IMXRT1064 Firmware Update Using ROMAPI

irshadkn — Wed, 22 Feb 2023 14:19:56 GMT

I am implementing a bootloader for IMX.RT1064. I'm using ROM API to erase and program the new firmware. I'm trying to erase the section after the bootloader and it is not working. When I tried erasing the sector that doesn't has the program, the erase API worked. Whether the sectors with the program is protected? Our goal is to implement a bootloader that can read the firmware from the external SPI flash and program to the internal flash.

Re: IMXRT1064 Firmware Update Using ROMAPI

diego_charles — Wed, 01 Mar 2023 18:27:22 GMT

Hi @irshadkn

I hope you are doing well!

I do not think that you are getting some sectors protected. Could you provide me further details about your implementation?

For example : Memory addresses, are you are using the ROM API functions to erase the RT1064's 4 MB QSPI flash in chip?, return values from APIs etc. Some code excerpt where the issue can be reproduced.

Below some information that migth help.

In the RT1064 RM (IMXRT1064RM) page 261 , under this paragraph The following is a typical use case of the FlexSPI NOR API we have an example of the NOR API.

The RT1064 can only do XIP boot from RT1064's 4 MB QSPI flash in chip.

Best regards,

Diego

i.MX RT Crossover MCUs中的主题 Re: IMXRT1064 Firmware Update Using ROMAPI

IMXRT1064 Firmware Update Using ROMAPI

Re: IMXRT1064 Firmware Update Using ROMAPI