topic Re: i.MXRT106L ADC configuration and drivers in i.MX RT Crossover MCUs

i.MXRT106L ADC configuration and drivers

Alex_SRL — Fri, 12 Nov 2021 02:44:59 GMT

Hi,

I am using SLN-LOCAL-IOT and need to add some external sensors to it's ADC interface - going to use both ADCs. Looking through the SDK I haven't found any reference to the ADC except the registers configuration in MIMXRT106L.h and MIMXRT106L_features.h. There ar no fsl_adc.x drivers available.

Also, when trying to configure it using Config Tools (pins, peripherals) I get error "Peripherals tool does not support selected processor " and there is no option to update the tools.

Could you please point me to an application note/code that can be used for SLN-Local-IOT configuration. and how can I resolve the configuration tools issue?

Thank You,

Alex

Re: i.MXRT106L ADC configuration and drivers

kerryzhou — Mon, 15 Nov 2021 11:03:24 GMT

Hi @Alex_SRL

About the ADC code, you need to check the RT1060 sdk ADC driver:

SDK_2_10_1_EVK-MIMXRT1060\boards\evkmimxrt1060\driver_examples\adc

About the ADC pins, please check your RT106L board, whether it fanout the ADC pins or not, please check the schematic at first.

Best Regards,

kerry

Re: i.MXRT106L ADC configuration and drivers

Alex_SRL — Tue, 16 Nov 2021 00:24:52 GMT

Hi @kerryzhou thanks, I've found the information I need in the RT1060 sdk (driver and code example)

Re: i.MXRT106L ADC configuration and drivers

kerryzhou — Tue, 16 Nov 2021 02:52:39 GMT

You are always welcome!

If you have any issues in the future, welcome to create the new case.

Best Regards,

Kerry