i.MX RT Crossover MCUsのトピックRe: MIMXRT1176 Cannot Boot code using SDRAM

MIMXRT1176 Cannot Boot code using SDRAM

razools — Wed, 21 Sep 2022 17:25:26 GMT

Hi,

I am unable to bootup code using SDRAM. I am using lwip_dhcp_freertos_cm7 example. Following are my settings:

MCU Settings

Preprocessor Settings:PreProcessor Settings

Linker SettingsLinker Settings

However, Code Boots up fine I don't link application to RAM. It also works fine when using SRAM_DTC_cm7.

Following is the error I am getting when i hit debug buttonError

Re: MIMXRT1176 Cannot Boot code using SDRAM

jeremyzhou — Thu, 22 Sep 2022 07:06:28 GMT

Hi @razools ，
Thank you for your interest in NXP Semiconductor products and for the opportunity to serve you.
To provide the fastest support, please refer to the post.
Have a great day,
TIC

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
------------------------------------------------------------------------------

Re: MIMXRT1176 Cannot Boot code using SDRAM

razools — Thu, 22 Sep 2022 18:05:03 GMT

Thanks @jeremyzhou
with the post you mentioned above
i am able to bootup my application directly on SDRAM