https://community.nxp.com/t5/i-MX-RT-Crossover-MCUs/Burn-eFuses/m-p/1549827#M22391 <P>Thank you so much for your interest in our products and for using our community.</P> <P>The simplest way to burn eFuses is using the <A href="https://github.com/NXPmicro/mcu-boot-utility" target="_blank" rel="noopener">NXP MCU Boot Utility</A>.</P> <P>I hope this will help you.</P> <P>Have a nice day!</P> Mon, 07 Nov 2022 17:19:44 GMT _Leo_ 2022-11-07T17:19:44Z https://community.nxp.com/t5/i-MX-RT-Crossover-MCUs/Burn-eFuses/m-p/1545800#M22268 <P>Hello</P><P>I hope you will help me.</P><P>Is there any possibility to burn&nbsp;eFuses&nbsp;by&nbsp;jlink?<BR />I found possible solutions using&nbsp;u-boot, but is there any simpler&nbsp;solution?</P><P>Best regards</P><P>&nbsp;</P> Fri, 28 Oct 2022 18:49:10 GMT https://community.nxp.com/t5/i-MX-RT-Crossover-MCUs/Burn-eFuses/m-p/1545800#M22268 gronoarona 2022-10-28T18:49:10Z https://community.nxp.com/t5/i-MX-RT-Crossover-MCUs/Burn-eFuses/m-p/1549827#M22391 <P>Thank you so much for your interest in our products and for using our community.</P> <P>The simplest way to burn eFuses is using the <A href="https://github.com/NXPmicro/mcu-boot-utility" target="_blank" rel="noopener">NXP MCU Boot Utility</A>.</P> <P>I hope this will help you.</P> <P>Have a nice day!</P> Mon, 07 Nov 2022 17:19:44 GMT https://community.nxp.com/t5/i-MX-RT-Crossover-MCUs/Burn-eFuses/m-p/1549827#M22391 _Leo_ 2022-11-07T17:19:44Z