_message_buffers_secondary_core.elf.dir/Users/melker/CodeProjects/AudioBox/sdk/SDK_25_03_00_MIMXRT1170-EVKB/devices/MIMXRT1176/drivers/fsl_pmu.c.obj<BR />[35/39] Building C object CMakeFiles/freertos_message_buffers_secondary_core.elf.dir/Users/melker/CodeProjects/AudioBox/sdk/SDK_25_03_00_MIMXRT1170-EVKB/middleware/multicore/mcmgr/src/mcmgr_internal_core_api_imxrt1170.c.obj<BR />[36/39] Building C object CMakeFiles/freertos_message_buffers_secondary_core.elf.dir/Users/melker/CodeProjects/AudioBox/sdk/SDK_25_03_00_MIMXRT1170-EVKB/devices/MIMXRT1176/utilities/debug_console_lite/fsl_assert.c.obj<BR />[37/39] Building C object CMakeFiles/freertos_message_buffers_secondary_core.elf.dir/Users/melker/CodeProjects/AudioBox/sdk/SDK_25_03_00_MIMXRT1170-EVKB/devices/MIMXRT1176/utilities/debug_console_lite/fsl_debug_console.c.obj<BR />[38/39] Building C object CMakeFiles/freertos_message_buffers_secondary_core.elf.dir/Users/melker/CodeProjects/AudioBox/sdk/SDK_25_03_00_MIMXRT1170-EVKB/devices/MIMXRT1176/utilities/str/fsl_str.c.obj<BR />[39/39] Linking C executable freertos_message_buffers_secondary_core.elf<BR />Memory region Used Size Region Size %age Used<BR />m_interrupts: 1 KB 1 KB 100.00%<BR />m_text: 27876 B 127 KB 21.44%<BR />m_data: 3280 B 127 KB 2.52%<BR />m_ncache: 0 GB 256 KB 0.00%<BR />m_data2: 0 GB 256 KB 0.00%<BR />m_heap: 1 KB 1 KB 100.00%<BR />rpmsg_sh_mem: 6 KB 8 KB 75.00%<BR />build finished successfully.<BR />* Terminal will be reused by tasks, press any key to close it.</P><P>* Executing task: CMake: build</P><P>Workspace is /Users/melker/CodeProjects/AudioBox/code/code_primary_core<BR />build task started....<BR />/Users/melker/.mcuxpressotools/cmake-3.30.0-macos10.10-universal/CMake.app/Contents/bin/cmake --build /Users/melker/CodeProjects/AudioBox/code/code_primary_core/armgcc/flexspi_nor_debug --target all --<BR />[1/2] Building C object CMakeFiles/freertos_message_buffers_primary_core.elf.dir/Users/melker/CodeProjects/AudioBox/code/code_primary_core/main.c.obj<BR />[2/2] Linking C executable freertos_message_buffers_primary_core.elf<BR />Memory region Used Size Region Size %age Used<BR />m_flash_config: 512 B 3 KB 16.67%<BR />m_ivt: 48 B 4 KB 1.17%<BR />m_interrupts: 1 KB 1 KB 100.00%<BR />m_text: 72188 B 65271 KB 0.11%<BR />m_qacode: 0 GB 256 KB 0.00%<BR />m_data: 22968 B 256 KB 8.76%<BR />m_data2: 0 GB 504 KB 0.00%<BR />rpmsg_sh_mem: 6 KB 8 KB 75.00%<BR />m_core1_image: 28996 B 256 KB 11.06%<BR />build finished successfully.<BR />* Terminal will be reused by tasks, press any key to close it.<BR /><BR /><BR />What could be causing this?<BR /><BR />I will try J-link firmware and see if that helps.</P></DIV></DIV> Thu, 18 Sep 2025 07:28:22 GMT https://community.nxp.com/t5/i-MX-RT-Crossover-MCUs/RT1170-EVKB-Multicore-project-and-LinkServer-Flash-programmer/m-p/2171731#M35223 cyberhelmer 2025-09-18T07:28:22Z