i.MX RT Crossover MCUsのトピックRe: IMXRT1024 UART Terminal Output Issue in Manual Configuration

IMXRT1024 UART Terminal Output Issue in Manual Configuration

Lukas_Frank — Wed, 30 Jun 2021 06:45:46 GMT

Hi all,

UART Write and Read operations prints data to terminal screen (serial port configuration) successfully in SDK Pooling Example. But, there is not printing data to terminal screen when I create a project from scratch despite data communication is successfully occur. Why could be my example is not printing to terminal?

Thanks and Regards.

Re: IMXRT1024 UART Terminal Output Issue in Manual Configuration

jeremyzhou — Wed, 30 Jun 2021 09:48:16 GMT

Hi,
Thank you for your interest in NXP Semiconductor products and for the opportunity to serve you.
According to your statement, it seems like the print function doesn't link to UART Write successful, so I was wondering if you can describe the steps you created for a new project in detail.
Have a great day,
TIC

-------------------------------------------------------------------------------
Note:
- If this post answers your question, please click the "Mark Correct" button. Thank you!

- We are following threads for 7 weeks after the last post, later replies are ignored
Please open a new thread and refer to the closed one, if you have a related question at a later point in time.
-------------------------------------------------------------------------------

Re: IMXRT1024 UART Terminal Output Issue in Manual Configuration

Lukas_Frank — Thu, 01 Jul 2021 06:40:55 GMT

Hi Dear @jeremyzhou,

I will try to link them. Then, I'll turn here again.

Thanks and Regards.